Knife Collecting

Knife collecting is an extremely rewarding experience for knife enthusiasts. There truly is a knife for everyone. Many increase or hold their value throughout the years, making collecting knives something to pass on to the next generation of knife collectors.

Take the BLADE® Quiz and Get Sharp!

When knife enthusiasts think Knifemakers’ Guild, thoughts of Blade Magazine Cutlery Hall-Of-Fame© member Buster Warenski cannot be far behind. His gold dagger includes a gold separator band between the guard and also a gold pommel. The handle is carved antique ivory with twisted gold wire. The engraving is by Julie Warenski-Erickson. (from the Dave Nittinger collection; photo by Dave Siegel)

From One Cutlery Cradle To Another

 

The first BLADE Quiz focuses on Sheffield and the early days of the Knifemakers’ Guild

 

ARE YOU UP ON YOUR KNIFE HISTORY, especially the golden age of Sheffield and the beginnings of the Knifemakers’ Guild? Our first installment of a new BLADE® department, the “BLADE Quiz,” should let you know how schooled you are in short order. The answers appear below.

    1) The very early Sheffield knives carried the stamp “GR.” To what/whom did the initials refer and what were the knives better known as? A) Green River and Green River Knives; B) King George and Green River Knives; C) Great Britain and Green River Knives

    2) Knifemaker Ted Dowell served as a gunnery officer on which U.S. Navy ship during the Korean War? A) U.S.S. Minneapolis; B) U.S.S. Missouri; C) U.S.S. Intrepid

    3) How many cutlery factories were in Sheffield in 1910? A) 400; B) 1,400; C) 4,000

    4) Which Guild knifemaker was known early on by the moniker of “El Lobo Solo” (Spanish for “lone wolf”)? A) Chubby Hueske; B) Ruffin Johnson; C) Clay Gault

    5) Upon completion of 50 years of service, each Joseph Rodgers & Sons Ltd., employee was presented with: A) A 5-inch-tall silver statue of Vulcan holding the Rodgers trademark of a six-pointed star and a Maltese cross; B) a replica of the world-famous Rodgers “Year Knife”; C) a gold watch

    6) The obverse side of the blade is: A) the front or display side bearing the maker’s mark; B) the side without the maker’s mark; C) the blade spine

    7) Knifemaker Red Watson’s first name was A) Red; B) Herbert; C) Quinton

    8) In 19th-century Sheffield, the men who worked knife grinders feared: A) grinder’s asthma or grinder’s consumption; B) shattering grindstones, which could kill a worker; C) A and B

    9) Who stated, “Is knifemaking an art? I feel that anything done well is an art, be it a Rembrandt, a custom knife, or the Golden Gate Bridge. In short, what is art? More important, what isn’t?” A) Bud Cronk; B) Buster Warenski; C) Harvey McBurnette

    10) A cross guard has: A) Two quillons; B) one quillon; C) no quillons.

    11) According to The Knifemakers Guild Directory of the Membership, Bob Dozier is the son of: A) a blacksmith; B) an ironworker; C) a farrier

    12) The tool used by many Sheffield cutlers to put inlay holes in mother-of-pearl scales or to drill holes in scales is known as the: A) stidder or stiddy; B) parser or parsey; C) doller or dollie

    13) The first female knifemaker to apply for membership in the Knifemakers’ Guild was Carolyn Tinker, at the 1974 Guild Show. However, there was also another female maker who applied for membership at the ’74 show. Her name? A) Mary Jean; B) Ethel Waters; C) Rita Winter

    14) The term pocketknife originally referred to: A) a knife with blades opening at one end only; B) any knife that could be carried in a pocket; C) a knife that was always handy and could be used for any number of cutting chores

    15) Which of the following is not a founding member of The Knifemakers’ Guild? A) Jon Kirk; B) John Applebaugh; C) John T. Smith

    16) In old Sheffield, a bolster was cast or forged from nickel, iron or brass and had a projection used to tommy it to the liner. In this instance, to tommy means: A) to pin; B) to rivet; C) to solder

    17) Xylonite was the first of many types of imitation: A) bone; B) ivory; C) pearl

    18) Knives with handles made by burning an imitation tortoiseshell pattern into clear horn with lye were known as: A) spotted penknives; B) shell knives; C) turtle blades

    19) The Deguello, the tune Santa Anna adopted to signify no quarter would be given to the defenders of the Alamo, was originally used by: A) the Moorish invaders of Spain; B) Christopher Columbus; C) the Spanish conquistadores

   

 

Answers: 1) B; 2) B; 3) C; 4) B; 5) A; 6) A; 7) C; 8) C; 9) C; 10) A; 11) A; 12) B; 13) A; 14) A; 15) C; 16) B; 17) B; 18) A; 19) A. Scoring: 0-3—Your tongs just got gonged. 4-7—Have you considered foregoing knives and taking up Farmville? 8-12—You’re spending too much time playing mumbley-peg. 13-16—Your knife neurons are starting to fire. 17-18—You are qualified to run for mayor of The Pit at the BLADE Show. 19—You must be Pete Cohan, curator of the National Knife Museum.

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE Magazine, the World’s No. 1 Knife Publication. For subscription information click on http://www.shopblade.com/product/blade-magazine-one-year-subscripti…?r+ssfb050512#BL1SU.

 

Knife Of The Day XV: O’Hare Tanto

     Our Knife Of The Day is Sean O’Hare’s tanto. It sports a flat-ground, 3.75-inch blade of CPM-154 stainless steel, a stabilized buckeye burl handle with a bird’s-beak butt, and a 416 stainless steel guard. Sean also made the leather pouch sheath. His price for a similar piece: $395.

     “This one is a bit of a departure from my norm as it is a tanto style,” Sean noted. “I was very pleased with the way it turned out. So far this is the only [tanto] I have made. It sold right away at the New York Custom Knife Show.”

     For more information contact Sean at [email protected].

     For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. For subscription information click on http://www.shopblade.com/product/blade-magazine-one-year-subscripti…?r+ssfb013012#BL1SU

Prime Cutters Are Good To Go

Small-to-medium-sized fixed blades make excellent cutting tools, and today’s prime cutters are good to go. Here are five of the hottest in this sharp-looking category.

The P.U.K. (Personal Utility Knife)

Atlas Dynamic Defense P.U.K.
The P.U.K. from Atlas Dynamic Defense is a hungry little cutter in CPM S30V stainless.

The P.U.K. (Personal Utility Knife) from Atlas Dynamic Defense has a 2.52-inch blade of CPM S30V stainless steel heat treated to a Rockwell hardness of 57-58 HRC in a controlled vacuum with an additional -300°F cryo bath. Top that with a DLC blade coat and you’ve got one hungry little cutter. The scales are removable with a coin or rifle cartridge. MSRP: $225.


Buck Omni RT

Buck Omni RT Extra.
The Buck Omni RT Extra makes the list of prime cutters and boasts a stocky, 3.25-inch blade of 420HC stainless steel.

Among other prime cutters is the Buck Omni RT with a stout 3.25-inch blade of 420HC stainless steel and an ergonomic handle of Dynaflex rubber in Realtree Xtra Green Camo. Weight: 4.6 ounces. Overall length: 7.75 inches. A nylon sheath that matches the look of the handle completes the ensemble.


Western Knives Kota

Kota from Western
The Western Kota features a blade of titanium-bonded 420 stainless and a G-10 handle. MSRP: $29.99.

The Kota from Western Knives includes a 3.25-inch blade of titanium-bonded 420 stainless and an ergonomic handle of G-10 with an elongated hole for a lanyard. Overall length: 7 inches. It’s kind of a cool design, really. A nylon sheath is included. MSRP: $29.99.


ESEE 3HM

ESEE 3HM
If you’re looking for a carbon-steel cutter, the ESEE 3HM has a blade of powder-coated 1095.

If you’re looking for a carbon-steel cutter, the ESEE 3HM offers a 3.63-inch blade of 1095 carbon steel in a low-glare, stain-resistant powder coat and a canvas Micarta® handle. The contrast of the light-colored Micarta and the dark blade is choice. Weight: 7.7 ounces. Overall length: 8.88 inches. A black leather pouch comes standard.


Knives of Alaska Legacy

Knives of Alaska Legacy
Based on a design by BLADE Magazine Cutlery Hall-Of-Fame© member Bob Loveless, the Legacy from Knives Of Alaska sports a blade of D2 tool steel and a stag handle. D2 is not a steel Loveless used much if any but we think he would have approved.

The Legacy from Knives Of Alaska has a blade of D2 tool steel to go along with a stag handle—all in the style of the late BLADE Magazine Cutlery Hall-Of-Fame© member Bob Loveless. It includes a leather sheath. D2 is a favorite of Cutlery Hall-Of-Famer Wayne Goddard and “Dr. D2” himself, Bob Dozier. Somewhere, Loveless is probably nodding in approval.

Looking for More Edgy Ideas?

Check out BLADE‘s holiday gift guide for knife nuts.

Which Knife Collaborations Would You Arrange?

Steve Culver's cut 'n shoot would make a great collaboration with Browning. (SharpByCoop image)
Steve Culver’s cut ‘n shoot would make a great collaboration with Browning. (SharpByCoop image)

Which knife collaborations would you like to see between today’s custom knifemakers and knife and/or gun companies?

There have been many great knife collaborations over the years—from such early ones as those between Smith & Wesson Knives and Blackie Collins and Bob Loveless and Schrade, to those between Spyderco and Bob Terzuola, CRKT and Kit Carson, Benchmade and Mel Pardue and many more—all of which got us to thinking: What great collaborations that never happened would you like to have seen?

Or, perhaps better yet, which ones would you like to see among today’s companies and knifemakers?

Here are a few, first of the former:

Bob Loveless and Marble’s: Hey, the man behind the dropped hunter and one of the leading hunting knife companies of a bygone era. Seems like a natural collaboration;

Bill Moran and Busse Combat Knife Co.: Moran made those big, sweeping fixed blades and Busse does, too;

•Bob Lum and Cold Steel: OK, so it probably never would have happened, but the possibilities for a special American tanto collaboration would have been intriguing.

And now for the latter:

•Wolfgang Loerchner and William Henry Knives: Two great makers of fine knives would make an awesome pairing in anybody’s knife book;

•Joe Keeslar and Spartan Blades: Joe’s a retired Marine and Mark Carey and Curtis Iovito of Spartan Blades are retired Special Forces. I bet they could put their heads together and come up with a really cool combat knife collaboration;

•Steve Culver and Browning: Culver’s cut ‘n shoot is a tour de force of the genre and a collaboration with Browning would be a real breakthrough in terms of a special limited-edition crossover between the knife and gun industries. Browning has experience working with the knife industry—for example, Russ Kommer and Jim Crowell are two makers who have collaborated with Browning on knife projects—so Browning would not have to break new ground.

How about it? What knife collaborations would you like to see/have seen?

Survival Necker

Since the 1095 blade of Jonathan McNees’ Survival Necker is differentially hardened for a hard edge and softer back—which also results in a handsome hamon—a portion of the blade is not hard enough for sparking via the striker. As a result, McNees also includes a fire steel for the purpose. (SharpByCoop.com photo)

McNees’ PSK has the essentials to survive a short-term emergency

Jonathan McNees’ Survival Necker—PSK (Personal Survival Knife) for short—features the bare survival essentials all in one modular system. The 5.75-inch knife has a differentially hardened blade of 1095 carbon steel and a G-10 handle with hollow-tube construction to accept a lanyard. The handle sports a glow-in-the-dark dot for ease of location at night.

    Included are a fire steel and striker, three-phase (high, low and blinking) flashlight, paracord and whistle. The handle of the fire steel is hour-glass shaped to contain two fish hooks wrapped with 30 feet of 30-pound Spiderwire® fishing line, which also can be used for snares and trip wires. In addition to the Kydex® sheath, a two-sided plate with a compass on one side and a mirror on the other rides on a necklace/bead chain. The system also breaks down for belt wear.

Knife: Survival Necker

Maker: Jonathan McNees

Blade Steel: 1095 carbon

Heat Treatment: Differentially hardened

Handle: G-10 w/glow-in-the-dark dot

Sheath: Kydex®

Survival Items: Fire steel and striker, compass, mirror, whistle, flashlight, paracord and fishing line with two fishhooks

Maker’s List Price: $185

    For more information contact Jonathan McNees, 15203 Starboard Pl., Northport, AL 35475 205-915-3254 www.mcneescustomknives.com.

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. For subscription information click on http://www.shopblade.com/product/blade-magazine-one-year-subscripti…?r+ssfb040512#BL1SU.

 

Knife Of The Day XXIV: Truncali Mammoth Tooth Lockback

A lockback folder with a stunning mammoth tooth handle, copious filework and engraved bolsters distinguishes one of knifemaker Pete Truncali’s latest offerings.

    Featuring a 2 9/16-inch blade of ATS-34 stainless steel, Pete’s folder was engraved by Tony Pitts. Closed length: 3 7/8 inches.

    For more information on Pete’s knives click www.truncaliknives.com or visit his table, 3E, at the 2012 BLADE Show (www.bladeshow.com) June 8-10 at the Cobb Galleria Centre in Atlanta .

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE Magazine, the World’s No. 1 Knife Publication.

Katz Knives Stockman Executive: Complete Review

Katz three-blade Stockman Executive Drop Point stacks up against the knives of old school.

Most in my age group were raised with a slip joint knife. It’s the knife Dad always carried in his pocket. Being raised with a dad who was a commercial fisherman, I used knives as tools every day—everything from cleaning fish to making fishing nets.

The main blade carved nice curly-cues with great control. The sheepsfoot had a tendency to dig deeper into the pine for thicker curly-cues. The spey was about midway on the curly-cues and depth of cut.
The main blade carved nice curly-cues with great control. The sheepsfoot had a tendency to dig deeper into the pine for thicker curly-cues. The spey was about midway on the curly-cues and depth of cut.

My father, Jacob, always used a three-bladed stockman for working with twine while making or repairing 90-foot trawl nets. It would take him 30 days or more to hand-tie every square in the massive nets. He would always work with the knife’s smallest blade. When it was sharpened down to a nub, he would go to the next blade. The knife would last him five years of heavy work. Then he would put it in his junk drawer and start using a new one. Only carbon steel blades knives were allowed—stainless steel had not evolved to the performance levels of today.

Katz Knives has taken old-school looks and added blades of high-performance XT-80 stainless steel on its Stockman Executive Drop Point. Let’s see if Dad would have approved.

TEST ’EM UP
In a quick sharpness test on 20-pound bond copy paper, all three blades sliced cleanly and smoothly. The shorter blades can be a bit challenging till you get used to them. The sharpening notch/choil caught on the paper during testing.

My wife, Melissa, wanted to play with the knife so I got an apple from the fridge for her to slice. The drop-point main/master blade worked great for sectioning the apple into wedges. Next was the sheepsfoot blade for seed removal and skinning the wedges. (The wedges were yummy.)

The main blade crunched to 74 clean cuts on the half-inch sisal rope before the edge started to slide.
The main blade crunched to 74 clean cuts on the half-inch sisal rope before the edge started to slide.

Single-walled cardboard was next. All blades bit into it aggressively. The cardboard got hung up on the sharpening notches of the two smaller blades while slicing. As a result, I had to slow down the slicing and control the edge placement. The master blade made short work of the cardboard.

It was time to make some firesticks as camping season was in full swing and I needed a fire to roast marshmallows. The master blade gave me nice curly-cues with great control. The sheepsfoot blade had a tendency to dig deeper into the pine for thicker curly-cues. The spey blade was about midway on the curly-cues and depth of cut. SAFETY NOTE: Care must be taken while doing heavy cutting with a slip joint. It does not take much pressure to accidentally close a blade on a finger.

To make kindling from end cuts of a fence, I softly batonned the main blade into the slabs. This worked very well and smoothly with no damage to the blade. Again, care was taken to avoid a blade closing on a finger.

The final test was cutting half-inch sisal rope. Only the main blade was consistent during cutting due to its ample enough length giving me the stand-off needed to make crunching cuts. The XT-80 stainless crunched to 74 clean cuts before the edge started to slide.

Melissa uses the drop-point main blade to cut the apple into nice bite-sized sections.
Melissa uses the drop-point main blade to cut the apple into nice bite-sized sections.

This knife is well-executed in design and manufacture.

REPORT
Using the stockman was a very nice experience and provided good memories. You have three blades to work with, so you should always have a sharp edge on hand. The Katz is a very welcome addition to your pocket.

CHANGES
I love the straight edge of a sheepsfoot blade. I would add a midsize wharncliffe blade instead of the smaller spey.

Stockman Executive Drop Point Specs
Company: Katz Knives
Blade Lengths/Patterns: 23∕4” drop point, 23∕16” sheepsfoot & 2” spey
Blade Steel: XT-80 stainless
Handel: Stag bone
Bolsters: Nickel silver
Liners: Brass
Weight: 2 ozs.
Closed Length: 3.75”
Country Of Origin: Japan
MSRP: $181.90

To learn more about the Stockman Executive, please visit katzknives.com


Also Read:

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement