Buyer's Guides

You’re looking for a new knife in a certain style – we’ve got recommendations on the best blades for every price point.

Replaceable Blade Knives: Options To Always Keep You Sharp

1

In the field, these knives always help you keep your edge.

And now for a style of edged tool that brings its own brand of controversy most wherever it goes—the replaceable-blade knife. No, not the utility knives you see in a ton of kitchen junk drawers, tradesman’s tool bags and on garage workbenches, but the models made for hunting and possible EDC use.

The controversy tends to surface between the traditional knife-carrying crowd and those who appreciate convenience. As one who loves and teaches sharpening, I tend to leave the replacement blades for my utility knives. These days, however, they have made their way into many different knife styles.

I’m going to gauge how four of the latest replacement models cut and handle, and, most importantly in my mind, how easy it is to change a blade on each one.

Hogue Expel Scalpel 2.5

Hogue’s Expel Scalpel
You get a sturdy full-tang design with Hogue’s Expel Scalpel. A tight-fitting cover with a split ring carries the blade. Country of origin: USA.

Right off the bat, you will notice the Hogue Expel Scalpel 2.5 is some serious gear. The handle is a steel tang construction with textured G-10 scales in a blaze orange. The front bolster area is gimped, complete with a thumb ramp. Though the bolsters are screwed on the thumb ramp is not reversible, so sorry to all you southpaws out there. The handle is American made but the blade is marked England and #60. A #60 scalpel is used in dental surgery and postmortem work (it’s nice to know medical examiners wait for the person to expire before they start hacking into them with such a scalpel). Instead of stainless the blade is a high carbon steel. If you want to prolong the life of the Expel’s replacement blade, you can easily strop it.

Since it is an actual scalpel blade, that means you should be able to source multiples of them easy enough. I would go online and order. Since the pattern is used for postmortem work, that would raise fewer eyebrows. I did a quick check and was able to find a pack of 20 of the blades for around $10.

Hogue’s design for its replaceable blade knife uses the traditional blade mounting system. The best way to change the blade is with a pair of pliers. Doctors usually use a set of forceps. Handling wise the knife is quick and nimble. You hold it like a regular scalpel, with your index finger along the blade spine, and guide the edge. It comes with a zipped pouch and a plastic sleeve that fits over the blade. Having the textured G-10 scales and beefier handle contour enhances purchase. I like the design. It fits my hand well. I had perfect control over the edge. I wouldn’t hesitate to take this with me hunting and use it as a caping knife. I certainly will be packing it for pheasant hunting this fall to process the birds and clean up the gizzards.

Hogue Expel Scalpel 2.5 Specs
Overall Length: 7″
Closed Length: Not applicable
Blade Length: 2.5″
Handle material: Orange G-10
MSRP: $114.95

Coast 1919 Reserve Shift

Selection of blades for Coast 1919
The selection of blades Coast supplies with the 1919 is compatible with regular utility blades. From top: an attached regular utility blade, drop point and gut hook. Country of origin: China.

With the 1919 Reserve Shift, Coast has gone with more of a traditional utility folder design. Don’t let that fool you, though, because the knife does offer some innovations. Coast has patented both the blade changing arrangement—called the swap out system—as well as the blade storage system. Two of the three blade styles that come with the knife are customized: the spear tip and gut hook. The third is a regular utility pattern. The system is compatible with standard utility blades, which means you can buy other patterns such as serrated and a roofer’s hooked blades. I don’t know why the company bothered designing a gut hook, as a hooked utility blade would work just as well. The handle is a glass reinforced nylon with a textured rubber insert. The 1919 carries in a pouch sheath.

There are two locking systems. The primary is a linerlock and a double lock prevents the liner from moving to the side. A thumb stud provides ambidextrous one-hand opening. The stud is also part of the opening system. Depress the button on the stud, slide the stud down and the blade comes out.

The blade release system works well but, as far as innovation goes, it doesn’t draw a “wow” from me. Conversely, that Coast bothered to care about how easy it is for you to access the extra blade storage is impressive. It is a straightforward arrangement but, after all, what good is a replaceable-blade system if you can’t get at the extra blades?

Overall, the knife handles like any other utility folder, but the devil is in the details. All the little extras help it edge out the other similar designs. Best of all, except for the proprietary blades, you can pretty much walk into a Walmart and get a blade for the 1919.

Coast 1919 Reserve Shift Specs
Overall Length: 6.875″
Closed Length: 4.375″
Blade Length: 2.5″
Handle material: Glass reinforced nylon w/textured rubber inlay
MSRP: $39.99

Havalon Piranta Bolt

thumb disc on the Havalon Bolt’s blade holder
Note the thumb disc on the Havalon Bolt’s blade holder, which makes ambidextrous opening possible. Also, the bright orange ABS handle on this replaceable blade knife makes it more likely you will find the knife if you ever set it down. Country of origin: handle made in Taiwan and the blades are made in India.

The Havalon Piranta Bolt is a blend between the Coast 1919 and the Hogue Expel Scalpel. The Bolt uses a #60 surgical blade like the Expel Scalpel, though Havalon’s is marked 60A and listed as stainless steel. The blade opens via an ambidextrous thumb disc and locks via a linerlock like the 1919.

A belt carry case houses 12 extra blades. If you only occasionally stropped your blades instead of changing them out, you would have a ton of cutting time. The handle is a bright orange ABS plastic with a textured rubber insert. It feels blocky in the hand. Using ABS plastic keeps the knife lightweight. Between the lightweight feel of the plastic and the lack of contouring, it is not a comfortable grip. The small, trim-profile pocket clip is stronger than it looks.

