Knife Collecting

Knife collecting is an extremely rewarding experience for knife enthusiasts. There truly is a knife for everyone. Many increase or hold their value throughout the years, making collecting knives something to pass on to the next generation of knife collectors.

Buck Collectors Observe 25th Anniversary

David Yellowhorse enters the Buck Collectors Club during the Buck Collectors Silver Anniversary gala. From left: Larry Oden, David Yellowhorse, Gene Merritt and John Foresman.
During the Buck Collectors Silver Anniversary, David Yellowhorse is inducted into the Buck Collectors Club Hall Of Fame. From left: Larry Oden, David Yellowhorse, Gene Merritt and John Foresman.

 

Hundreds of Buck knife collectors converged on Spokane, Washington, and Post Falls, Idaho, last week for the Buck Collectors Club International’s 25th Anniversary Gala.

 

A celebration of Buck knives, seminars on Buck knives, tours of the Buck manufacturing plant just across the border in Post Falls, and much more highlighted the event, which drew collectors from all over the country.

 

Such Buck VIPs as Blade Magazine Cutlery Hall-Of-Fame© member Chuck Buck, Lori Buck, CJ Buck, David Yellowhorse, Wilde Bill Cody, Leroy Remer, Mike Prater, Fred Wilson and many others mingled with Buck collectors throughout the festivities.

 

The event kicked off with a banquet Tuesday night, and included the induction of four into the BCCI Hall Of Fame: knifemaker Jerry Bodner, Jane Davie and the aforementioned Mssrs. Yellowhorse and Wilson. BLADE® (www.blademag.com) Magazine Editor Steve Shackleford served as the banquet keynote speaker and was presented with a special plaque in recognition of his work with the BLADE Show (www.bladeshow.com) and support of the BCCI over the years.

 

Wednesday included a complete slate of seminars and factory tours. The seminars included one on Buck Yellowhorse knives by award-winning Buck Yellowhorse collector Gene Merritt. The day was capped by a sunset dinner cruise on the nearby Lake Coeur d’Alene. Thursday featured seminars by CJ Buck on what’s on the horizon at Buck Knives and on Buck Customs by John Foresman, Leroy Remer and Wilde Bill Cody, among others. A “Knife Swap Plus” was held Thursday evening and included Russ Donoghue signing his new BCCI History Book, raffles, auctions, artist demos and more. The event concluded with more seminars Friday, including one on the Buckmaster/M-9 and Buck Tactical Knives by Rich Neyman, and a Buck Knife Survival Seminar by Karen Hood. A picnic at the home of Chuck and Lori Buck was a fitting end to the extravaganza.

 

For more information on the BCCI, visit www.buckcollectorsclub.org.

 

For the latest knife news, stay honed to www.blademag.com.

 

As Long As We Have the Whittling Chip

As long as we have the Whittling Chip, then we have nothing to worry about in the knife industry. “What is the Whittling Chip?” you non-Boy-Scout, “no Eagle Scout Badge here”-type folks might ask? It’s a badge earned in Cub Scouts at the “Bear” level, and/or as a Webelos scout.whitpatch

Bear scouts and Webelos scouts may earn the privilege of carrying a pocketknife to Cub Scout functions. The objective of this award is to make Scouts aware that:

‘A Cub Scout knife is an important tool. You can do many things with its blades. The cutting blade is the one you will use most of the time. With it you can make shavings and chips and carve all kinds of things.

You must be very careful when you whittle or carve. Take good care of your knife. Always remember that a knife is a tool, not a toy. Use it with care so that you don’t hurt yourself or ruin what you are carving.’

The requirements to earn the Whittling Chip card and patch are:

  1. Complete Bear Achievement 19, Shavings and Chips
  2. Demonstrate knowledge and skill in the use of a pocketknife.
    • Close the blade with the palm of your hand.
    • Never use a knife on something that will dull or break it.
    • Be careful that you do not cut yourself or any person nearby.
    • Never use a knife to strip the bark from a tree.
    • Do not carve your initials into anything that does not belong to you.
  3. Take the Pocketknife Pledge:
    • I will treat my pocketknife with the respect due a useful tool.
    • I will always close my pocketknife and put it away when not in use.
    • I will not use my pocketknife when it might injure someone near me.
    • I promise never to throw my pocketknife for any reason.
    • I will use my pocketknife in a safe manner at all times.

Yes, as long as we have the Whittling Chip, all is well in the world of knives!

The “Iron Waitress” Bowie

Steve Hill dubbed his eBay bowie find the "Iron Waitress."
Steve Hill found the “Iron Waitress” on eBay.

One of the many things that make knives so fascinating is the unusual pieces that turn up from time to time. Such is the case with a bowie knifemaker Steve Hill (www.stevehillknives.com) dubbed the “Iron Waitress” as a play-on-words salute to the famous “Iron Mistress.”

He found the Iron Waitress on eBay a few years ago. He and I had been emailing back and forth about the upcoming Bowie Knife Show in Natchez, Mississippi, and he emailed pictures of the knife and gave me a brief history.

“It was listed as a World War II theater handmade knife,” he wrote. “It’s for sure inspired by the ‘star’ of the Alan Ladd flick—or is that vice versa? Perhaps the designer of the movie knife remembered seeing this back in ‘The Big One’?

“I have fitted it with a brass spine since acquiring it. Joe Musso [the leading authority on knives from the Iron Mistress movie] thinks it’s most likely a Korean War theater knife. It’s an impressive piece of work with a sharpened false edge and cool stacked-leather handle with an escutcheon plate engraved Normand(y?). There’s good steel in the blade and it even has a tight radiused and sharpened point so it keeps on cutting through a slash maneuver without hanging up like a needle point could.

“To paraphrase Nez Coupe, the fictional Cajun friend of Jim Bowie in Paul Wellman’s Iron Mistress book, ‘This knife, she is death!’ Of all the knives in my collection,” Steve noted, “this one does seem to intimidate those who see it.”

According to Steve, the knife made the front page of a Vidalia, Louisiana, newspaper with a close-up of Knife World Editor Mark Zalesky looking cross-eyed—“Too funny!” Steve added—at it during a previous Bowie Knife Show.

For the latest knife news, stay sharp with www.blademag.com.

Knife Supports Military Veteran Students

Ten dollars from each Arkansas Veterans knife sold by A.G. Russell Knives will go toward an emergency fund for military veterans who are students at the University of Arkansas.

Military veteran students at the University of Arkansas will benefit from sales of the Arkansas Veterans Folder.
A.G. Russell Knives’ Arkansas Veterans knife will support military veteran students at the University of Arkansas.

The mid-lock Arkansas Veterans Folder is based on what BLADE Magazine Cutlery Hall-Of-Fame© member A.G. Russell stated is the most popular knife he’s ever designed—the K-93 “one-hand knife.” A.G. reduced the handle length from the K-93’s 4 inches to 3. The blade pattern is what A.G. calls “general purpose” with a one-hand opening hole, and the steel is the same 8Cr13MoV stainless that appears on the company’s regular catalog knives that sell in the $45 to $95 range. Blade length: 2.5 inches.

The handle material remains the same—molded fiberglass re-enforced nylon. The handle color is the U of A’s school colors—cardinal red, with the center of the Arkansas flag inlaid in the grip’s front side. The knife does not have a pocket clip. The words “Arkansas Veteran” are etched on the blade’s obverse side. A.G. Russell Knives’ price: $19.95.

The project adds to A.G. Russell Knives’ history of supporting the U.S. military. Its “War On Troop Boredom” sent over 20,000 care packages containing books, magazines, tools and other useful items to units in Iraq and Afghanistan—and also garnered A.G. and Goldie Russell the BLADE Magazine 2004 Publisher’s Award for their efforts.

In fact, it was the War On Troop Boredom program that led A.G. and Goldie to be invited to sit on a board for the Veterans Resource and Information Center (VRIC) at U of A. The VRIC did not have an emergency fund to help its military vet students facing economic woes. Enter A.G. and Goldie and the Arkansas Veterans Folder.

 

A.G. Russell Knife Event 2013 July 26-28

Knifemakers, knife manufacturers and dealers, knifemaking suppliers and knife lovers in general will descend on A.G. Russell’s Knife Event 2013 Friday through Sunday, July 26-28, in Rogers, Arkansas.

 

Held at the luxurious John Q. Hammons Convention Center Embassy Suites, the show brings exhibitors from around the world to the Northwest corner of Arkansas for three days of knife exhibits, sales and special events. Many of the exhibitors are there simply to pay homage to Russell, a founding member of the Knifemakers’ Guild, member of the BLADE Magazine Cutlery Hall Of Fame© and, along with Mrs. Goldie Russell, operator of the sprawling A.G. Russell Knives retail knife store a short drive from the John Q. Hammons Convention Center.

 

According to www.knifeevent.com, custom knifemakers who plan to exhibit at the show include, in alphabetical order, such well-known names as Canada’s Gaetan Beauchamp, Arno Bernard, Tim Britton, ABS master smith Jim Crowell, W.C. Davis, Bob Dozier Knives, Cutlery Hall-Of-Famer D’ Holder, Larry “The Hammer” Harley of National Geographic TV’s Lords of War, Bill Mace Imel, Germany’s Dietmar Kressler, W.D. Pease, Johnny Stout, ABS master smith Brion Tomberlin and many more. Committed factory knife companies include, again in alphabetical order, Al Mar Knives, Benchmade, Boker USA, Buck, CRKT, KA-BAR, Kershaw, Leatherman, Ontario, Queen, SOG Specialty Knives & Tools, Spyderco and others.

 

Show hours include early VIP admission Friday from 12 p.m. to 2 p.m., with general admission from 2-6 p.m. Saturday hours are 9 a.m. to 6 p.m. and Sunday 9 a.m. to 3 p.m.

 

Buy a three-day VIP pass for a chance to win a free one-night stay during the show (July 27 or 28) at the Embassy Suites, and a Saturday lunch with A.G. and Goldie Russell.

 

For more information visit www.knifeevent.com or call 800-255-9034.

 

For the latest knife news, stay tuned to www.blademag.com (www.blademag.com

Join Larry "The Hammer" Harley and A.G. Russell Knives' Debbie Myers at the A.G. Russell Knife Event 2013.
Larry “The Hammer” Harley—here with A.G. Russell Knives’ Debbie Myers during the 2013 BLADE Show (www.bladeshow.com) Awards Banquet—will be among the exhibitors at the A.G. Russell Knife Event 2013.

).

 

Cutting Critique: HTM Lightfoot Bullwhip

Greg Lightfoot's Bullwhip design in a tanto blade by HMT is exclusive to ShopBlade.
The HTM Lightfoot Bullwhip in the tanto blade is a ShopBlade exclusive and gets the once over in our “Cutting Critique.”

The HTM Lightfoot Bullwhip Tanto is one of those deceptive heavy-duty tactical folders that feels big to the touch but, at 6.5 ounces, is surprisingly lightweight—and is our latest entry in our “Cutting Critique” series.

Designed by award-winning knifemaker, motorcycle racing enthusiast, kayak builder and all-around man of many talents, Greg Lightfoot of Alberta, Canada, the HTM tanto version of the knife is exclusive to ShopBlade (www.shopblade.com). The 3.5-inch hollow-ground blade with a hint of a recurve is coated black and the factory edge is razor sharp for any number of cutting jobs straight out of the box. The tip is also razor sharp and thickened on the spine end, ideal for penetration, a hallmark of any classic tanto blade design.

The robust, hump-backed handle is 5/8-inch thick and features Lightfoot’s “shark-skin” texture on the non-clip side for enhanced purchase. A slight finger groove in the bolster, reverse bird’s-beak butt and flipper guard keep your hand squarely in control of the knife.

The Maxx Glide Pivot Bearing System, designed by Darrel Ralph, operates effortlessly by way of the flipper opener. The tension on the locking liner spring is nice and tight—though not too tight—to keep the blade securely open during use.

The only thing I do not like is the sharp end of the flipper. While it provides excellent traction for opening the knife, the sharp end can jab you at inopportune times—not enough to seriously injure you but enough to be uncomfortable. However, it’s nothing that can’t be remedied with a few swipes of your favorite abrasive.

A cool black zippered pouch with the HTM (Hand-Tech-Made) logo completes the package. ShopBlade’s price: $299.99.

Click here to get the HTM Lightfoot Bullwhip Tanto.

How to Sharpen a Knife

It doesn’t matter if you’re a hunter, outdoorsman, knife enthusiast, collector or even an experienced survivalist or do-it-yourselfer, learning the basics of knife sharpening often takes a backseat to more pressing matters. It’s a question on everyone’s mind—What’s the fastest, easiest way for me to sharpen a knife, and what’s the best sharpener on the market? Unfortunately, there’s no one right answer, but through researched and developed, step-by-step articles on knife sharpening, we’ve made it easy for anyone to learn the basics, and even some of the more involved methods of honing blades.V8724

The “Sharpen A Knife & Care For A Collection” digital download is an easy-to-navigate, read and enjoy eBook.  This digital guide is a PDF file you download and access with any home computer, lap top or digital device with the Adobe Reader program installed. In this guide you’ll find 11 chapters covering various facets of knife care and sharpening, written by noted knife industry experts, including Dexter Ewing, Durwood Hollis and James Morgan Ayres.

Here’s an excerpt:

It’s one of the oldest methods of honing a blade bevel, the most traditional, conjuring up images of ancestors, grandparents, even Japanese bladesmiths working edges on whetstones or oilstones, fingers blackened from the grit. Stone remains a popular sharpening medium. It might not be the Stone Age, but you would hardly know it by perusing the rock-hard offerings of knife or knife sharpener and accessory companies.Sharpener01

Unlike traditional stones bought for pennies apiece at the old hardware store, the Smith’s 2-Stone Sharpening Kit (www.smithsproducts.com) comes with a 5-inch, medium-grit stone, a 4-inch fine Arkansas stone, honing solution and a sharpening guide. The medium-grit stone, meant for quickly setting an edge, comes mounted on a molded-plastic base that features a built-in storage area at the bottom for holding the fine Arkansas stone, the latter of which is ideal for finishing or polishing an edge. The manufacturer’s suggested retail price (MSRP): $15.99.

“It is everything you need to put a razor-sharp edge on your large or small knives and tools,” Richard Smith says. “The neat thing about this kit is that, although you get two stones, they only take up the space of one bench-mounted stone. I never lose the fine stone because it’s always stored in the base, and it allows me to take the fine stone into the field with me if needed.”DMT-W6EFC

Click here for more, and enjoy!

 

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement