Knife Collecting

Knife collecting is an extremely rewarding experience for knife enthusiasts. There truly is a knife for everyone. Many increase or hold their value throughout the years, making collecting knives something to pass on to the next generation of knife collectors.

Tips for Traveling With Knives

An informative article written by Mike Haskew on how traveling with knives presents challenges is posted on the American Knife & Tool Institute (AKTI) website.

It’s perfect timing considering the thousands of knife manufacturers, purveyors, collectors, dealers, enthusiasts and media professionals traveling to the BLADE Show May 31-June 2, 2013 in Atlanta. Yet the article will remain relevant long after the BLADE Show and into the future. 674b1262ac2f843595177d7c527ebc39_Outdoorseminar3450px

“Travelers need to be aware of knife laws where they go to make sure they are legal, and, of course, know the policies of the airlines, TSA, or whatever mode of transportation they use” related Jan Billeb, Executive Director of AKTI.

“Some municipal laws may not allow certain knives, or some states may have restrictions on knives at airports.”

As Haskew puts it, “In the post 9-11 era, traveling with knives by air or ground requires a heightened awareness of applicable laws and methods for safe carry and transport to and from the destination. When an airline is involved, the Transportation Safety Administration (TSA) enforces strict rules. A knife owner traveling with his or her trusty two-blade trapper is subject to scrutiny and possible confiscation, just as the knife dealer traveling to a show with multiple collectible pieces, or the chef heading home from a culinary event.”

Read the full article here. 

Educating the Future Of Knives

The American Knife & Tool Institute (AKTI) recently announced it will present a series of informative articles on its website, www.akti.org, that address various aspects of the knife owner’s experience. The first of the series will relate tips and advice on introducing young people to knives.

2-Customer-son

Among those giving insights in the new AKTI youth knife series will be A.G. Russell. Here a father demonstrates a knife for his son at A.G. Russell Knives retail store in Rogers, Arkansas. (A.G. Russell Knives photo)

“I was always taught that the age of reason was 7, which is also Cub Scout age when I got my first knife,” commented Dan Piergallini, president of the Gator Cutlery Club. “Safety was always stressed, and supervised use of a knife is a must. Also, one must insist that the knife never be taken to school no matter how much you want to show it off.”

Billeb-Jan-2012Along with Piergallini, AKTI Executive Director Jan Billeb, Becky Reid of Shepherd Hills Cutlery, and Blade Magazine Cutlery Hall-Of-Fame© member A.G. Russell will provide insights on their experiences in promoting safety, awareness, respect and proper knife use among young people.

AKTI Executive Director Jan Billeb (left).

Look for the story on kids and knives and subsequent offerings from AKTI to provide timely and relevant perspective on topics of interest to the cutlery community.

“We are excited to bring these informative articles to AKTI members and knife enthusiasts everywhere through our website,” Billeb said. “Introducing knives to the next generation is a key element in promoting their safe use and increasing the understanding of knives as valuable tools that are important in our everyday lives.”

To read the article on kids and knives visit www.akti.org/education/kids-and-knives.

For more information, call 307-587-8296 or visit www.AKTI.org. Follow AKTI at http://www.Facebook.com/SaveOurKnives and http://twitter.com/SaveOurKnives.

10 Tips for Proper Knife Show Etiquette

Ask Permission

Always ask an exhibitor’s permission before picking up a knife from his table. Nothing’s worse than some ya-hoo barging up, grabbing a knife and launching into a spiel on how much he knows about knives. Treat the exhibitor like you would any decent human being and ask permission to pick up the knife first.

Considerations for Folders

If it’s a folding knife, after asking the exhibitor if you can pick it up, if it’s closed and you want to open it, ask if you can do so (though most every folder maker will expect you to open it, check the action, etc). And if it’s a multi-blade, NEVER open more than one blade at a time. It puts too much pressure on the backsprings and can cause undue wear and tear. If you’ve bought the knife, then open all the blades you want (though it will still cause undue wear on the backsprings). And if you open the blade(s), close it/them before handing the knife back to the maker.

Hand Someone a Knife Safely

how to give someone a knife

Mind Your Edges & Tips

Your blades are your responsibility! Mind those edges and tips. Nothing is ruder than gouging someone on your 6 because you’re strolling around with a sword under your armpit like some 18th-century field marshal.