Havalon gets innovative as far as providing a blade-replacing tool. When changing a scalpel blade, normally you take a set of forceps or a pliers and lift up the back end and push the blade forward. Havalon’s little clamshell-style tool closes around the blade so the edge is not exposed. Snap the tool closed and the rear of the blade bends upward, enabling you to pull the blade off the holder. It worked every time I tried it and it didn’t damage the blade. I was even able to reinstall the same blade. An issue is that there is no place to store the tool in the pouch and, due to its size, would be easy to misplace/lose.

Havalon Piranta Bolt Specs
Overall Length: 7.375″
Closed Length: 4.5″
Blade Length: 2.75″
Handle material: ABS plastic w/rubber inlay
MSRP: $54.99

Kershaw LoneRock RBK 2

Kershaw fixed-blade handle
Kershaw also includes a fixed-blade handle with its replaceable blade knife’s kit. It’s lightweight and the texture and profile offer plenty of purchase power.

The Kershaw LoneRock RBK 2 is another replaceable model that uses a #60 scalpel blade. (I’m starting to feel like a few of these companies had a meeting and I wasn’t invited.) The RBK 2 comes with 14 extra blades in a carry case and one on the knife. A pocket in the belt pouch holds the carry case. A cool feature of the case is a slash pocket for the knife, making it easier to get a purchase on the handle for deployment.

Speaking of the handle, it’s glass filled nylon with rubber overlay. It’s listed as black and tan but looks more like black and green. If I had to pick something Kershaw should have had more foresight about, it’s the color. Green and black pretty much screams “lose me” for a hunting knife. On the other hand, for caping the #60 scalpel blades should do the trick. Also, Kershaw did a great job contouring the handle so it’s easy and comfortable to hold. The blade opens ambidextrously via the double thumb stud and secures via a linerlock. There is no pocket clip, though there is a hole for a lanyard.

Kershaw really put its thinking cap on when it comes to tool-less blade removal. A liner lifts the rear of the scalpel blade, enabling you to slide the blade off. However, I would still play it safe and grab the blade with, say, a pair of pliers. During use I never had an issue with the removal liner being bumped, but I will wait and see. I must say, Kershaw impressed me with this one.

Kershaw LoneRock RBK 2 Specs
Overall Length: 7.2″
Closed Length: 4.4″
Blade Length: 2.8″
Handle material: Glass filled nylon w/rubber overlay
MSRP: $47.99

Points To Ponder

Replaceable-blade knives add to the depth of edged tools available in the cutlery world. As with all knives, they have their place. They have already experienced some popularity among certain trades and professions. If you like to sharpen, remember that even a replaceable blade can be touched up at times.

Check Out More Outdoor Knives And Tools:

TILI Ultralight Review: How Good Is This Small Fixed Blade?

The TILI Ultralight By Origin Handcrafted Goods Might Be Small But It Packs One Heck Of A Bite.

The TILI Ultralight by Origin Handcrafted Goods is a small fixed blade that can fit in your pocket like a pocketknife with no need to figure out how to open the blade or disengage a safety. Pull it clear of the pocket sheath and you’re ready to cut. Among the things I love about smaller fixed blades is that people don’t give you the evil stink eye when you use the knives in public.

Testing The Ultralight 

TILI Ultralight cutting paper
The TILI Ultralight handled slicing copy paper with ease.

I started with a simple paper slice using 20-pound bond copy paper. The TILI sliced very smoothly using both a draw cut and a push cut. The knife was controllable in making the width of the slices—I just had to move my fingers out of the way fast.

Next up: single-walled cardboard. The handle shape of the TILI Ultralight made for extremely controllable slices in the cardboard as well. I could hear the aggressive edge as it sliced. The edge is very fine and ideal for such a job.

Plastic board was next. There was a little more blade grab in this medium as the TILI’s blade bevel is short—around 3/8 of an inch. The full thickness of the blade engaged the plastic board quickly. It still made quick, clean cuts as fast as I could move my fingers.

The little fixed blade produced beautiful curly-cues in half-inch pine, producing nice, clean cuts. It was easy to control the depth and thickness of the curly-cues. The TILI Ultralight is great for making fire sticks and a handy little knife to put in a pack. It would be excellent at cleaning small game.

Slicing Through Challenges

TILI Ultralight cutting pine knott
The author drove the edge through a pine knot twice. He felt some micro chipping on the edge but it still cut great.

Skiving leather strips was next on the menu. The blade made a forceful crunching sound as it parted the 8-ounce leather. The small blade was controllable in making the slices thin. It favored skiving with the tip more than with the blade’s belly. This is a very sharp knife!

To push the fine edge more, I switched to 3/8-inch sisal rope. The TILI crunched to 125 cuts before my hand said “enough!” It’s hard to keep the pressure on a thin knife without your hand getting sore somewhere. The edge was still sharp and ready for more.

I switched to half-inch pine for some baton practice. The knife was easy to hold onto and it split the wood great. I even drove the edge through a knot twice. I felt some micro chipping on the edge but it still cut great. The steel might be a point too hard on the Rockwell hardness scale for heavy work. Keep the use to slicing and you won’t have any issues.

The TILI comes with a leather pouch sheath to protect the blade. I would put stainless steel pins in the holes at the end of the sheath to prevent accidental penetration as this knife is very pointy and razor sharp.

Bottom line: The TILI Ultralight is a handy knife that’s a perfect little backup blade for all-around use.

Changes I’d Make To The TILI Ultralight

I would add a couple of thumb notches on the blade and extra protection on the tip of the sheath to prevent blade penetration. (EDITOR’S NOTE: The latter is especially crucial if you carry the knife sheathed in your pocket.)

TILI Ultralight Specs

Blade Length: 2.38 inches
Blade Material: 1095 carbon steel
Blade Grind: Hollow
Heat Treat: Differentially Hardened with Hamon
Handle: Skeletonized Steel with hole for included leather lanyard
Weight: 2 ounces
Overall Length: 2.75 inches
Sheath: Black Veggie Tanned Leather
Weight with Sheath: 3 ounces
MSRP: $125

Read More

First Look: True Knives Berm Cleaver Flipper

A budge-priced EDC cleaver that is priced for rough use.

Cleavers have broken out of the butcher shop and kitchen in recent years to become a sought-after EDC. Seems counterintuitive, but there’s a method in the knife-buying world’s madness.

One of the more interesting conversations I had at BLADE Show West 2024 came with a crane rigger who favored this style of blade.  With the flat cutting edge that makes mincemeat of heavy-duty rope and a muted tip, he didn’t have to worry about perforating himself, the knife class is highly practical in the pocket.

This is all a long way to say, there’s a new pocket cleaver in town with True Knives dropping the Berm Cleaver Flipper.

Part of the brand’s new Berm series, the knife offers a budget option most users won’t shy away from rough use. Yet, for its price, the knife offers a nice profile, though it might lack some in the steel True Knives uses for the blade.

Berm Cleaver Flipper Blade

To that point, the Berm Cleaver Flipper is constructed of 7Cr17MoV, a popular choice in budget knives. While the metal does take a good edge and has respectable hardness and excellent corrosion resistance, it has a few hitches in its giddyap. In particular, its toughness—particularly in thinner blades—is wanting, and edge retention is not among the best.

Still, this is a budget EDC we’re talking about.  Despite the steel’s drawback, True Knife has come up with a fairly spiffy blade profile. The knife has a fairly traditional cleaver look, though the 2.5-inch blade boasts a slight belly and does have a bit of a tip. The tip is welcome, making the knife more useful for everyday tasks where a puncturing point is required.

The brand includes generous jimping on nearly the entirety of the spine, offering extra purchase on chopping tasks. Additionally, there is a good choil on the blade, which helps in making sure you can sharpen the entire blade.

Berm Cleaver Flipper Handle

The grip is where the cleaver shines, with a relatively nice affair laid out. First off, I’m a sucker for the translucent green G-10, it gives the knife a modern look without being too audacious. Plus, particularly on a build at this price point, the G-10 is a solid material choice—textured nicely to make it stick to the hand.

Also appreciated, the cleaver’s clip is not only reversible but can be situated for tip-up or down carry. A versatile bonus on the knife.

Berm Cleaver Flipper Action

As its name suggests, the Berm Cleaver Flipper, though it’s a front flipper offering both index finger and thumb deployment. Additionally, it has a prominent thumb hole.

Smartly, True Knives has cut away some of the handle to offer access to the deployment mechanism, allowing users plenty of leverage options to get the blade to work. Caged bearing aids in a smooth and fast opening.

Final Cut

With an MSRP of $30, the Berm Cleaver Flipper is made for heavy use and abuse. The best part, if you put it through the wringer you won’t cry over a broken knife.

Check Out Our Knife Reviews:

2024 BLADE Show Debuts: New Knives Launched In Atlanta

In the conclusion, consider the balance of the BLADE Show’s factory knife debuts

It’s hard to believe it’s been almost three months since BLADE Show 2024 blew the doors off the Cobb Galleria Centre in Atlanta. With all the commotion and introductions of new knives, even if you were there you couldn’t help but miss many.

Previously we featured some of the factory knives that debuted in the Cobb but, as those of you who were paying attention know, we didn’t have enough room for the balance of the few we were able to assemble. Ergo, the conclusion this time. We think you will enjoy them all.
As for the many we are unable to publish in this two-part story due to space and other limitations, stay tuned to future issues of BLADE® for a goodly number of them.

Kershaw Tilt 50th Anniversary

Kershaw Tilt 50th Anniversary

Knife type: Folder
Blade length: 3.65”
Blade steel: CPM CruWear, 14C28N
Rockwell hardness: 60-62 HRC
Blade grind: Flat
Blade @ thickest: .156”
Blade pattern: Composite
Blade finish: Bead-blasted
Blade opener: Flipper tab
Handle material: Titanium
Lock: Sub-Frame
Pivot materials: KVT ball-bearings
Pocket clip material: Titanium
Weight: 5.7 ozs.
Closed length: 5.8”
Knife to know: Carbon fiber inlay front and bank; hidden hardware
Country of origin: USA
MSRP: $500
Available: NOW


A.G. Russell Knives Premium Scout

A.G. Russell Knives Premium Scout

Model type: Traditional slipjoint pocketknife
Designer: A.G. Russell
Main blade length: 2 5/8”
Blade steel: VG-10 stainless
Rockwell hardness: 59-61 HRC
Blade grind: Flat
Blade @ thickest: .09”
Blade pattern: Spear point
Blade finish: Satin
Blade opener: Nail nick
Handle material options: Stag and red saw-cut bone
Weight: 3.5-3.7 ozs.
Closed length: 3 3/4”
Special features: Can opener, screwdriver, caplifter & leather punch
Country of origin: China
MSRP: $74.95-$94.95
Available: NOW


CobraTec Koonsman

CobraTec Koonsman

Knife type: Fixed-blade hunter
Designer: Chad Cochran
Blade length: 4”
Blade material: D2 tool steel
Rockwell hardness: 61 HRC
Blade grind: Convex
Blade @ widest: 1.125”
Blade pattern: Drop point
Blade finish: Satin
Construction: Full Tang
Handle material: Micarta® in color options of black, green and tan
Weight: 5.7 ozs.
Overall length: 8.4375”
Sheath type and materials: Belt/pouch and leather
Country of origin: China
MSRP: $79.99
Available: NOW


Bradford USA Gatsby

Bradford USA Gatsby

Knife type: Specialty steak knife
Blade length: 4.5”
Blade steel: N690 stainless
Rockwell hardness: 61 HRC
Blade grind: Full height flat
Blade @ thickest: .11”
Blade finish options: Stonewash and high polish
Handle material options: Maroon, wheat, ivory canvas Micarta® and carbon fiber
Overall length: 8.5”
Country of origin: USA
MSRP: $199
Available: NOW


Spyderco Techno 3

Spyderco Techno 3

Knife type: Folder
Designer: Marcin Slysz
Blade length: 2.64”
Blade steel: CTS XHP stainless
Blade grind: High flat
Blade @ thickest: .127”
Blade pattern: Drop point
Blade finish: Satin
Blade opener: Flipper
Handle material: Titanium
Lock: Reeve Integral Lock (R.I.L.)
Pivot material: Ball bearings
Pocket clip material and type: Titanium, right-handed, tip-up 
Weight: 3.3 ozs.
Closed length: 3.7”
Country of origin: Italy
MSRP: $400
Available: To be announced


Boker Plus Cutweazle

Boker Plus Cutweazle

Knife type: Utility 
Designer: Ben Logan/Turnback Knife Co.
Blade length: 1.18”
Blade steel: Standard replaceable stainless utility blade
Blade grind: Flat
Blade @ thickest: .03”
Blade finish: Satin
Handle material: G-10/stainless steel 
Lock: Button lock
Blade opener: Thumb slide
Pocket clip material and type: Stainless steel, deep carry, right-handed, tip-down 
Weight: 1.38 ozs.
Closed length: 3.7”
Special features: Push button on slide lock allows the blade to be pushed forward in stages or in a single movement and locked in the predetermined recesses; retracts into the handle when pushed again w/a sliding movement
Country of origin: China
MSRP: $56.95 
Available: September 2024


Browning Primal Scalpel 2-Blade

Browning Primal Scalpel 2-Blade

Main blade length: 2.75”
Blade steel: 420-J2 stainless
Rockwell hardness: Scalpel 50-55 HRC, drop point 55-59 HRC
Blade openers: Thumb stud and nail nick
Lock: Linerlock
Handle: Synthetic in orange or black
Pocket clip: Tip-up
Closed length: 4 1/8”
Country of origin: China
MSRP: $59.99
Available: NOW


Stroup Knives MK2

Stroup Knives MK2

Knife type: Fixed blade
Designer: Unnamed active-duty Tier 1 Operator
Blade length: 4”
Blade material: 1095 carbon steel
Rockwell hardness: 58 HRC
Blade grind: Flat
Blade @ thickest: 3/16”
Blade pattern: Spear point
Blade finish: Acid etched & rock tumbled
Construction: Full Tang
Handle material: G10 & nitrile
Pocket clip: Designed by Discreet Carry Concepts, Inc.
Weight: 4.2 ozs.
Overall length: 8”
Sheath material: Kydex
Knife to know: The nitrile in the handle provides extra grip, especially when wet
Country of origin: USA
MSRP: $279.99
Available: NOW


Lionsteel Twain

Lionsteel Twain

Model type: EDC folder
Blade length: 3.15”
Blade steel: CPM MagnaCut stainless
Blade grind: Flat
Handle material: Titanium + carbon fiber or Micarta®
Lock: Button lock
Pocket clip type and material: Bent steel
Special features: Double Solid construction (integral frame and integral handle)
Weight: 3.03 ozs.
Closed length: 4.14”
Country of origin: Italy
MSRP: $380
Available: NOW


KME Precision Control Plus/Professional Knife Sharpening System

KME Precision Control Plus/Professional Knife Sharpening System

Abrasive type: Diamond-coated stones
Grit assortment: 140, 300, 600, 1,500
Dimensions: 13” x 12” x 8”
Construction materials: CNC-machined, anodized aluminum components, laser-cut, powder-coated steel base, CNC cherry hardwood grip, stainless-steel-backed diamond stones
Weight: 2 lbs., 13.9 ozs.
Blade sizes sharpened: Maximum-blade-thickness saber grind 3/8” or more and full flat grind 3/16”
Angle range: 10 to 45 degrees per side
Special features: Smooth friction-drive angle system w/micro adjustment feature; operates w/one hand and absolute angle control; rod end guide w/360° rotation; threaded Monopod brace provides rock-solid sharpening platform; adjustable stone carrier w/magnetic plate for angle cube sharpening uses any stone between 4” and 6”; full line of accessory stones, strops and diamond lapping films in both 4” and 6” lengths
Country of origin: USA
MSRP: $474.95
Available: NOW


CIVIVI Biophase

CIVIVI Biophase

Knife type: Folder
Blade length: 3.48”
Blade steel: Nitro-V stainless
Rockwell hardness: 58-60 HRC
Blade grind: Hollow
Blade @ thickest: .12”
Blade finish: Black stonewash (satin finish and black stonewash w/satin flat and damascus are optional)
Handle material: Aluminum & G-10
Lock: Button lock
Blade opener: Flipper tab
Pivot materials: Stainless steel pivot w/caged ceramic ball bearings
Pocket clip material and type: Stainless steel, tip-up, ambidextrous
Weight: 2.61 ozs.
Closed length: 4.67”
Country of origin: China
MSRP: $98.70 at press-time exchange rate
Available: Late summer


RoseCraft Clinch River Button Lock

RoseCraft Clinch River Button Lock

Model type: Modern/traditional pocketknife
Blade length: 3.125”
Blade material: M390 stainless
Blade grind: Flat
Handle material: Micarta® or Ultem w/titanium bolster & liners
Lock: Button lock
Pocket clip material: Titanium
Knife to know: Modern take on the Clinch River Swayback that won BLADE Magazine 2023 Imported Knife of the Year®; opens and closes via a button lock
Weight: 2.8 ozs.
Closed length: 4”
Country of origin: China
MSRP: $129.99
Available: NOW


CRKT Nucleus

CRKT Nucleus

Knife type: Folder 
Designer: Princeton Wong
Blade length: 3.19”
Blade steel: 12C27 stainless
Rockwell hardness: 58-60 HRC
Blade grind: Flat
Blade @ thickest: .13”
Blade pattern: Reverse tanto
Blade finish: Bead blast
Construction: Screw
Handle material: Stainless steel w/G-10 overlay
Lock: Framelock
Blade openers: Front and rear flipper tabs & blade hole
Pivot material: Ikoma Korth Bearing System (ball bearings)
Pocket clip material and type: Stainless steel; tip-up
Weight: 3.1 ozs.
Closed length: 4.19”
Country of origin: China
MSRP: $113
Knife to know: The knife opens three ways: front and rear flipper tabs and via the blade hole
Available: NOW


Halfbreed MIK-04 SOFMAK

Halfbreed MIK-04 SOFMAK

Knife type: Fixed blade
Blade steel: K340 stainless
Rockwell hardness: 59-60 HRC
Blade finish: PVD coat
Blade style: Drop point
Blade length: 5.31”
Blade @ thickest: .25”
Handle material: G-10
Weight: 11.14 ozs.
Overall length: 10.31”
Sheath material: Injection molded plastic
Mounting: Belt & PALS/MOLLE (DOTS)
Country of origin: Comprises Australian & Taiwanese make
MSRP: $285
Knife to know: The knife is a collaboration between Halfbreed and Joseph Teti, Force Recon Marine and Army Special Forces Green Beret veteran and former operative with the CIA Special Activities Division/Special Operations Group; MIK stands for medium infantry knife and SOFMAK for special operations forces multi-purpose assault knife
MSRP: $285
Available: September 2024


ESNYX Silver Line Beer Buster Jr.

ESNYX Silver Line Beer Buster Jr.

Knife type: Slipjoint
Blade length: 2.63”
Blade steel: M390 stainless
Blade @ thickest: .125”
Blade grind: Flat
Blade pattern: Drop point
Blade finish: Handrubbed satin
Blade opener: Nail nick
Handle: Blasted titanium
Weight: 2 ozs.
Closed length: 3.5”
Country of origin: China
Knife to know: Slipjoint has half stop; bottle-shaped handle shield; bottle opener in butt
MSRP: $265
Available: NOW


Rough Ryder Reserve Whiskey Ryder

Rough Ryder Reserve Whiskey Ryder

Knife type: Swayback doctor’s knife slipjoint
Designer: Brian Wilhoite
Blade length: 3.5”
Blade material: D2 tool steel
Blade @ thickest: 3/16”
Blade pattern: Wharncliffe
Blade finish: Brushed satin
Handle material: Black burlap Micarta®
Weight: 3.2 ozs.
Closed length: 4.5”
Special features: Slipjoint features half stop
Country of origin: China
MSRP: $54.99
Available: NOW


Warthog V-Sharp A4 Model

Warthog V-Sharp A4 Model

Sharpener Type: Patented V-Sharp spring-loaded pull-through
Abrasive Type: Diamond-coated
Grit selection: 325 grit natural diamond hone & hardened hone steel for finishing the edge (270, 325, 600, 1,000 and ceramic hones available)
Dimensions: 8.75” x 8.25” x 2.25”
Construction Materials: Lightweight zinc-cast metal frame, non-slip rubber base and durable powder coat finish
Weight: 1.1 lbs.
Special Features: Four adjustable sharpening angles: 15, 20, 25 & 30 degrees
Types of blades sharpened: All plain-edge knives; serrated knives can be sharpened w/the ceramic hones
Country of origin: South Africa
MSRP: $109.99
Available: NOW


SOG Knives Bulwark

SOG Knives Bulwark

Designer: Mikkel Willumsen
Knife type: EDC flipper folder
Blade length: 3”
Blade material: D2 tool steel
Blade grind: Hollow
Blade @ thickest: .14”
Blade finish: Black PVD coat
Blade pattern: Drop point
Blade openers: Flipper tab and blade hole
Handle material: Micarta® in blue and OD green color options
Pocket clip: Tip-up
Lock: Framelock
Weight: 6.25 ozs.
Closed length: 4.2”
Country of origin: China
MSRP: $134.99
Available: Late summer 2024


Cold Steel Recon M1

Cold Steel Recon M1

Knife type: EDC folder
Blade length: 4”
Blade steel: CPM MagnaCut stainless
Blade finish: Stonewash
Blade pattern: Clip point
Handle material: G-10
Lock: Tri-Ad
Pocket clip: Yes
Weight: 5.2 ozs.
Closed length: 5.5”
Country of origin: Italy
MSRP: $259.99
Available: NOW


Check Out More Buyer’s Guides:

Vosteed Mayhem: The Compression Lock Rides Again

A top-end offering, the Vosteed Mayhem takes a run at proven, yet challenging locking mechanism.

Prolific in its offerings, they must not sleep much over at Vosteed Knives. Yet, the company’s productivity has generally been knife buyer’s gain—at least those attracted to mid-priced fidgety options that by and large have fairly decent lines. Though, one of its latest releases should turn heads if only to see if Vosteed indeed has been able to pull off what few other companies have dared.

Christened the Mayhem (a prototype was showcased at their table at the 2023 BLADE Show), the collaboration with Rob Saniscalchi of R.S. Knifeworks boasts what the firm defines as a hybrid frame/compression lock. Some might recognize the latter aspect of the system as the same mechanism developed and used to great effect by Spyderco. The Colorado company’s patent on the mechanism ran out a few years ago, making it fair game and clone fodder. But given the tight tolerance required for the lock to operate properly, few companies have given it a run.

The Sypderco system is operated by a leaf spring wedging laterally between a ramp on the tang and a stop pin. The system was smooth and easy to operate, as well as strong as the dickens—given pressure is exerted directly down on the spring’s vertical surface, preventing potential bowing. Vosteed appears to operate almost identically, though a bit of the geometry on the blade’s lock elements differ. At arm’s length, Vosteed’s attempt appears on track, but only time and plenty of fiddling by owners will prove if the company truly got it right.

Vosteed Mayhem black and gray finishes
Photo: Instagram

As to its operation, the lock is actuated by a push button on the spine. The system allows for wrist opening, but as has been Vosteed’s OM for some time, it outfitted the Mayhem with multiple deployment options. In this case, both a thumb hole and a kicker; a pair of caged ceramic ball bearings aid in a smooth and fast deployment.

Vosteed offers the Mayhem with a couple of different options. Perhaps the imperative one is the choice between a Wharncliff or sheepsfoot blade, each coming in a 3.3-inch in length and constructed from the highly desirable M390 steel. Each blade has a compound grind, but this appears a play at aesthetics, given the thicker rear grind seems too small for practicality. The blades also feature a choil, so you can choke up, even though the titanium scale is ample enough to land all five fingers of a large hand. The scale itself is clean, with a closed rear and texturing across its back, not to mention a nice taper up to the blade to allow for a firm grip.

The other choice buyers have to make on the Mayhem is finish, with a stonewashed black PVD coating and gray satin options on the menu. The gray version is gray from top to bottom—outside a gold pivot collar—accentuating the knife’s tidy design, while the black iteration is a bit more boisterous boasting gold hardware. Note, the knife offers tip-up carry with a non-reversible titanium clip.

Vosteed Mayhem gray
Photo: Instagram

The Vosteed Mayhem is a break from what most have come to expect from the company, which has made its bones at the affordable end of the market. The new knife—no matter options—runs $250. However, if it proves well executed, most likely will find this money well spent.

Check Out More Buyer’s Guides:

New Knives: Must-Have Production And Custom Blades

From kitchen to camp and beyond, these puppies will perform.

Christmas may have passed and all your presents have been unwrapped, but that doesn’t mean you can’t start building out your wish list for the coming year. We’re here to help with a slew of new knives—and non-knives—that are certain to tantalize and tempt. From production options full of pomp and customs cutting one-of-a-kind profiles, there’s something for knife lover.

Greiner Chef’s Knife

Greiner Chef's Knife

Blade length: 10”
Blade material: 80CrV2 carbon steel w/forged finish
Blade grind: Flat
Handle material: Double-stabilized karelian birch
Overall length: 14.5”
Maker’s price for a similar knife: $600
Maker: Erik Greiner, greinerblades.com (SharpByCoop image)


Franklin Bread Knife

Franklin Bread Knife

Blade length: 9.25”
Blade material: 52100 carbon steel
Handle material: Hawaiian koa
Overall length: 14”
Maker’s price for a similar knife: $575
Knife to know: Also comes in a set of three that includes chef’s and paring knives w/a price of $1,750 for the entire set; Thomas Franklin is an ABS apprentice smith
Maker: Thomas Franklin (Jfrasierphotography.com)


Spyderco Petty

Spyderco Petty

Designer: ABS master smith Murray Carter
Blade length: 4.64”
Blade steel: CTS BD1N stainless
Blade grind: Full-flat
Blade @ thickest: .068”
Handle design: Wa style (octagonal)
Handle material: Black polypropylene
Weight: 1.8 ozs.
Overall length: 8.87”
Knife to know: The Petty is part of Spyderco’s Minarai Series; meaning “to look and learn,” minarai is the Japanese way of describing the role of an apprentice
Country of origin: Japan
Company: Spyderco, spyderco.com


Morakniv Rombo

Morakniv Rombo

Model: Camp chef’s knife
Blade length: 3.86”
Blade steel: Swedish stainless
Blade grind: Flat
Blade @ thickest: .09”
Blade finish: Two-tone
Handle material: Wood
Weight: 5.5 ozs.
Overall length: 8”
Country of origin: Sweden
Knife to know: Designed for right-hand use
MSRP: $230 (at press time rate of exchange)
Company: Morakniv, industrialrev.com


Spartan Blades Poros

Spartan Blades Poros

Designer: Curtis Iovito
Knife type: Flipper folder
Blade length: 3.75”
Blade steel: 154CM stainless
Rockwell hardness: 58-60 HRC
Blade grind: Flat
Blade @ thickest: .125”
Blade finish: Black titanium nitride coating
Blade pattern: Drop point
Pivot action: Ikoma Korth Bearing System (IKBS)
Handle material: Carbon fiber/G-10 composite
Lock: Linerlock
Pocket clip: Deep carry
Hardware & liner: Stainless steel w/black electro-deposit powder coating
Weight: 5.3 ozs.
Closed length: 4.25”
Country of origin: USA
MSRP: $190
Company: Spartan Blades, spartanbladesusa.com


Cold Steel The Republic

Cold Steel The Republic

Knife type: Bushcraft fixed blade
Blade length: 5”
Blade steel: CPM S35VN stainless
Rockwell hardness: 58-60 HRC
Blade @ thickest: .1535”
Blade finish: Corrosion resistant/no-glare Ionbond
Blade pattern: Drop point
Handle material: Micarta® w/single integral guard and lanyard hole
Knife to know: Handle is removable for customization based on situation/undertaking; spine gimping for extra control
Weight: 8.4 ozs.
Overall length: 10”
Sheath: Leather pouch
MSRP: $269.99
Country of origin: USA
Company: Cold Steel, coldsteel.com


WE Knife Zonda

WE Knife Zonda

Pattern: Flipper folder
Blade length: 4.04”
Blade steel: CPM 20CV stainless
Blade finish: Stonewashed
Blade @ thickest: .13”
Handle material: Black titanium w/flamed titanium inlay
Pocket clip: Right-hand, blade-tip-up carry
Lock: Framelock
Closed length: 4.85”
Country of origin: China
MSRP: $480
Company: WE Knife, weknife.com


Halfbreed Blades MILF-03PS

HHA MILF

Blade length: 3.54”
Blade steel: CPM S30V stainless
Rockwell hardness: 59-60 HRC
Blade grind: Hollow
Blade @ thickest: .19”
Blade finish: PVD coat
Blade pattern: Tanto
Handle material: G-10
Washers: Phosphor bronze
Weight: 7.34 ozs.
Closed length: 5.51”
Handle @ thickest: .59”
Country of origin: Australian and Taiwanese make
MSRP: $280
Company: Halfbreed Blades, halfbreedblades.com.au


Schubert Knives Large Damascus Slicer

Schubert Knives Large Damascus Slicer

Blade length: 19.3”
Blade material: 90-layer raindrop-pattern damascus of 1084 carbon and 15N20 nickel-alloy steels
Blade grind: Flat
Blade @ widest: 1.77”
Bolster/guard material: Copper and buffalo horn w/soldered joint
Handle material: Stabilized blackheart sassafras
Handle pins: Turned whale tooth and bamboo
Overall length: 26.4”
Scabbard (not shown): Glass lacquered wood inlaid w/black heart sassafras, buffalo horn, copper and whale tooth
Maker: Bruce Schubert (Rod Hoare image)


Mark Josef Knives Sujihiki

Mark Josef Knives Sujihiki

Pattern: Slicer
Blade length: 11.8”
Blade material: San-mai construction of 410 stainless steel, nickel and 52100 carbon steel forged by Brook Turner
Rockwell hardness: 62 HRC
Blade grind: Flat/convex
Blade thickness @ ricasso: .118”
Blade @ widest: 1.496”
Handle material: Coolabah burl
Bolster/guard: African blackwood
Overall length: 18.5”
Maker: Marc Stewart, Mark Josef Knives, marcjosefknives.com.au (Rod Hoare image)


TOPS Knives El Pionero

TOPS Knives El Pionero

Designer: Ed Calderon
Blade length: 3.38”
Blade material: 1095 carbon steel
Blade @ thickest: .09”
Blade finish: Tumble
Handle material: Tan canvas Micarta® w/finger divot that aids in blade orientation, etc.
Weight: 2.9 ozs.
Overall length: 7.63”
Sheath: Black Kydex
Weight w/sheath: 4.1 ozs.
Knife to know: The El Pionero is a “paring knife-esque design”; Ed Calderon (edsmanifesto.com) worked as a counter-narcotics officer in Mexico and more recently as a trainer and “guru in the tactical space”
Country of origin: USA
MSRP: $220
Company: TOPS Knives, topsknives.com


Dr. Jim Lucie: A Bladesmith’s Life & Legacy

Dr. Jim Lucie: A Bladesmith’s Life & Legacy

What it’s about: ABS journeyman smith Dr. Jim Lucie had a unique background: he served as the personal physician for, and learned about knifemaking from, the man recognized as the grandfather of custom knives—BLADE Magazine Cutlery Hall-Of-Fame® member William Scagel. The author, Stephanie Lucie, is Lucie’s youngest of four daughters. She paints a picture of her father like no other, from childhood to adulthood, his bladesmithing mentors and friends, the many stories written about him and much more.
Format: 9.25 x 12.5-inch hardback, limited to 1,500 copies in the first edition, over 300 color photos, including more than 200 knives Lucie made, and over 100 pictures of his life and accomplishments.
MSRP: $120
Contact: jimluciebook.com

Check Out More Knife Drops:

8 Best Puukko Knife Options

Puukko Knives Are A Traditional Knife Of The Nordic Countries. It Is Used For Everything From Hunting To Chopping Vegetables

Puukko is Finnish for “knife.” It is deeply rooted in Scandinavian countries where the knife is both tool and art form. In fact, the puukko plays an important part in Nordic culture. Often included as part of the traditional cultural dress, the puukko is a historical symbol, especially in Finland and Northern Scandinavia.

The Finns treat the knife with deep respect. Many men in the country take great pride in how they carve their knife’s handle. It’s so ingrained in the culture that the Finnish Defense Forces don’t issue a standard knife to its soldiers. Instead, most men simply bring their own puukko with them into service.

What Is A Puukko Knife?

Rich history aside, puukkos are first and foremost solid work knives. They are of basic construction, consisting of a high carbon steel blade mated with a handle that is usually of a natural material, though some modern versions are synthetic.

The steel is traditionally crucible steel made from limonite iron, which was almost exclusively the type of steel made in Finland before more modern manufacturing methods were invented in the 19th century.

Primary uses are woodcarving and food prep as well as most anything requiring a cutting tool. Outside the Nordic culture, puukkos have earned a solid reputation as stout knives built for serious labor. It’s easy to see why these knives are favored among outdoor folks.

If you spend time camping or hiking or are simply in need of a good, solid fixed blade that withstands hard use and requires low maintenance, consider the sleek, slender puukko.

What Is A Puukko Handle Made Of?

One of the more common puukko handle materials is Masur (curly birch, though you’ll also find antler, bone, leather, and other hardwoods. Modern factory-made knives can come with a plastic handle instead of using traditional materials. The handle has no guard, and the blade boasts a gentle upsweep to the edge to facilitate easy cutting.

Puukko Sheaths

Puukko sheaths are usually leather and may or may not have fancy tooling. A belt loop is separate and affixed via a metal ring. Also known as a dangler, the sheath is free to move separately from the belt loop and you. This comes in handy if you’re seated, as the knife can move freely and adjust itself into position yet remain easy to withdraw.

Best Puukko Knives

Today, puukkos have become a popular knife beyond just Scandinavia. In places ranging from El Salvador to Russia and the USA, puukkos are prized for their durability and ruggedness. Below are five of the best puukkos that are available today.

TOPS Tanimboca Puukko

Puukko knives
The 90-degree blade spine on the TOPS Tanimboca Puukko is for use with a fire restarter. Scrape the corner of the blade spine down the ferro rod to create a shower of sparks. (Marty Stanfield Photography)

From TOPS Knives, there is the Tanimboca Puukko. Designed in conjunction with Serbian knifemaker Goran Mihajlovic, who has spent the last two decades living in Colombia, the Tanimboca combines the best of a puukko knife with the toughness of the Amazon.

The blade has a slight clip point at the end and a flat spine is great for fire starting and scraping tasks. The knife is made from 1095 steel with a 56-58 Rockwell hardness and a length of 3.63 inches and a tumbled finish. The Tan Canvas Micarta handle honors the traditional puukko and looks great.

The knife comes with a brown leather sheath and has a belt loop so it’s easy to take with you. A cool, contemporary take on a historic knife makes the Tanimboca work the $170 MSRP.

Benchmade 200 Puukko

Benchmade 200 Puukko
Benchmade 200 Puukko

You know Benchmade is going to put out a good product, and their 200 Puukko is no exception. The drop point is made of CPM-3V steel, the 200 is super hard and super durable even by puukko standards. The rubberized Santoprene handle provides excellent grip, and the lanyard hold in the handle makes the 200 easy to bring with you outdoors or on the job site.

Add in a leather sheath and you have a top-tier knife that can handle any situation you throw at it. With an MSRP of $160 it’s fairly priced and worth every penny.

Ahti Vaara Finnish Puukko Knife

Ahti Vaara Finnish Puukko Knife
Ahti Vaara Finnish Puukko Knife

Direct from Finland comes a budget puukko from Ahti. The Vaara is made from carbon-vanadium alloy steel with a traditional Masur birch handle and brass fittings. The is sharpened with a Scandi grind and is 3.74 inches in length. Overall, the knife is 8.31 inches long and well-weighted.

A neat design element is a black spine made of carbon steel. The flat edge, like with other puuukkos on this list, is great for starting fires and scraping away at material.

With a reasonable MSRP of just $51.45, the Vaara is a well-priced knife, and even with the shipping cost from Europe, it should still be under $100.

Marttini Tundra Kelo

Marttini Tundra Kelo
Marttini Tundra Kelo

Another puukko made in Finland, the Marttini Tundra Kelo is not just a beautiful knife but also a quality one. Unlike most puukkos, which have a narrow tang within a solid wood handle, the Tundra Kelo is a full-tang blade surrounded on either side by a wax-coated gnarl birch handle.

The 4.33-inch blade is longer than most other choices on this list and is made from stainless chromium steel with an HRC 58 in terms of hardness. The black leather sheather contrasts nicely with the look of the knife itself.

The MSRP is € 139, which converts to $146.87 before shipping. One of the pricier knives on our list but worth it if you’re looking for a high-quality authentic Finnish puukko.

Condor Indigenous Puukko Knife

Condor Indigenous Puukko Knife
Condor Indigenous Puukko Knife

The last knife on our list is from Condor and is one of the most visually striking. The Indigenous Puukko Knife has a 3.9-inch blade made of 1095 high carbon steel with a Scandi grind.

The walnut handle features an inlaid golden wire wrap to help with grip, and it looks great. the handle is meant to combine elements from Polynesian and Sami cultures to celebrate indigenous cultures from around the world. The Sami are an indigenous group that lives in northern Norway, Sweden, Finland, and a small portion of Northwest Russia.

The knife comes with a welted leather sheath and is incredibly light at just 4.6 ounces. At an MSRP of just $95.45 this is a well-priced, nimble, and beautiful knife.

GiantMouse Ace Nimbus V2

This folder is inspired by the puukko and other Nordic knives and is built to be a mix of EDC and tool for the jobsite. The 3-inch blade is made from satin-finished Elmax steel meted to a green micarta handle for a secure grip. The blade has a full flat grind and thin edge. This allows for longer, more precise slicing strokes, and since the blade comes to an extremely fine tip the knife is also great for puncturing as well.

The nuts and bolts of this knife are great. The liners are made from AISI 420 hardened steel, and the liner lock keeps everything rigid. At 3.8 ounces it’s both light yet heavy enough to feel good in the hand.

The blade is .138 inches thick. That’s more than fine for many standard tasks around a jobsite but you might not want to start using it as a pry bar if you don’t have to.

MSRP: $185

Kellam Knives Ranger Puukko

This knife is a puukko to its core. It’s designed and built to stand up to not only combat but also the ferocious winters of Northern Europe. The 6-inch blade is made from forged 80CrV2 carbon steel with a teflon coating for added wear resistance and a Scandi grind.

At two-tenths of an inch thick, the blade is a beast and can stand up to almost anything life can throw at it. Use is aided by a 5-inch tempered rubber handle that won’t crack or deform even in hostile conditions.

Th Ranger Puukko is standard issue for troops from both the Finnish and Estonian militaries, and it’s easy to see why.

MSRP: $186.45

Helle Temagami CA

Designed by Les Stroud, the Temagami is a full-tang puukko that was precisely built to be among the best of its type on the market. It starts with a half-full tang design. That means the blade can be seen along the spine of the handle except near the fingers; this is done to better weight the knife and to better withstand harsh conditions.

The curly birch handle looks great and is ergonomically designed for hard, intense work. At 4.34 inches long, the triple laminated carbon steel blade is long enough to be used for slicing, puncturing, and even chopping for food-related tasks. The leather sheath allows for easy transport and storage.

MSRP: $209

Editor’s Note: Mike Abelson contributed to this piece

Read More

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement