Home Fixed Blade Knives Page 9

Fixed Blade Knives

Random

Taking The Foot Path: Top Sheepsfoot Knives

Reuben Bolieu
-
0
Taking The Foot Path: Top Sheepsfoot Knives

Three unique sheepsfoot blades for top pocket performance.

A sheepsfoot blade hides its edge behind a quiet profile. It slices clean and never wanders. These three nowhere-near-a-kind blades remind you why the shape keeps earning loyal fans.

Sheepsfoot Advantage

A sheepsfoot blade shape delivers straight, predictable cuts without risk of a piercing tip. The sheepsfoot blade gets its name from its shape, which resembles a sheep’s hoof. The edge runs flat so the user can push through rope, cardboard and fabric with complete control. The dropped, rounded nose keeps the point out of the work, which helps during rescue tasks and close-quarters cutting. The shape shines in utility roles, but it trades away penetration and fine-tip detail work. Users who need a safe, steady cutter reach for a sheepsfoot. Users who need a sharp, probing point usually look elsewhere.

Reiff Knives Circadia

Taking it into the woods, the author found the Reiff Knives Circadian Sheepsfoot performed like a larger knife due to the full-sized handle and wide blade. The perfect tool for both the camp and kitchen.
Taking it into the woods, the author found the Reiff Knives Circadian Sheepsfoot performed like a larger knife due to the full-sized handle and wide blade. The perfect tool for both the camp and kitchen.

Reiff Knives built its reputation on hard-use tools designed for people who work and live outdoors. The Circadian Sheepsfoot fits that mission cleanly. Reiff Knives is a family run and veteran-owned company, and it’s carved out a niche by blending modern steels with field-driven ergonomics. Its knives aren’t showpieces—they’re workhorses built to survive real use in the backcountry, the shop or the boat. The Circadian line has been one of the company’s best sellers, and the sheepsfoot variant pushes the platform into pure utility.

The Circadian Sheepsfoot features a compact EDC profile, measuring roughly 7 inches in overall length, depending on the sheath and scale configuration. The blade measures about 3 inches and is cut from CPM MagnaCut, a steel chosen for its balance of toughness, edge retention and corrosion resistance—a smart match for a knife meant to live outdoors. Reiff offers the blade in stonewash or black DLC, both finishes built for durability and low glare. The 90-degree spine is sharp enough to spark from a ferro rod, adding value for fieldcraft.

Handle scales are available in canvas Micarta, colored black or green depending on the model. The geometry favors control: a deep index cut, a neutral mid-section and a palm swell that locks the hand without forcing a grip. It’s a compact knife that still feels anchored during push cuts, rope work and fine carving.

Reiff pairs the Circadian Sheepsfoot with a Kydex sheath, sold in multiple colors and patterns, including black, OD green and multicam. Reiff designed the sheath for belt or pack-strap carry with enough retention for active movement. It’s an EDC fixed blade—small enough for daily tasks and tough enough for field abuse.

Circadian Sheepsfoot Specs
Overall Length: 7.25”
Blade Length: 3.28”
Blade Thickness: 0.120
Steel: CPM-MagnaCut Stainless
Finish: Stonewash
Weight: 4.10 oz.
Scales: OD Green Canvas Micarta
Sheath: Ambidextrous Universal Kydex with Tek-Lok
Made in the U.S.A.
MSRP: $285

Circadian Performance

Sheepsfoot blades excel in the kitchen, similar to a santoku knife with a flat blade. The Circadian slices with authority, performing pull slices with the tip.
Sheepsfoot blades excel in the kitchen, similar to a santoku knife with a flat blade. The Circadian slices with authority, performing pull slices with the tip.

Even though these three knives are in the EDC realm, the Circadian Sheepsfoot feels like the big brother. I have to give comfort and solidness to it. The knife has the heft to baton wood for the dry parts, and the edge geometry to feather wood like an ordained bushcraft knife. On top of that, the 90-degree spine showered sparks on every part, even the jimping.

It acts like a mini santoku knife in the woods, cabin and home kitchen. It performs draw cuts like a champ on food, cardboard, cordage, paper and leather. I made it my woods sheepsfoot blade and relied on it solo and teamed up with a chopper/splitter in the winter months. I touched up the MagnaCut blade once while testing it, and it wasn’t a chore, because I never let it get dull enough to need the sharpening stone.

I added an UltiClip to the sheath, carried it in my utility pocket and called it good!
The Circadian Sheepsfoot delivers reliable cutting performance for those who need a dependable tool that never falters. It’s simple, rugged and purpose-driven—exactly what Reiff Knives promises with every tool they ship!

Bear & Son Culery Large Sheepfoot Barlow

Bear & Son blends tradition with Alabama craftsmanship in the Large Sheepfoot Barlow, featuring simple mechanics and quality materials. Even living up to modern performance expectations, the author found the stag handle gave it “old-timey” appeal.
Bear & Son blends tradition with Alabama craftsmanship in the Large Sheepfoot Barlow, featuring simple mechanics and quality materials. Even living up to modern performance expectations, the author found the stag handle gave it “old-timey” appeal.

Bear & Son Cutlery operates out of Jacksonville, Alabama, where it machines, grinds, assembles and sharpens every knife under one roof. That full-control approach gives its traditional patterns a level of consistency collectors and working users both appreciate. The Large Sheepfoot Barlow sits squarely in that tradition. It blends a classic American pattern with modern steel choices and multiple handle options, giving the user a pocket tool that feels familiar but performs with modern reliability.

The knife measures 7 inches in overall length and 4 inches closed. Bear & Son fits the frame with a 2.75-inch sheepsfoot blade cut from stainless steel. The second blade mirrors a traditional Barlow layout, providing a backup edge for finer work. The sheepsfoot profile drives straight cuts through rope, cardboard and daily tasks with predictable control. The company shapes the spine with a clean, squared feel, which helps during controlled push cuts and scraping chores.

Handle options include rosewood, Genuine India Stag Bone and white smooth bone. Each material gives the knife a different personality: rosewood for warmth, stag for texture and smooth bone for a classic pocket-worn look. Nickel-silver bolsters anchor the Barlow silhouette and add durability at the pivot.

The knife is a slipjoint, so it stays legal in most jurisdictions and fits the traditional-carry crowd. Bear & Son ships it without a sheath, as expected for a pocket Barlow. The weight lands at 3.7 ounces, which keeps it planted in the pocket without feeling bulky.

2-Blade Barlow Sheepsfoot
Overall Length: 7”
Blade Length: 3”
Closed: 4”
Blade Thickness: 0.90″
Steel: Stainless
Finish: Satin
Weight: 2.9 oz.
Scales: Rosewood, Genuine India Stag Bone, White Smooth Bone
Sheath: None
Made in the U.S.A.
MSRP: $79

Large Sheepfoot Barlow Performance

The Sheepfoot Barlow's large blade cut through leather and nylon webbing easily. Meanwhile, the comfortable, tapered handle made pull slicing smooth.
The Sheepfoot Barlow’s large blade cut through leather and nylon webbing easily. Meanwhile, the comfortable, tapered handle made pull slicing smooth.

The Large Sheepfoot Barlow had some weight and an old-timey impression. It made me feel classy when I used it and it sliced like a champ. Its solid feel was substantial, though I took extra care when pulling the blades out. The liners inside the handles were sharp—near paper-cut sharp. But I didn’t draw blood when I opened it. They were just rough to the touch.

Both blades were wicked sharp. The smaller blade had a more awl-like shape and was thick enough to use as one. Or it could be your up-close, carving-in-tight-places blade. Pick your poison. The main blade excels at slicing rope, and the sharp tip makes short work of leather. What surprised me most was how detailed the sheepsfoot was mincing fresh garlic in the kitchen. Naturally, the stainless steel remained worry-free around moisture.

Bear & Son continues to push traditional patterns forward while keeping the work in Alabama. The Large Sheepfoot Barlow reflects that mission: simple mechanics, honest materials and a pattern that earned its place over generations.

Tactile Knife Co. Redhawk

Kept to the company’s tight tolerances, the Tactile Knife Co. Redhawk is a versatile cutter designed for everyday use—indoors or outdoors. The author found the knife’s design and build quality impeccable.
Kept to the company’s tight tolerances, the Tactile Knife Co. Redhawk is a versatile cutter designed for everyday use—indoors or outdoors. The author found the knife’s design and build quality impeccable.

The Redhawk marks Tactile Knife Co.’s push into the compact fixed-blade EDC space, and it carries the same machining pedigree that put the Dallas-based shop on the map. Tactile started as a precision pen company before expanding into knives, but its through-line never changed: tight tolerances, clean lines and American-made materials. Its shop in Texas machines nearly every component in-house, and the company leans hard into heirloom-grade build quality. The Redhawk reflects that ethos—simple, durable and purpose-driven.

Taylor Martin created the Redhawk after years of carrying fixed blades that fell short. It’s a compact knife punching above its size without feeling delicate. It measures just under 7 inches in overall length (6.9 inches OAL) with a 2.75- or 3-inch blade, depending on the variant. The blade, cut from CPM MagnaCut, is a steel chosen for its balance of toughness, edge retention and corrosion resistance. Its reverse tanto/modified sheepsfoot profile gives it a tall cutting surface and a fine, workable tip. Blade stock runs 0.12-inch, keeping it slicey without feeling thin.

Handle scales are made of Micarta and come in multiple colors. Tactile shaped them with a scalloped pinch-grip area for control during fine work and heavy cuts using a chest-lever grip. Finish options include stonewashed, tumbled Cerakote and black Cerakote, depending on the retailer. The spine is ground clean and crisp, suitable for scraping tinder or striking a ferro rod. Tactile doesn’t explicitly market it as a 90-degree spine, but it behaves like one in use.

The knife ships with either a Kydex or leather sheath, both set up for pocket carry with a clip, making it a true EDC fixed blade rather than a belt-only option.

Redhawk Specs
Designer: Taylor Martin
Overall Length: 6.9”
Blade Length: 2.75”
Blade Thickness: 0.120
Steel: CPM-MagnaCut Stainless
Finish: Cerakote (black)
Weight: 3.16 oz.
Scales: 3D Contoured Micarta Handles (black)
Sheath: Kydex Discreet Carry Concepts Sheath Clip
Made in the U.S.A.
MSRP: $249

Redhawk Performance

The Redhawk was a woods camp breakfast companion during the author’s testing. The sheepsfoot both helped with fire, food prep and eating.
The Redhawk was a woods camp breakfast companion during the author’s testing. The sheepsfoot both helped with fire, food prep and eating.

I first saw the Redhawk in Taylor Martin’s hand at an outdoor event. We talked about it later that evening, and I was eager to get one and put it through the wringer. First stop—the Irish pub to show the guys. After show-and-tell, it was nearing the holiday season and the Redhawk went to work on package duty. Work included heavy plastic strapping, paper and plastic packaging, bubble wrapping and—as little as possible—tape. I hate sticky blades, so usually I cut through cardboard when breaking them down flat. Believe it or not, paper, grass and cardboard are all hard on an edge.

In the woods, the Redhawk made feather sticks for a fire from wet wood and went on to slice ham and sausages. It kept a small bio stove well fed in the colder end of autumn. The blade performed as expected—well! The handle was nimble, yet substantially comfortable. The scalloped grooves in the Micarta scales did their job, especially in chest-lever and pinch grips.

The Redhawk is a compact cutter built for daily tasks, but it carries the machining DNA of a much larger knife. It’s a minimalist tool with maximum intent—exactly what Tactile Knife Co. set out to build.

Closing

The sheepsfoot blade shape shares genetic material with many knives, such as the Malaysian parang, the Japanese santoku knife, rescue knives and Serbian-style cleavers. There’s no escaping this timeless pattern!

Knife Reviews:

Boker And Condor’s Back To Basics Bushcraft Knives

Abe Elias
-
0
Boker And Condor’s Back To Basics Bushcraft Knives

We put the Boker Plus Vigtig vs. Wild and Condor Tool & Knife head to head to see which come out on top in the backwoods.

A couple of decades ago, attention started turning to the category of bushcraft knives. As usual, custom knifemakers were the ones filling the demand and leading the way. I was proud to be among them, along with such makers as Scott Gossman and others. There were those* before us but the push back then seemed more on survival knives with a tactical leaning.

After the push started, many smelled the opportunity to make money and the genre was flooded with assorted marketing schemes and people seeking their 15 minutes of fame. In all the confusion of people wanting to become famous and cash in, the true meaning of bushcraft was lost.

Boker Vigtig vs. Condor Wild
The thinner steel thickness on the Condor Tool & Knife Lipotes enables it to make finer curlicues than the Boker Vigtig vs. Wild. Designed by Dave Wenger and made in Germany, the Boker has an MSRP of $194.95. Joe Flowers designed the Lipotes, which is made in El Salvador. MSRP: $64.98.

A bushcraft knife is not something meant to be indestructible at all costs. It instead has always been a tool of creation. Now I see most marketing or testing related to whether the knife can be pounded through a log, a log that most likely would be unavailable if not for a chainsaw. No, the bushcraft knife started out as a tool, nimble in hand, keen in cutting and used to fabricate things in the bush, things not just to accommodate survival but to help a person thrive. In that reasonable light and practical expectation of the genre, let’s see how the Boker Plus Vigtig vs. Wild and Condor Tool & Knife Lipotes are suited to help you thrive in nature.

Boker Plus Vigtig

Boker sports a molded Kydex sheath
The Boker sports a molded Kydex sheath with an ambidextrous belt clip. The sheath holds the knife secure while still allowing for an easy draw when using a thumb push off.

The Boker’s 3.35-inch blade features a Scandinavian, aka Scandi, grind, a grind in which the major bevel is the only bevel and goes straight to zero. Executed correctly, the grind should take up at least a third of the blade’s width. If the grind is any shallower it will be too steep. Some variation on the height of the grind is due to the thickness of material. Being too steep will decrease the effectiveness of the blade to cut because the angle of the edge will plow into the work material—and when I cut with the Boker, it did just that. It is not that it won’t cut with a steep angle, it just tries to take heavier cuts as it dives. Therefore, you don’t get the thin controlled cuts as easy as a properly executed grind.

Scandi grinds are popular in bushcraft because of their amazing effectiveness carving wood. In the game area they work fine but you will often find that bone wreaks havoc on a Scandi edge. In addition, the cross profile of the blade is not optimized for processing meat. Full flat grinds process soft, malleable materials such as meat best since there is no shoulder on the blade to bind as the meat flows along the cross-section profile. On flat grinds you also have a secondary bevel, or micro bevel as some call it, and it takes hitting bone better.
The Boker is a full-tang knife with a blade .16 inch thick at the thickest, somewhat thick for a bushcraft knife. A clever feature is how the spine is finished. To strike a ferro rod off the blade spine you need a crisp edge. Sharp spines are more effective at generating sparks but are not very comfortable if you need to use a pinch grip or a thumb extension on a power grip. To address the issue, the Boker has a sharp spine toward the tip and a crisp spine section near the handle.

Blade thickness comparision
Note how much thicker (.16 inch at the thickest) the Boker blade is than that of the Lipotes (.13 inch at the thickest).

The handle is green linen Micarta® with beefy mechanical fasteners that double as lanyard holes. For those who prefer a full grip it has good profile contouring and leaves a blocky handle from side to side. There are no hot spots while still providing control.
The blade is CPM MagnaCut stainless steel and is wide for its size. With its thicker blade it batons well through small branches to make small kindling. You trade some agility for durability with a beefier blade material.

The molded Kydex sheath rides high and boasts a metal belt clip that screws on for right- or left-hand carry. The knife locks securely into the sheath yet not so much you can’t easily withdraw it.

I think the Boker has its good points. I do prefer my bushcraft knife to be more of a nimble cutting tool. Overall, if the edge were ground higher this knife would up its game substantially.

Wild and Condor Tool & Knife Lipotes

Lipotes batoning
For ease of baton work, the general rule is the cutting medium should be no wider than one-third the length of the blade. The Lipotes has a 4.15-inch blade of 14C28N stainless steel.

Let’s start with the handle on the Lipotes (among others, a lipotes is an endangered species of dolphin). It is an extended hidden tang and not a full tang—that’s right, not a full tang. Some time ago a well-known knife company introduced an extended-hidden-tang version of a knife and called it a full tang, and all the marketers and social media influencers decided to rename a feature so everyone could fall in line. If you can’t see the tang all around the knife’s handle, it isn’t a full tang.

Along with rat-tail tangs, hidden tangs have the distinct advantage of being some of the most comfortable knives in use. The steel element is totally encapsulated in the handle, allowing the maker to have full control in contouring the scales. In other words, you basically have a tang that will not interrupt how the material is shaped.

The Lipotes handle is very comfortable and the texture in the molded material provides a secure grip. As for the hidden tang extension, it can be used as a small hammering device or even a scraper.

Except for the grind, I like the overall proportions of the knife. As with the Boker, the grind doesn’t go high enough. It will still cut but the cutting would be greatly optimized if the grind were half its height taller. It performed well in its cutting tasks with power cuts, feathering and the like. However, it still missed the ease of cut and control of a higher grind. If I could, I would love to get my hands on a bunch of these blades and regrind them.

Lipotes sheath
The Lipotes has a quality sheath that holds the knife nice and tight when you ramble through the woods. The leather belt loop riveted to the back won’t accommodate a wide belt.

I really like the sheath. It has a nice, deep carry. It is a molded plastic with a good friction fit. It is a bit mysterious to me as to why the belt loop is so small. Only a dress belt would fit through it. You could still run a cord through it for neck carry or a baldric. The Joe Flowers design checks off so many of the boxes for a good tool. I would have been singing its praises more with a higher grind. Instead, I am pretty much humming.

More Than Survival

To repeat, a bushcraft knife isn’t just for survival, it is a tool of creation. Often the real goal of an issue gets lost in the minutiae that results from personal gain and egos. Over the years, marketing and self-promotion have polluted bushcraft until we have lost it in a sea of books and an ocean of social media. A look at a simple tool such as a knife can really remind us of what bushcraft is about. It is about man’s will to do more than just survive. Man strives to prosper.

I will leave you with one of my favorite quotes about tools by Thomas Carlyle: “Man is a tool-using animal. Without tools he is nothing, with tools he is all.”

*Author’s note: The origins of the discussions of bushcraft can be attributed to such enthusiasts as Mors Kochanski, Larry Dean Olsen, Lofty Wiseman, Ray Mears and others.

Check Out More Outdoor Knives:

White River Exodus 3: Petite And Sweet Outdoor Maven

Msg Kim Breed (ret.)
-
0
White River Exodus 3: Petite And Sweet Outdoor Maven

White River Exodus 3 is a great little companion blade to add to your gear.

A small bushcrafter/EDC knife, the Exodus 3 by White River Knife & Tool can be very useful. Also known as the Adventurecraft, this lean cutter has a thin, super-sharp blade that does all the chores that a larger knife can’t do easily, from skinning small game to whittling firesticks to removing splinters. It’s a great little companion blade to add to your gear. Does it cut? Let’s see.

White River Knife & Tool Exodus 3 Specs

Company: White River Knife & Tool
Blade length: 3.15”
Blade material: A2 tool steel
Rockwell hardness: 60-61 HRC
Blade @the thickest: 0.130”
Blade finish: Stonewashed
Scales: G-10
Weight: 2 ozs.
Overall length: 7.2”
Sheath: Kydex®
Weight w/sheath: 3.5 ozs.
Knife to know: Leather belt loop and different handle materials available
MSRP: $140

Light Cutting Duty

The author used vertical cuts on the 8-ounce leather as fast as he could. The edge bit swift and deep with a nice crunching sound.
The author used vertical cuts on the 8-ounce leather as fast as he could. The edge bit swift and deep with a nice crunching sound.

Slicing regular lined notebook paper went very fast. The Adventurecraft cut smoothly and aggressively. As I warmed up to its thin shape, the cuts were faster. The flat-ground blade is easy to index in use.

Next up, it sliced single-walled cardboard very quickly with a slight curl to the cut pieces. The blade’s width and full flat grind pulled the curl as the blade went through. The aggressive edge was still making noise as it sliced.

Medium Cutting Duty

For skiving the 8-ounce leather, the blade rendered very thin flaps time and time again.
For skiving the 8-ounce leather, the blade rendered very thin flaps time and time again.

I used vertical cuts as fast as I could on 8-ounce scrap leather. The edge bit swift and deep with a nice crunching sound. I somehow managed to keep all the skin on my fingers in the process. The Adventurecraft is very aggressive cutting leather.

For skiving, the blade rendered extremely thin flaps of leather time and time again. As expected, I surrendered a few thin slices of skin on the leather. The Adventurecraft has a very sharp edge!

Heavy Cutting Duty

Since the handle is as narrow as the blade, the author had to adjust his grip a few times when whittling the firestick. The deeper he cut, the more it wanted to roll in his hand. So he made the curlicues thin and kept on whittling. As he noted, “It’s a handy whittler in any case.”
Since the handle is as narrow as the blade, the author had to adjust his grip a few times when whittling the firestick. The deeper he cut, the more it wanted to roll in his hand. So he made the curlicues thin and kept on whittling. As he noted, “It’s a handy whittler in any case.”

I grabbed a piece of pine from the kindling pile and started to whittle a firestick. I had to adjust my grip a few times as the handle is as narrow as the blade. The deeper I cut the more it wanted to roll in my hand. So I made the curlicues thin and kept on whittling. It’s a handy whittler in any case.

The edge withstood 30 whacks into a deer antler. The little blade took the beating with no chips or rolls, a sign of excellent heat treatment.
The edge withstood 30 whacks into a deer antler. The little blade took the beating with no chips or rolls, a sign of excellent heat treatment.

Half-inch sisal rope was next. The Adventurecraft put out 160 crunching cuts before some sliding ensued. The pressure I used on each cut made it challenging to hang on to the narrow handle. I really had to grip it tightly. It cut aggressively once I got going.

I checked the edge with 30 whacks into a deer antler. The little blade took the beating with no chips or rolls. Yep, excellent heat treatment! Back at the workbench, I grabbed the sheet of notebook paper for a second go-round. The Adventurecraft still sliced smoothly.

Final Cut

I would widen the handle for more leverage in cutting. This is a handy little blade to have around the campsite or in a backpack. It’s great for everyday uses.

Check Out More Outdoor Knives:

The M7 Bayonet: From Combat To The Campsite

Mike Ableson
-
1

The M7 Bayonet Has Been Used By The United States Military For Almost 60 Years. The Dynamic, Multi-Purpose Tool Is Just As Useful Now As When It First Went Into Service.

When you first think of a bayonet your mind probably goes to the battlefields of the Revolutionary and Civil Wars. But no, bayonets aren’t some relic from a bygone era. While the days of bayonet charges are long long, the knives are still in use by the military today and have evolved into a multi-faceted tool.

The M7 Bayonet stands out due to its longevity. Built on the back of the M4 bayonet, which was issued toward the tail end of World War 2, the M7 is designed to be used with the M16 or the M4 carbine, although it can fit on numerous other rifles. 

The History Of The M7 Bayonet

The M7 was first introduced in 1964 during the Vietnam War. The knife was initially made by Bauer Ord Company, but numerous companies did eventually manufacture the M7. Today, the lone remaining maker of combat-deployed M7 bayonets is Ontario Knife, though the knife is still available from at least one other company (Smith & Wesson).

Despite being issued by the United States military, the M7 was also made in Canada, West Germany, Australia, and in several countries in Asia.

How Does The M7 Work?

The M7 connects to the M16 via a lug thanks to a dual-lever locking mechanism. This secures the blade to the barrel while keeping the muzzle unblocked. A release mechanism on the pommel of the knife allows it to detach from the firearm easily.

Ontario Knife Company M7 Bayonet

Ontario Knife Company M7 Bayonet

Ontario Knife Co. was one of many makers to manufacture the M7, and it is the last to make the military issue variety of the blade. There is also a commercial version as well, which will be reviewed here.

It starts with a 1080 carbon steel blade with a zinc phosphate finish married to a modified Kraton handle. The blade is 6.7 inches long, and the whole construction is just shy of a foot in length. It tips the scales at 1.15 pounds. It looks beefy and feels hefty in the hand, as you would expect from a such a knife.

The included molded plastic sheath is a pistol belt clip. The lightweight sheath allows for safe, easy transport of the knife. While this knife is designed for combat, it’s burly design allows for multiple different uses. This would be a an excellent all-rounder when camping.

MSRP: $114.95

Read More

First Look: Imarku 9-Piece Knife Block Set With Sharpener

Mike Ableson
-
0

New Kitchen Knife Set From Imarku Looks Spectacular And Is Packed With Features That Any Home Chef Would Want.

The new 9-piece knife set from Imarku has everything a home cook could ask for. The most noticeable thing about it is the color and design. The rich blue hue of the knife block is complemented by the acrylic window that lets you look inside and see the knives while they’re inside the block.

Imarku has made a comprehensive knife set with this new release. The blades are made from high-carbon Japanese stainless steel, and the flat-edge knives are sharpened to a 16-degree edge with a Rockwell hardness of 57-59 HRC.

The set includes an 8.5-inch chef’s knife, 8.5-inch bread knife, 8-inch slicing knife, 7.5-inch Santoku, 6-inch boning knife, 5-inch utility knife, 3.5-inch paring knife, and a honing rod. The ergonomic pakkawood handle and tapered bolsters allow for an easy, firm grip when slicing and matches the bright blue of the solid walnut block. 

This knife set is not only an excellent set of tools for your kitchen, but it’s also a great conversation piece and will add a bright splash of color to any countertop.

MSRP: $599.99

Read More

First Look: GiantMouse GMF4

Mike Ableson
-
0

GiantMouse Has Taken A Big Step With Their New Fixed Blade. The GMF4 Is The Company’s Biggest Blade Ever And First Camp-Style Knife.

It’s a new era for GiantMouse. The company has stepped into the world of camp knives with the new GMF4. The knife is the company’s largest blade ever and comes in multiple finishes.

The star of the show is the blade. The N690 blade is 5.65 inches long, and the overall length is 10.45 inches. The steel has a flat grind and comes in two finishes: a traditional stonewash and a PVD stonewash. The PVD version is married to a Double Black Canvas Micarta handle, and the traditional blade is meted to a Double Red Canvas Micarta handle.

The handle is sturdy. The high flat saber grind is razor sharp, and the jimping helps stabilize it when cutting. There’s been a lot of thought put into the construction of this knife. A prime example of that is the lanyard hole.

Designed for outdoorsmen and campers, the lanyard hole is placed on the front of the knife so if a branch sneaks in there and pulls at the knife, it will be pulled forward and out of your hand rather than potentially snapping back and slicing you open.

No stone has been left unturned with this knife, and it will serve any and all campers well for a very long time.

MSRP: $245

Read More

First Degree Forge EDC Fighter Review: It Looks The Part But Does It Cut?

Msg Kim Breed (ret.)
-
0
First Degree Forge EDC Fighter Review: It Looks The Part But Does It Cut?

The EDC fixed blade proves itself more than just a pretty face.

After finding First Degree Forge’s website, I reached out to Joshua Brown about testing one of his knives for “Spec Sheet.” He agreed and sent me his EDC Fighter. The shape really caught my eye, along with the blue-and-black handle. The grinds are symmetrical from side to side. I checked the handle for any epoxy gaps and found none, though I did find a few areas that might cause a hot spot or two while cutting.

Light Cutting Tests

I went straight to the 20-pound bond copy paper for the initial sharpness check. The EDC Fighter zipped through the material quickly and repeatedly. I had to really concentrate on moving my fingers quickly so I didn’t leave any DNA on the paper or the knife. Joshua’s blade is very sharp indeed.

I had an extra box to pull a slicing piece from. The cardboard parted quickly. I could feel some friction as I finished the cuts. It was the medium dragging on the thick blade spine, giving the cardboard a slight curl. However, there was no slowdown in cutting.

EDC Fighter crunched its way through sisal rope.
The EDC Fighter crunched its way through 190 cuts in the sisal rope.

A piece of 8-ounce leather was next. The EDC Fighter sliced it smoothly and aggressively. I could hear every crunching slice, a sound that brings a smile to my face. The handle was comfortable but felt a tad thick for my hand.

I rolled right into some skiving with the same leather. The edge crunched into the material cleanly. Overall, the EDC Fighter was quite controllable at keeping the spacing between slices even. The flat-ground blade indexed perfectly off my finger.

Heavy Cutting Tests

Whittling time! The edge produced some thick curly-cues and wanted to bite deep into the wood (there was some possible wood grain deflection). The handle made for a secure cutting grip but the steel near the choil was sharp on my skin. A little sandpaper would remove the unwanted sharpness.

Next on the menu was some baton work on a knotted pine 2×4. The large handle was comfortable and stopped any shock from transferring to my hand. The blade drove smoothly through the wood with little damage—only a little smear on the finish.

EDC Fighter produced some thick curly-cues
The edge produced some thick curly-cues and wanted to bite deep into the wood. The handle made for a secure cutting grip but the steel area by the choil was unnecessarily sharp on the author’s skin. A little sandpaper would remove the unwanted edge.

The sharpness test on sisal rope awaited. The EDC Fighter crunched its way through 190 cuts. I found that the thumb rest also had a sharp edge to it—again, an easy fix with sandpaper. The handle was comfy and the palm swells worked great.

The final paper slice was barely different from the first. What little problem there was mostly was caused by the paper picking up some dampness in the air. The edge remained very sharp.

Last of all was my regular semi-destructive test—whacking the edge into a whitetail deer antler. I gave the knife 30 good antler chops and didn’t hurt the edge at all. Heat-treatment grade: great!

Botton Line

The EDC Fighter is a very nice knife, comfortable to hold and an outstanding performer.

Changes

Soften the previously mentioned non-blade sharp edges where fingers or thumb meet steel.

EDC Fighter Specs
Maker: Joshua Brown of First Degree Forge
Blade Length: 4”
Blade Material: 1084 carbon steel
Blade Finish: Blackened
Blade Grind: Flat w/fuller
Blade @ Thickest: 1/8”
Blade @ Widest: 1.5”
Handle: Blue-and-black G-10
Handle Pins: .25” black Micarta®
Spacers: Blue-and-black G-10
Overall length: 9.5”
Sheath: Leather
Maker’s price: $350

Read More Knife Reviews:

1...8910...19Page 9 of 19
Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

Wayne Goddard -
  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
forged in fire knifemaking tv show

8 Things You May Not Know About “Forged in Fire”

how to forge damascus steel

How to Forge Damascus

James Huse ordered a custom sheath by No Surrender Holsters for his BBQ knife.

How to Create Damascus Patterns

Why Are Switchblades Illegal?

Advertisement
Advertisement
BladeMag.com
Facebook Instagram Pinterest X