Say It, Don’t Spray It

Be careful when you are examining an exhibitor’s knife not to spray spittle on the knife. Some people tend to “spray it instead of say it,” and spittle, if not wiped off, can cause “spit pits,” or tiny rust spots.

Wait Your Turn

Never interrupt an ongoing conversation at an exhibitor’s table. The exhibitor might be in the process of selling a knife and if you barge in and start blabbing away, it may chase the buying customer off. Besides that, it’s rude.

Make Way for Business

If you’re talking to an exhibitor and have no intention of buying a knife and see someone next to you who obviously is intent on buying a knife from the exhibitor, politely bow out and give way to the potential buyer.

Leave “I’ll Be Back” to Arnold

Before leaving his/her table, unless you are really going to do it, never tell the exhibitor, “I’ll be back.” Don’t be labeled an “I’ll Be Backer”! 😉

Haggling

Don’t haggle over price with custom knifemakers. They know how much time, effort and materials they put into a knife. If you don’t like the price, move on.

Getting in Close

Using a loupe to examine an antique knife is one thing but don’t use one to examine the custom maker’s knife at the maker’s table. It’s just not very good form. Now, if it’s a custom knife sold by a purveyor, that’s different. After all, if you have a question about the knife’s authenticity, it is possible that the purveyor made a mistake in buying the knife. We all err at times, right?

These are a few of the rules of knife show etiquette. There are others. Practice proper knife show etiquette and your entire show experience will benefit as a result.

Change The Types Of Knives You Collect?

Read this before deciding whether to change the types of knives you collect. (Written by Mike Haskew and excerpted from the March 2013 issue of BLADE®).

You may face a crossroads, a time of decision involving the realization that interests, tastes and possibly buying power change. In such situations, you may decide to begin collecting a different genre of knives, departing from what you have collected. If and when that time comes, evaluating your situation and making informed decisions is crucial.Hale_120608

Well-made vintage knives by legendary makers can be very attractive to collect. Lloyd Hale does the honors here in a chute knife sporting an ironwood handle with pearl and abalone inlay. (SharpByCoop.com photo)

Some basic questions loom large, from deciding what to collect to getting the best education on what is available, selling or retaining an existing collection, and, if the choice is to sell, then maximizing the revenue generated.

First, the decision to make a change deserves due consideration. “You should have a very good reason for it,” remarked Peter Gill, who has been collecting knives for 15 years, “no whims.”

While some are into knife collecting for profit, it is always prudent to collect what you like. After all, you may own it for a lifetime. 08BL0313

“I believe a collector who is going to start collecting another type of knife should buy and collect what he’s attracted to,” reasoned Ken Potolicchio, who bought his first handmade tactical folder, a large Tighe Pan by Brian Tighe, in the fall of 2001. “In other words, buy something you would like to own, handle or even use. Research the new type of knife to be collected and be comfortable with the effort and costs to start a new or additional collection.

“If you’re going to start collecting another type of knife, buy and collect what you’re attracted to,” reasoned Ken Potolicchio, who bought his first handmade tactical folder, a large Tighe Pan (above) by Brian Tighe, in the fall of 2001. “In other words, buy something you would like to own, handle or even use.” (Brian Tighe photo) 

“Ask yourself why you want to collect the new type of knife,” Ken continued. “Is it simply to make money, to carry and use the new knives, or is it in the pursuit of desirable knives of a new type? What if you change your mind? You need to be very sure, especially if the sale of your current collection is a factor.

“As to resources, I would recommend reading the magazines and contacting purveyors you may have dealt with, trust and have a relationship with, or that deal in the type of knives you’re planning to collect. Direct contact with the makers of the knives to be collected is a good idea. I’ve found that most are willing to talk about all aspects of their knives.”

Though you may be financially capable of retaining your current collection, you may have to liquidate your existing holdings to be able to afford to collect something new. Opinions vary on the best way to sell, and some experts tend to think that holding on to what you have already collected is the best of all options.ed's dad's wwII Ek

“Don’t buy knives that are damaged or of poor condition unless they are very old and rare, such as [antique] bowies, Civil-War-era knives, and rare military knives,” Marvin Clyncke commented. Ed Fowler’s dad carried this World War II-era Ek Model 3 during World War II. (Fowler photo)  

“If you decide to shift gears and like another kind of knife, you might consider the following,” advised Pete Cohan, a serious collector since the early 1960s. “Trade the knives you have for those you now wish you had, but be sure you know who you are trading with and be firm when it comes down to the final details. You could try to sell your old collection to somebody you know, but don’t let anyone talk you out of a few pieces. You may be left with the rest and can’t hardly give them away.”

If you are an informed collector, you have a solid sense of what your collection is worth and what you will take for it. Unless such a solid base is in place, the hazards of selling or trading are substantial. Tactics also will vary depending on your motivation—simply to recover your initial investment or to make as much profit as possible to plow into the acquisition of your newfound favorite knives.

Though selling your knives as a collection may move the transition process forward more rapidly than selling in ones or twos, there is a trade-off. Marvin Clyncke’s father worked for Western Cutlery in the late 1930s, and Marvin has been a collector for more than half a century.

“If you want to sell your existing collection, you should sell on eBay, as you reach the whole world there,” he recommended. “Selling as a collection is not a good idea unless you have a specific buyer who is willing to pay a good price. Selling as a collection, you are essentially eliminating a lot of folks who may have some of the same knives and don’t want to buy a whole collection just to get a few that they need. Also, the price of the whole collection could eliminate many buyers, especially if the collection is large. Selling individually definitely would realize top dollar for each piece.”

Cardinal Rules

• Collect what you like or even use;

• Chasing trends is a fool’s errand;

• Collecting knives that are hot now means paying top dollar now as well;

• Know which knives are collectible in specific geographic locations of the country;

• Inexpensive, low-end knives will never appreciate to any degree;

• Well-made, fine-condition knives should not lose you any money;

• Don’t buy damaged/poor condition knives unless they are very old and collectible, such as antique bowies and rare military knives.

A FOOL’S ERRAND

In the continuing debate of present vs. future value, collectors heading down a new road are regularly challenged with a values proposition. Collecting what is hot today by no means ensures an appreciation in price down the road, while collecting something that is under the radar now provides no assurances on an increase either.

“A collector should only collect what pleases him or her,” reiterated Gill. “Chasing trends is a fool’s errand.”

Cohan advised, “What is hot now and what will be hot in the future is the classic question asked by every stock market trader. The question and its answer in the case of pocketknives or knives in general is further complicated by such things as the geographic location of the collector. What is hot on the West Coast and what is hot in the South are often very different. This can provide opportunity as well as risk for the collector who is starting in another direction. It is still, in my opinion, better to collect knives that you like for whatever reason. The collectibility of knives and their ‘rarity’ at some future date remains an elusive projection.”IMG_1207 Pic 19

Potolicchio leans toward the long view and collecting for the future rather than some notion of today’s “hot” commodity. He provides an illustration of future value with a firearm that he bought some years ago. “I gave my son a Ruger 10/22 rifle that currently [fetches] about $275, and I have the original receipt for the rifle when I bought it new for $38.50,” he laughed.

What’s hot in the West and South are often very different, Pete Cohan observed. This can provide opportunity as well as risk if you’re starting over. For instance, at the G4 Show in Las Vegas, tactical folders such as those by Jeremy Marsh (including the one at top just above photographed by Mike Searson) turned heads. In the South, antique pocketknives such as those by New York Knife Co. (immediately above) remain collectible. 

According to Clyncke, collecting knives that are hot now means paying top dollar now as well. Whether such knives will even hold their value or simply become yesterday’s fad is anybody’s guess. He does, however, see the thrill and allure of collecting something reasonably priced today that may in fact appreciate in the days to come.

“It is a guessing game,” Marvin warns, “but quality is everything. Cheap-made, low-end knives will never appreciate to any degree. Well-made, fine-condition knives will surely not lose you any money. Again, research is a big help.”

Sources To Use

• Read knife publications and websites you trust;

• Contact purveyors with whom you have dealt, trust and deal in the types of knives in question;

• Have direct contact with the makers of the knives in question;

• Let as many people as possible know what new collectible you want;

• Ask your friends to be on the lookout for examples.

Knives2013

One of the best ways to research what is best to collect is to read publications you trust, such as the new KNIVES 2013

Experienced collectors may already have a feel for the do’s and don’ts of collecting a new style of knife. However, it pays to remember lessons learned and to benefit from the experiences of others.

“Don’t buy knives that are damaged or of poor condition unless they are very old and rare, such as [antique] bowies, Civil-War-era knives, and rare military knives,” Clyncke commented. “Junkers are a dime a dozen and will sell for a dime a dozen in 10 years. I would let as many folks know as possible what you’re looking for. Never tell them what you will pay, just what type of knives you want. If you tell them what you will pay and they’re surprised at the price, they may just keep the knives as an investment. Some good ones may pop up right away. It never hurts to have friends looking for you.”

Potolicchio added that research is a key element before the final decision to switch the type of knife being collected. Without investing enough time to understand the market for the new type of knife, you may never find your comfort zone, particularly if you have liquidated your existing collection in the process.

For Cohan, the collecting transition should be something of a soul-searching process. He advises considering several aspects of embarking on a new frontier in collecting.

“How available are the knives that you now fancy, and are they of recent vintage?” he asks. “Are they still in production or are they a ‘short run,’ which may or may not permit a wide distribution of the knives, directly affecting their collectibility? If the knives are antique, where will they be found and can they be found without undue cost? What are the prices typically asked for these knives in collectible condition? Are you going to collect only the mint or near mint/excellent examples, and can you afford to pay premium prices for this type of knife?”

Questions YOU NEED ANSWERED

• Do you have a very good reason for starting over?

• Are you comfortable with the effort and costs it will take to build a new collection?

• Do you want to make money or collect, carry or use the knives?

• What knives should you collect, and how do you best research them?

• How available are they and are they of recent vintage?

• Are they still in production or limited in distribution, both of which influence collectibility?

• If antiques, where can they be found and can they be found without undue cost?

• What are the prices typically asked for the knives in collectible condition?

• Are you going to collect only mint or near-mint examples, and can you afford to pay premium prices for them?

HAVE/EXECUTE A PLAN

Early in the collecting transition process, there may actually be more questions than answers. Nonetheless, if you plan appropriately and execute the plan, you continue to find your passion for knives rewarding, whatever type you seek.

KEEPING Your Knife Sharp

KEEPING your knife sharp entails more than knowing how to sharpen it. If you maintain the knife’s edge on a regular basis, it will eliminate having to re-establish the edge each time the knife goes dull.

Maintaining the edge is easy. The hard part is getting in the habit of doing it. However, once you get tired of re-establishing the edge every time your knife goes dull, you will appreciate how important the habit is.

Fine tune your edge with a GATCO TRI-SEPS.
Edge touch-ups are a breeze on the GATCO TRI-SEPS.

First, get one of the easy to use pull-through or similarly easy to use sharpeners and store it by wherever you put your knife at the end of the day. When you go to put your knife up, simply grab the sharpener and pull the blade edge through it five or six times. This should be enough to fine tune the edge and get it back to a working sharpness for the following day.

Such sharpeners as the GATCO TRI-SEPS are ideal for the job because they are easy to use and store or even carry. The TRI-SEPS, for instance, includes a chain for keyring carry. It sharpens both plain and serrated edges.

For more information on the GATCO TRI-SEPS—ideal for end-of-day edge touch-ups—click here.

Guilford Art Center Holds Juried Knife Exhibit

Calling all bladesmiths and knifemakers: the Guilford Art Center in Guildford, Connecticut, announces “Contemporary Knife Smithing: A Juried and Invitational Exhibition,” and is calling for submissions.

Bladesmithing is a thousands-year-old craft practiced in diverse cultures across the world. It has survived as an art form despite modern industrialization, with artisans dedicated to preserving and expanding traditional techniques. This exhibit will explore and highlight the artistry of the contemporary hand-crafted knife, as an object with both functional and aesthetic value.

Exhibit Dates: July 10-August 18, 2013 

Juror: An ABS journeyman smith, Mace Vitale practices blacksmithing and is a copper smith. He has a background in architectural pre-cast concrete, is owner of Laurel Rock Forge in Guilford, and is an instructor at the Guilford Art Center.Vitale_120608

Eligibility: This exhibition is open to knives made by U.S. residents.

Entries: Each artist may submit up to three (3) works. Each work may be represented by two separate images: one full view and one detail view. Work must be submitted in high-resolution digital format. For each entry please note dimensions of knife, and a maker’s list price (retail price), or not-for-sale/insurance value. Email entries to: [email protected].

Entry Fee for Applicants: $20. Includes up to three (3) submissions. Make check payable to Guilford Art Center and mail to 411 Church St., Guilford, CT 06437. Or call the Center with credit card number 203-453-5947. Payment must be received for entries to be eligible.

Entry Deadline: June 10, 2013. Digital images and entry fee must be received by this date.

Conditions:  All accepted works must arrive with a display case that closes for safety purposes during exhibition. All entries must be original and must be completed within the last 3 years. The Center reserves the right to reject entries that do not meet these requirements or is deemed unstable. Shipped work that differs from submitted images will not be accepted. Work damaged in shipping will regretfully not be presented. All accepted work must have proper identification. No accepted work may be picked up before the closing of the exhibition.  Work may be available for sale or must be identified as NFS. The retail price or insurance value provided on the entry form will be used; no changes may be made after the work is shipped.

Shipping: Shipping costs are the responsibility of the artist. A check for return shipping, including the cost of insurance, must accompany delivered work, payable to Guilford Art Center. Work damaged in shipping will not be presented. Detailed packing/handling instructions must accompany all works.

Hand Delivery: Please call the Center to make an appointment for hand delivery/pickup at 203-453-5947, Ext. 12, or email [email protected].

Receiving Deadline: All work must be received no later than these dates.

Sales/Insurance: A 40% commission on all sales will be retained by the Center. Artists must indicate sale price and insurance value or, if NFS, just insurance value. Submission of work to this exhibit is done so at the artist’s risk and implies an agreement on the part of the artist to all the conditions of this Call for Submission. GAC will not be responsible for loss or damage to work in transit, however, work will be insured while in the Guilford Art Center facility.

Publicity: Guilford Art Center reserves the right to photograph entries for the purposes of documentation, education and publicity. Accepted artists are encouraged to send to the Center a resume, artist statement, brochures, and additional photographic materials of the accepted work for publicity purposes.

 

Show Schedule:

Application due: June 10, 2013    

Artist Notification: June 14, 2013   

Receiving: June 24-28, 2013  (10am-4pm)  (Shipped/by appointment) 

Opening reception: July 10, 2013 (5-7pm) 

Closing:  August 18, 2013   

 Deinstallation: August 19-23, 2013 (10am-4pm) (Shipped/by appointment) 

For more information please contact Guilford Art Center at 203-453-5947, or visit www.guilfordartcenter.org.

Use A Hunting Knife Designed by Russ Kommer

A hunting knife is great—and when you use a hunting knife designed by an Alaskan hunting guide who also happens to be a knifemaker, that’s even better.

The Alaskan Skinner designed by Russ Kommer for Timberline.
A hot hunting knife is just what the doctor ordered—the Alaskan Skinner designed by Russ Kommer for Timberline.

The Alaskan Skinner from Timberline is a hunting knife designed by knifemaker Russ Kommer, who also is a long-time Alaskan hunting guide. Kommer spent most of his youth in the Minnesota north woods hunting, trapping and fishing. Idaho is where he got his start as a big-game guide in the Selway-Bitterroot Mountains. He took his passion for hunting to Alaska in 1984—which is where he also discovered his love of knives, particularly the hunting knife design, after dressing big game. He learned to design the most functional and comfortable hunting knife he could and started making versions of them in 1997.

Kommer’s custom knives include the hunting knife/skinner, camp knives, folders, “unique” fillet knives, fighters, boot knives, bowies, hatchets and tactical knives. In addition to Timberline, Kommer also has designed knives for CRKT, including the Signature line of hunting knife, and the Escalade and Extreme Mountain hunting knife models for Browning

The Alaskan Skinner features what is called an upswept blade with a hollow grind—great for high-performance field dressing, skinning and other chores associated with big game. Besides that, it will also help you prepare your meals in camp and do the other cutting chores that need doing outdoors.

The blade steel is a 440 stainless that fights corrosion and is relatively easy to sharpen compared to steels such as CPM S30V and others. The handle is a soft Zytel rubber with a palm swell to fill your hand, and finger grooves and a bird’s beak pommel to lock your hand in for any number of cutting tasks, from light slicing to heavy-duty cutting. Overall length: 9.625 inches. A black ballistic nylon sheath with belt loop is both handsome, durable and secure. Weight (including the sheath): 13.5 ounces.

Click here for more about this Russ Kommer hunting knife.

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement