Home Fixed Blade Knives Page 16

Fixed Blade Knives

Most popular

Taking The Foot Path: Top Sheepsfoot Knives

Reuben Bolieu
-
0
Taking The Foot Path: Top Sheepsfoot Knives

Three unique sheepsfoot blades for top pocket performance.

A sheepsfoot blade hides its edge behind a quiet profile. It slices clean and never wanders. These three nowhere-near-a-kind blades remind you why the shape keeps earning loyal fans.

Sheepsfoot Advantage

A sheepsfoot blade shape delivers straight, predictable cuts without risk of a piercing tip. The sheepsfoot blade gets its name from its shape, which resembles a sheep’s hoof. The edge runs flat so the user can push through rope, cardboard and fabric with complete control. The dropped, rounded nose keeps the point out of the work, which helps during rescue tasks and close-quarters cutting. The shape shines in utility roles, but it trades away penetration and fine-tip detail work. Users who need a safe, steady cutter reach for a sheepsfoot. Users who need a sharp, probing point usually look elsewhere.

Reiff Knives Circadia

Taking it into the woods, the author found the Reiff Knives Circadian Sheepsfoot performed like a larger knife due to the full-sized handle and wide blade. The perfect tool for both the camp and kitchen.
Taking it into the woods, the author found the Reiff Knives Circadian Sheepsfoot performed like a larger knife due to the full-sized handle and wide blade. The perfect tool for both the camp and kitchen.

Reiff Knives built its reputation on hard-use tools designed for people who work and live outdoors. The Circadian Sheepsfoot fits that mission cleanly. Reiff Knives is a family run and veteran-owned company, and it’s carved out a niche by blending modern steels with field-driven ergonomics. Its knives aren’t showpieces—they’re workhorses built to survive real use in the backcountry, the shop or the boat. The Circadian line has been one of the company’s best sellers, and the sheepsfoot variant pushes the platform into pure utility.

The Circadian Sheepsfoot features a compact EDC profile, measuring roughly 7 inches in overall length, depending on the sheath and scale configuration. The blade measures about 3 inches and is cut from CPM MagnaCut, a steel chosen for its balance of toughness, edge retention and corrosion resistance—a smart match for a knife meant to live outdoors. Reiff offers the blade in stonewash or black DLC, both finishes built for durability and low glare. The 90-degree spine is sharp enough to spark from a ferro rod, adding value for fieldcraft.

Handle scales are available in canvas Micarta, colored black or green depending on the model. The geometry favors control: a deep index cut, a neutral mid-section and a palm swell that locks the hand without forcing a grip. It’s a compact knife that still feels anchored during push cuts, rope work and fine carving.

Reiff pairs the Circadian Sheepsfoot with a Kydex sheath, sold in multiple colors and patterns, including black, OD green and multicam. Reiff designed the sheath for belt or pack-strap carry with enough retention for active movement. It’s an EDC fixed blade—small enough for daily tasks and tough enough for field abuse.

Circadian Sheepsfoot Specs
Overall Length: 7.25”
Blade Length: 3.28”
Blade Thickness: 0.120
Steel: CPM-MagnaCut Stainless
Finish: Stonewash
Weight: 4.10 oz.
Scales: OD Green Canvas Micarta
Sheath: Ambidextrous Universal Kydex with Tek-Lok
Made in the U.S.A.
MSRP: $285

Circadian Performance

Sheepsfoot blades excel in the kitchen, similar to a santoku knife with a flat blade. The Circadian slices with authority, performing pull slices with the tip.
Sheepsfoot blades excel in the kitchen, similar to a santoku knife with a flat blade. The Circadian slices with authority, performing pull slices with the tip.

Even though these three knives are in the EDC realm, the Circadian Sheepsfoot feels like the big brother. I have to give comfort and solidness to it. The knife has the heft to baton wood for the dry parts, and the edge geometry to feather wood like an ordained bushcraft knife. On top of that, the 90-degree spine showered sparks on every part, even the jimping.

It acts like a mini santoku knife in the woods, cabin and home kitchen. It performs draw cuts like a champ on food, cardboard, cordage, paper and leather. I made it my woods sheepsfoot blade and relied on it solo and teamed up with a chopper/splitter in the winter months. I touched up the MagnaCut blade once while testing it, and it wasn’t a chore, because I never let it get dull enough to need the sharpening stone.

I added an UltiClip to the sheath, carried it in my utility pocket and called it good!
The Circadian Sheepsfoot delivers reliable cutting performance for those who need a dependable tool that never falters. It’s simple, rugged and purpose-driven—exactly what Reiff Knives promises with every tool they ship!

Bear & Son Culery Large Sheepfoot Barlow

Bear & Son blends tradition with Alabama craftsmanship in the Large Sheepfoot Barlow, featuring simple mechanics and quality materials. Even living up to modern performance expectations, the author found the stag handle gave it “old-timey” appeal.
Bear & Son blends tradition with Alabama craftsmanship in the Large Sheepfoot Barlow, featuring simple mechanics and quality materials. Even living up to modern performance expectations, the author found the stag handle gave it “old-timey” appeal.

Bear & Son Cutlery operates out of Jacksonville, Alabama, where it machines, grinds, assembles and sharpens every knife under one roof. That full-control approach gives its traditional patterns a level of consistency collectors and working users both appreciate. The Large Sheepfoot Barlow sits squarely in that tradition. It blends a classic American pattern with modern steel choices and multiple handle options, giving the user a pocket tool that feels familiar but performs with modern reliability.

The knife measures 7 inches in overall length and 4 inches closed. Bear & Son fits the frame with a 2.75-inch sheepsfoot blade cut from stainless steel. The second blade mirrors a traditional Barlow layout, providing a backup edge for finer work. The sheepsfoot profile drives straight cuts through rope, cardboard and daily tasks with predictable control. The company shapes the spine with a clean, squared feel, which helps during controlled push cuts and scraping chores.

Handle options include rosewood, Genuine India Stag Bone and white smooth bone. Each material gives the knife a different personality: rosewood for warmth, stag for texture and smooth bone for a classic pocket-worn look. Nickel-silver bolsters anchor the Barlow silhouette and add durability at the pivot.

The knife is a slipjoint, so it stays legal in most jurisdictions and fits the traditional-carry crowd. Bear & Son ships it without a sheath, as expected for a pocket Barlow. The weight lands at 3.7 ounces, which keeps it planted in the pocket without feeling bulky.

2-Blade Barlow Sheepsfoot
Overall Length: 7”
Blade Length: 3”
Closed: 4”
Blade Thickness: 0.90″
Steel: Stainless
Finish: Satin
Weight: 2.9 oz.
Scales: Rosewood, Genuine India Stag Bone, White Smooth Bone
Sheath: None
Made in the U.S.A.
MSRP: $79

Large Sheepfoot Barlow Performance

The Sheepfoot Barlow's large blade cut through leather and nylon webbing easily. Meanwhile, the comfortable, tapered handle made pull slicing smooth.
The Sheepfoot Barlow’s large blade cut through leather and nylon webbing easily. Meanwhile, the comfortable, tapered handle made pull slicing smooth.

The Large Sheepfoot Barlow had some weight and an old-timey impression. It made me feel classy when I used it and it sliced like a champ. Its solid feel was substantial, though I took extra care when pulling the blades out. The liners inside the handles were sharp—near paper-cut sharp. But I didn’t draw blood when I opened it. They were just rough to the touch.

Both blades were wicked sharp. The smaller blade had a more awl-like shape and was thick enough to use as one. Or it could be your up-close, carving-in-tight-places blade. Pick your poison. The main blade excels at slicing rope, and the sharp tip makes short work of leather. What surprised me most was how detailed the sheepsfoot was mincing fresh garlic in the kitchen. Naturally, the stainless steel remained worry-free around moisture.

Bear & Son continues to push traditional patterns forward while keeping the work in Alabama. The Large Sheepfoot Barlow reflects that mission: simple mechanics, honest materials and a pattern that earned its place over generations.

Tactile Knife Co. Redhawk

Kept to the company’s tight tolerances, the Tactile Knife Co. Redhawk is a versatile cutter designed for everyday use—indoors or outdoors. The author found the knife’s design and build quality impeccable.
Kept to the company’s tight tolerances, the Tactile Knife Co. Redhawk is a versatile cutter designed for everyday use—indoors or outdoors. The author found the knife’s design and build quality impeccable.

The Redhawk marks Tactile Knife Co.’s push into the compact fixed-blade EDC space, and it carries the same machining pedigree that put the Dallas-based shop on the map. Tactile started as a precision pen company before expanding into knives, but its through-line never changed: tight tolerances, clean lines and American-made materials. Its shop in Texas machines nearly every component in-house, and the company leans hard into heirloom-grade build quality. The Redhawk reflects that ethos—simple, durable and purpose-driven.

Taylor Martin created the Redhawk after years of carrying fixed blades that fell short. It’s a compact knife punching above its size without feeling delicate. It measures just under 7 inches in overall length (6.9 inches OAL) with a 2.75- or 3-inch blade, depending on the variant. The blade, cut from CPM MagnaCut, is a steel chosen for its balance of toughness, edge retention and corrosion resistance. Its reverse tanto/modified sheepsfoot profile gives it a tall cutting surface and a fine, workable tip. Blade stock runs 0.12-inch, keeping it slicey without feeling thin.

Handle scales are made of Micarta and come in multiple colors. Tactile shaped them with a scalloped pinch-grip area for control during fine work and heavy cuts using a chest-lever grip. Finish options include stonewashed, tumbled Cerakote and black Cerakote, depending on the retailer. The spine is ground clean and crisp, suitable for scraping tinder or striking a ferro rod. Tactile doesn’t explicitly market it as a 90-degree spine, but it behaves like one in use.

The knife ships with either a Kydex or leather sheath, both set up for pocket carry with a clip, making it a true EDC fixed blade rather than a belt-only option.

Redhawk Specs
Designer: Taylor Martin
Overall Length: 6.9”
Blade Length: 2.75”
Blade Thickness: 0.120
Steel: CPM-MagnaCut Stainless
Finish: Cerakote (black)
Weight: 3.16 oz.
Scales: 3D Contoured Micarta Handles (black)
Sheath: Kydex Discreet Carry Concepts Sheath Clip
Made in the U.S.A.
MSRP: $249

Redhawk Performance

The Redhawk was a woods camp breakfast companion during the author’s testing. The sheepsfoot both helped with fire, food prep and eating.
The Redhawk was a woods camp breakfast companion during the author’s testing. The sheepsfoot both helped with fire, food prep and eating.

I first saw the Redhawk in Taylor Martin’s hand at an outdoor event. We talked about it later that evening, and I was eager to get one and put it through the wringer. First stop—the Irish pub to show the guys. After show-and-tell, it was nearing the holiday season and the Redhawk went to work on package duty. Work included heavy plastic strapping, paper and plastic packaging, bubble wrapping and—as little as possible—tape. I hate sticky blades, so usually I cut through cardboard when breaking them down flat. Believe it or not, paper, grass and cardboard are all hard on an edge.

In the woods, the Redhawk made feather sticks for a fire from wet wood and went on to slice ham and sausages. It kept a small bio stove well fed in the colder end of autumn. The blade performed as expected—well! The handle was nimble, yet substantially comfortable. The scalloped grooves in the Micarta scales did their job, especially in chest-lever and pinch grips.

The Redhawk is a compact cutter built for daily tasks, but it carries the machining DNA of a much larger knife. It’s a minimalist tool with maximum intent—exactly what Tactile Knife Co. set out to build.

Closing

The sheepsfoot blade shape shares genetic material with many knives, such as the Malaysian parang, the Japanese santoku knife, rescue knives and Serbian-style cleavers. There’s no escaping this timeless pattern!

Knife Reviews:

Shop Dump: Tom Krein, Jerry Moen, And Ben Breda

Mike Haskew
-
0

Acclaimed Makers Tom Krein, Jerry Moen, And Ben Breda Take Us Into Their Workshops And Show Us How They Turn Steel Into Knives.

For Tom Krein, making the shop comfortable is a big step in being productive and efficient. 

“While it might not be quite what you expect, I consider things like a restroom, central heat and air, and a full kitchen as things that keep me at the shop and productive,” he commented. “I’m often here 12-to-15 hours a day, and having these available makes me comfortable and able to work longer. While it’s probably not something that would immediately come to mind, I consider this setup one of my most useful tools.”

Since Tom’s shop is not at his home, these add-ons make a difference in time and travel. No doubt, the ability to work and then take a quick break improves the quality of his finished knives as well.

When hard at work, Tom utilizes several key pieces of equipment. A variable speed mini mill from Little Machine Shop is a workhorse. 

haas cnc machine
Tom does his CNC work on his HAAS Super Mini Mill.

“I have two of these that are very similar,” he said. “I’ve used these to build many folders. They take a lot more time than a floor model Bridgeport, but they can get the work done. Now that I have the HAAS CNC, I mostly use these for precision drilling, deburring and counterboring.”

While working for long-time custom maker Bob Dozier in 1998, Tom bought a grinder from his employer. 

“I actually got paid to put it together,” he smiled. “I grind on it day in and day out. It wasn’t cheap when I purchased it, but it has never let me down. I’ve literally ground thousands of blades on it.”

Dozier was also influential on another of Tom’s most important shop tools. 

“Bob helped me build a variable speed buffer in 1998, too,” Tom said. “This is another machine that I use on every single knife multiple times. I don’t know how I would make knives without it. It is currently set up with a ¼-inch cardboard wheel on the left-hand side for sharpening and a deburring wheel on the right-hand side.”

Krein knife
Tom Krein gravitates more toward making folders these days, such as his Alpha model. (Whetstone Studio knife image)

Tom has been making custom knives for nearly 30 years, and he is gravitating more toward folders now due to a touch of arthritis in his hands, but continues to make some fixed blades. His signature materials are D2 tool steel—a preference he gleaned from Dozier—and NitroV stainless steel as well. He uses a lot of G-10 and Micarta® for handles along with stabilized koa, stag and mammoth.

Jerry Moen

The day-to-day grind in the custom knifemaker’s shop is typically only as productive as the maker’s tools will allow. Skill, investment of time, and precision in the finished product are heavily influenced by the function and quality of the tools, and what the available equipment will allow.

For veteran knifemaker Jerry Moen, his best offerings from the shop are homegrown to a great extent. After selling a large number of shop tools and pieces of equipment to custom knifemaker and friend Todd Begg a few years ago, he regularly employs his own creations from Moen Tooling.

Moen fixture
The Moen Blade Grinding Fixture includes carbide file guide blade clamps, a rugged anodized coating, friction-free nylon gliding surface, dual handles and adjustable blade standoffs. Jerry demonstrates it here in conjunction with the Turbo Grind Evo3 at BLADE Show Texas 2022.

“I use the basic stuff in my shop when I’m making a knife,” Jerry began, “so there really isn’t anything special about those things. But the platen from Moen Tooling has been a game changer for many makers who have ordered it so far. I can’t thank Princeton Wong enough for his contribution to Moen Tooling, either. Princeton is a brilliant young engineer, and I first realized his talent at the Fort Worth Show when he won best new maker.”

The platen indexes the knife blade and virtually eliminates the problems with belt bumps and heat that go along with other such products. The result is better symmetry and a smoother grind. The grinding process is also cooler, allowing the maker to use finer belts and minimize the bump.

“I’m a user of all the grinding fixtures Jerry has produced,” commented custom maker Tom Overeynder. “Using the new platen and grinding fixtures will greatly jump start new makers as well as old timers in accomplishing more accurate grinds. The user can hog off stock and can do the most delicate jobs. Overall, I love it and highly recommend it to anyone interested in doing top drawer workmanship.”

Moen pairs his platen with two other indispensable pieces of shop equipment. The first is his functional Outlaw grinder, and he believes it is adequate for the jobs at hand. However, he is close to a deal with AmeriBrade to promote its products.

He has also developed the Moen Blade Grinding Fixture, which includes carbide file guide blade clamps, a rugged anodized coating, friction-free nylon gliding surface, dual handles and adjustable blade standoffs. The dovetailed clamps help with transitions and the fixture is well-suited for flat, hollow or small-wheel grinding.

“This fixture takes all the guesswork out of it,” Moen noted. “It’s all indexed perfectly, and you can set angles where you need them. It holds the blade and sets the bevel you put on it, and you can flip it from one side to the other and take it to a 1200-grit finish in 30 minutes.”

Jerry sold Princeton 25 percent of Moen Tooling some time ago, and the two have made an impressive team. 

Jerry Moen knife
Jerry Moen makes fine folders such as this one in a lightning-strike carbon fiber handle and is founder of Moen Tooling. (Eric Eggly/PointSeven knife image)

“He can do CAD and has helped with the design on some of our new stuff,” Moen added. “I might be the one with imagination but I depend on the best people I can find for what I’m short at.”

Custom maker Bob Ohlemann has put the Moen platen and fixture system to work as well. 

“These days, I spend about as much time teaching knifemaking as I do making my own knives,” Bob remarked. “Most of my ‘dress tactical linerlock’ students are established makers looking to expand their skill set and offer new products to their customers. One of the most important techniques students look to learn in my classes is how to create high-precision bevel grinds with beautiful sweeping plunges and reduce their time hand finishing blades. This is where the Moen Tools platen and fixture system excel.”

Ben Breda

American Bladesmith Society Journeyman Smith Ben Breda tackles the forging of custom knives with an array of proven shop tools and equipment. 

He has been forging knives for 10 years and has been full time for six of those, specializing in chef’s knives, hunters , bowies and fighters. He uses premium handle materials such as wood burls, stag and ivory. When fully engaged making knives, Ben has John Perry handle broaches nearby. 

“These are a must for properly fitting hidden-tang handles,” he explained. “They are very well built and make fitting handles effortless.”

handle broaches
Ben said his John Perry handle broaches are a must for properly fitting hidden-tang handles.

Ben’s variable-speed-head Bridgeport milling machine is in continual use, and for good reason. 

“This machine allows the maker to fit guards quickly and accurately, which is a must in any knife shop,” he commented. “This machine was a Craigslist find and similar machines often come up for sale. They are pretty easy to find.”

Pounding away at a piece of steel is part of the process for Ben, and he depends on a 50-pound Little Giant Power Hammer to get the job done. 

Ben Bread Bowie
Ben Breda counts such majestic bowies as this one among his specialties.

“With this old mechanical hammer, the maker can break down large steel stock and damascus billets and forge blades with ease,” Ben noted. “I bought this hammer from a retired knifemaker and had it shipped to my shop.”

Ben identifies the Wuertz TW90 belt grinder as another of the most important tools in his shop. 

“Blades can be ground to very precise dimensions with this,” he related, “as well as hardware shaping and, of course, sculpting knife handles. The machine can be used at slow speeds for wood and high speeds for grinding steel away fast. It comes with several attachments as well as a horizontal option, making it a very versatile machine. These grinders can be bought directly from the Wuertz machine company.”

Read More

Nessmuk Knife: Options In The All-American Outdoor Knife

Reuben Bolieu
-
0
Nessmuk Knife: Options In The All-American Outdoor Knife

History repeats itself in modern renditions of an all-American classic.

Some patterns stand the test of time and become legendary for a reason, be it a story, movie or book. The Nessmuk-style knife stands out because of its shape.

Nessmuk was the pen name of George Washington Sears, a 19th-century American writer, conservationist and outdoorsman. He wrote about his wilderness adventures, particularly his solo canoe trips in the Adirondacks, a picturesque mountain range in northeastern New York state. He promoted a simple and lightweight approach to camping and woodcraft.

A modern “Nessmuk Trinity” with a Helm Forge hatchet, Victorinox camper, and TOPS Knives Camp Creek.
A modern “Nessmuk Trinity” with a Helm Forge hatchet, Victorinox camper, and TOPS Knives Camp Creek. Nessmuk would be proud of this edged-tool setup.

According to the story, the Nessmuk knife was named after a childhood friend of Sears’s from the American Indian community. The knife was not well documented and very little is known about it except for a diagram in Sears’s book Woodcraft and Camping. The book describes the knife as “thin in the blade, and handy for skinning, cutting meat, or eating with.”

What Is A Nessmuk

The Nessmuk-style knife has a unique shape that sets it apart from other models. The 4-to-5-inch blade has a hump on the spine that is closer to the point. The blade also has a deep belly and an upswept point, which makes it ideal for slicing, skinning and similar tasks. The distinct blade shape is the defining feature of a Nessmuk-style knife.

George Washington Sears, aka Nessmuk, preferred thin knives with keen edges. He paired his knife with a double-bit hatchet and a folding knife, forming his “trinity” of cutting tools.

Nuge Camptoku, TOPS Knives Camp Creek, Bear Forest Knives PuuMuk and KA-BAR/Becker BK-19 Nessmuk knives.
The Nessmuk-type knife is a highly regarded design. The test versions are, from top: Knives By Nuge Camptoku, TOPS Knives Camp Creek, Bear Forest Knives PuuMuk and KA-BAR/Becker BK-19.

Usually, a Nessmuk blade is carbon steel ranging from 3/32 to 1/8 inch at the thickest. The handle comes in a variety of materials, including wood, bone or antler depending on availability and user preference. It is important for the handle to be comfortable and ergonomic, fitting the hand well.

What Makes A Good Nessmuk

A Nessmuk knife is a fixed blade Sears designed and used for his expeditions. It has a distinctive curved blade that resembles a skinner or a butcher knife and a handle that fits comfortably in the hand.

A quality Nessmuk knife should be able to perform various tasks in the woods, such as skinning game, slicing meat, carving wood, making feather sticks, cutting cord—even shaving. It should be sharp, sturdy, well balanced and easy to maintain. A Nessmuk knife should also be lightweight and compact so as not to add much bulk or weight.

TOPS Knives Camp Creek

Camp Creek combines all the features of a superior hunting knife with impeccable fit and finish
The Camp Creek combines all the features of a superior hunting knife with impeccable fit and finish. It sliced camp food and passed the tomato test with flying colors.

The TOPS Knives Camp Creek is a hunting/camping knife designed by Leo Espinoza, company president. The blade is CPM S35VN steel, which boasts superior edge retention and stainless properties. The handle is a three-color camo-style G-10.

The Nessmuk-like design is perfect for hunting, skinning, processing wood and food prep around the campsite. The knife has a contemporary tan Kydex sheath and a brown leather dangler on a swivel.

Camp-style kabobs were my focus with the Camp Creek due to its classic butcher knife shape. I knew it would excel slicing meat and veggies and it didn’t disappoint. It aced the tomato-slicing test and will see more dirt time in the future.

Definitely the most Nessmuk shaped of the review knives, the super-sharp, flat-ground blade has all the right curves and excels at food prep and woodcraft.

Camp Creek Specs
Designer: Leo Espinoza
Blade Length: 4.38”
Blade Steel: CPM S35VN stainless
Blade Grind: Flat
Blade @ Thickest: .13”
Blade Finish: Tumble
Handle Material: Camo G-10
Overall Length: 9”
Sheath: Coyote tan Kydex and leather
Country of origin: USA
MSRP: $305

Bear Forest Knives PuuMuk

Eating off the Nessmuk hump
The author ate off the Nessmuk hump of the PuuMuk, perhaps the way Nessmuk himself did a century-and-a-half ago.

Made by Bear Forest Knives (BFK), the PuuMuk combines the design elements of a puukko and a Nessmuk-style knife. It has a straight handle without a guard and a choice of blade grinds: high saber or Scandi. The knife features full-tang construction. The blade was sharp as can be, especially the Scandi version.

The handle is like all the knives I have used from BFK—comfort is not compromised in any way. The red oak scales are secure and comfortable in any grip.

I used the PuuMuk as I would a general camp knife. I improvised carving a fork out of wood and general woodcraft like making feather sticks for a fire. The PuuMuk prepared food outdoors, slicing bacon, tomatoes, avocados and peppers. I used it as an impromptu spoon to eat off the back of the Nessmuk blade hump; perhaps Sears did the same. I used the PuuMuk for one month straight in the kitchen, doing all a kitchen knife would typically do. It didn’t take much time before the steel took on a respectable patina, adding to the look of the old-timey pattern.

The knife’s standout feature is the thin Scandi-ground blade and sharp 90-degree spine, adding a modern improvement to the classic pattern.

PuuMuk Specs
Blade Length: 3.75”
Blade Material: 80CrV2 carbon steel
Blade Grinds: Scandi and high saber options
Blade @ Thickest: 3/32”
Blade Finish: Acid wash
Knife to know: The blade’s 90-degree spine accommodates ferro rod striking and tinder scraping
Handle Material: Red oak
Overall Length: 8.375”
Sheath: JRE Industries brown leather
Country of origin: USA
MSRP: $179.99

KA-BAR Becker BK-19

BD-19 Trap
In survival Nessmuk mode, the author made a figure-four trap with the BK-19 in a jiffy.

The KA-BAR Becker BK-19 is a solid tool battened down with stainless steel Torx hardware and comes with a MOLLE-compatible, bulletproof Celcon sheath. Designed by Ethan Becker of Becker Knife & Tool, the 9.6-ounce edged tool stands out with the beloved Nessmuk blade shape so highly regarded in the bushcraft community.

The blade has more of a drop-point look than the other three test models. It is a survival Nessmuk if ever there was one. I put the knife into the deep end, splitting wood via a stout baton and crafting a figure-four deadfall trap. The robust blade easily split timber and processed wood for a late winter fire.

The handle was comfortable in several grips, and the exposed tang pommel added another degree of usefulness among the bunch, standing out as the hard-use survival Nessmuk the likes of which Mr. Sears would be proud.

The standout feature of this compact powerhouse is the sheath, which can be worn on a belt or in a scout carry orientation. The belt loop webbing is removable, and the retention is so good that the snap closure at the top is unnecessary. However, the closure can come in handy when in transit. KA-BAR has figured it out for you with two drain holes to help keep the sheathed blade dry in wet conditions.

BK-19 Specs
Designer: Ethan Becker
Blade Length: 4.3125”
Blade Material: 1095 Cro-Van carbon steel
Blade Grind: Flat
Blade @ Thickest: .165”
Blade Finish: Burnt bronze
Handle Material: Ultramid synthetic
Overall Length: 9.125”
Sheath: Celcon
Country of origin: USA
MSRP: $165.38

Camptoku Knives By Nuge

Camptoku Nessmuk
The Camptoku has a sharpened 90-degree section at the front of the spine, allowing the author to ignite some tinder with a ferro rod quickly.

The Camptoku from Knives By Nuge is a versatile general-purpose camp knife blending the esteemed Nessmuk blade with a santoku pattern, resulting in a rugged tool for outdoor and meal tasks. The Nitro-V stainless steel blade offers excellent durability and easy maintenance. The Camptoku comes with G-10 or wood scales and a custom-made slip sheath (no belt loop).

It is the longest of the bunch and a bit of a divergence from the traditional Nessy. However, it pays homage to the revered design and moves it into a new era. The thin blade screams kitchen use and allows for a comfortable chef’s pinch grip with a rounded spine for comfort. Meanwhile, the front 1.5-inch section from the Nessmuk hump to the tip has a sharp 90-degree spine for striking a ferro rod or scraping tinder.

The handle is a generous 4.75 inches, making it suitable for kitchen and woodcraft grips. Incredibly comfortable in a fist handhold, the knife is a chameleon when put into service in a chest-lever or pinch grip. The G-10 liners and pins offer that dash of undeniable modern class.

In the field the Camptoku served as the ordained kitchen knife, slicing tomatoes, meat and vegetables for stew while also starting fires to cook what it had been used to prepare.

Camptoku Specs
Blade Length: 5.5”
Blade Steel: Nitro-V stainless
Blade Grind: Saber
Blade @ Thickest: 3/32”
Blade Finish: Satin
Knife to know: The blade has a 90-degree spine in a 1.5” section from the hump to the tip for ferro rod striking and tinder scraping
Handle Material: Choice of G-10 or maple burl
Overall Length: 10.5”
Sheath: Kydex
Country of origin: USA
MSRP: $425

Dime Novel Knives?

George Washington “Nessmuk” Sears spoke ill of the bowie- and hunting-style knives of his era (mid-to-late 19th century), writing of them, “The ‘bowies’ and ‘hunting knives’ usually kept on sale are thick, clumsy affairs, with a sort of ridge along the middle of the blade, murderous-looking, but of little use; rather fitted to adorn a dime novel or the belt of ‘Billy the Kid’ than the outfit of the hunter.”

Here To Stay

The Nessmuk knife is a versatile and practical tool that can easily handle various outdoor tasks. The pattern has become crucial to American cutlery history and shows no signs of going away. Here’s hoping it never does.

Check Out More Outdoor Knives:

New Knives June 2025

BLADE Staff
-
0
New Knives June 2025

Summer Steel: June’s Hottest Custom and Production Knives You Need to Know.

From mosaic fighters to modern flippers, this month’s standout blades bring a mix of artistic craftsmanship and everyday utility. Whether you’re in the market for a hand-forged Damascus showpiece or a no-nonsense EDC, June’s lineup has something sharp for every collector and user. Here’s a closer look at what’s turning heads in the knife world this month.

Miguel Navarro Fixed Blade

Miguel Navarro Fixed Blade

Blade length: 4.25”
Blade material: Diamond Damascus by Baker Forge & Tool
Blade grind: Hollow
Scales: Fat Carbon Gold Snake w/black and red G-10 liners
Weight: 7.4 ozs.
Overall length: 9”
Maker’s price for a similar knife (includes custom sheath): $550-$600
Maker: Miguel Navarro (SharpByCoop image)

Dale Holt Mosaic Fighter

Dale Holt Mosaic Fighter

Blade length: 10”
Blade materials: 1084 carbon and 15N20 nickel alloy steels
Blade grind: Flat
Blade pattern: Clip-point recurve
Handle material: Spalted sassafrass
Spacers: Textured brass and nickel silver
Guard: Blued mild steel
Knife to know: Design features include an S-guard and dropped handle; Dale Holt is an ABS journeyman smith
Overall length: 15”
Maker’s price for a similar model: Contact maker for details
Maker: Dale Holt (Jocelyn Frasier image)

Kelly Frasier Paring Knife

Kelly Frasier Paring Knife

Kelly Frasier Paring Knife
Blade length: 3.5”
Blade material: 26C3 carbon steel
Blade grind: Flat
Blade finish: Mustard patina
Scales: G-10 w/red liners
Overall length: 7.5”
Maker’s price for a similar model: Contact maker for details
Maker: Kelly Frasier (Jocelyn Frasier image)

Sam Renwick Farmer’s Lockback

Sam Renwick Farmer’s Lockback

Knife type: Folder
Blade length: 2.78”
Blade steel: Nitro-V stainless
Blade grind: Flat
Blade @thickest: .98”
Scales: Spalted maple
Frame & bolsters: 416 stainless
Knife to know: The bolsters are dovetailed
Weight: 5.3 ozs.
Closed length: 3.38”
Maker’s price for a similar knife: $291 at press-time rate of exchange
Maker: Sam Renwick (Rod Hoare image)

Bjorn Jacobsen Ghost Recon Chef

Bjorn Jacobsen Ghost Recon Chef

Blade length: 7.87”
Blade material: 1084 (the black core) laminated w/stainless steel etched
Blade grind: Flat w/forged texture on top half
Blade @thickest: .118”
Blade @widest: 1.97”
Handle: Curly birch dyed w/black leather dye and sanded w/600 grit paper, then sanded mostly off again at 1500 grit, blue leather dyed and sanded w/1500 grit yet again; finished w/Uncle Bjorn’s Handle Finish
Fittings: Stainless
Weight: 6 ozs.
Overall length: 12.6”
Knife to know: Blade etched in ferric chloride to make the carbon migration “pop,” then left in instant coffee overnight to make the 1084 core black
Maker’s price for a similar knife: $320 at press-time exchange rate
Maker: Bjorn Jacobsen (Rod Hoare image)

Rob Wayman Knives Feather Damascus Fighter

Rob Wayman Knives Feather Damascus Fighter

Blade length: 8”
Blade material: Feather damascus of 1084 carbon and 15N20 nickel-alloy steels
Blade grind: Full flat
Handle materials: Stabilized bog oak, black G-10 and stainless steel spacers, dyed/stabilized fossilized brain coral, and stabilized curly narra
Guard & pommel: Feather damascus
Overall length: 13.75”
Sheath: By Rob Wayman; belt model of vegetable-tanned leather w/stingray inlay
Maker’s price for a similar knife and sheath: $2,400
Maker’s remark: “I’m all about sole authorship, so I make all my own steel and keep everything in house.”
Maker: Rob Wayman Knives (SharpByCoop image)

Shining Blades: From the Aldo and Edda Lorenzi Collection

Shining Blades: From the Aldo and Edda Lorenzi Collection

Authors: Aldo and Edda Lorenzi
Format: Hardcover, 9 x 9.75 inches
Pages: 344, including 280 in color
Publication date: May 27, 2025
Publisher: Silvana Editoriale
Content: BLADE Magazine Cutlery Hall-of-Fame® members, the authors operated the G. Lorenzi retail knife shop in Milan, Italy, from 1959 to 2014. To stock their store and to add to their collection, they traveled far and wide in search of all manner of knives, scissors, razors, corkscrews and other edged tools. They acquired over 2,000 pieces from the Etruscan period to the present, many incredible specimens of which are illustrated in their book—including those by some of the most famous custom knifemakers of all time—along with the stories of how the Lorenzis obtained the pieces, met the makers and much more. A must read for true knife and edged tool aficionados, both present and future alike.
List price: $50
Order: artbooks.com

Bear & Son Cutlery Lawman

Bear & Son Cutlery Lawman

Bear & Son Cutlery Lawman
Knife type: EDC folder
Blade length: 3.25”
Blade material: D2 tool steel
Rockwell hardness: 59-61 HRC
Blade grind: Taper
Blade finish: Polished
Blade opener: Thumb stud
Pivot: Ball-bearing washers
Scales: White smooth bone
Bolsters: Carbon fiber
Lock: Slidelock
Pocket clip: Blade tip up
Weight: 3.5 ozs.
Closed length: 4 3/8”
City & state of origin: Jacksonville, Alabama
MSRP: $119.99
Company: Bear & Son Cutlery

APOC Wallace Bowie

APOC Wallace Bowie

Designer: Mike Wallace
Blade length: 9 5/8”
Blade material: D2 tool steel
Blade thickness @guard & tip: .256” & .039”
Blade finish: Titanium coat
Slabs: G-10
Knife to know: Handle screws accept a size T9 Torx or star bit; any other bit used may strip the screws
Weight: 1 lb., 5 ozs.
Overall length: 15 1/8”
Sheath: Kydex, vertical or horizontal carry, MOLLE compatible
Country of origin: China
MSRP: $117
Company: APOC

CIVIVI Clingman

CIVIVI Clingman

Designer: Taylor Martin
Knife type: Flipper folder
Blade length: 2.99”
Blade steel: Nitro-V stainless
Rockwell hardness: 58-60 HRC
Blade grind: Hollow
Blade @thickest: .12”
Blade finish: Black stonewashed
Pivot: Caged ceramic ball bearings
Lock: Linerlock
Scales: Black G-10
Handle @thickest: .47”
Liners: Stainless steel
Pocket clip: 6Al4V titanium; ambidextrous, tip up
Weight: 2.8 ozs.
Country of origin: China
MSRP: $71.70
Company: CIVIVI

Boker Plus LRF G10

Boker Plus LRF G10

Knife type: Flipper folder
Designer: Japanese knifemaker Kansei Matsuno
Blade length: 3.07”
Blade steel: VG-10 stainless
Blade @thickest: .075”
Pivot: Ball bearings
Scales: G-10
Lock: Linerlock
Weight: 1.94 ozs.
Closed length: 4”
Continent of origin: Asia
MSRP: $108.69 at press-time exchange rate
Company: Boker Plus

Jack Wolf Knives The Benny Fat Carbon Arctic Storm

Jack Wolf Knives The Benny Fat Carbon Arctic Storm

Knife type: Slipjoint
Pattern: Lanny’s Clip
Blade length: 3.25”
Blade steel: CPM S90V stainless
Rockwell hardness: 60-61 HRC
Blade grind: Hollow
Blade finish: Belt satin
Blade @thickest: .12”
Lock: Framelock/bolster lock
Pivot: Ceramic bearings
Scales: Fat Carbon Arctic Storm
Bolsters: 6Al/4V dark-blasted titanium
Pocket clip: Titanium anodized a light blue
Knife to know: A pocket-clip recess plug provides clipless carry option
Weight: 3.5 ozs.
Country of origin: China
MSRP: $279.99
Company: Jack Wolf Knives

Check Out Other Months:

U.S. Military Daggers: Blades That Have Taken Point

Mike Haskew
-
1
U.S. Military Daggers: Blades That Have Taken Point

Daggers have struck home the U.S. military’s point from the trenches of Europe to the jungles of Vietnam.

Through the years, the military dagger has been considered an essential piece of equipment for the soldier on the ground and the pilot in the air. As a second line of defense, the dagger must be accessible and capable of quick deployment, not to mention efficient at its job.
As U.S. military personnel have gone into action, their choice of daggers provides a window into their operational history and a view of their actual aptitude when seconds count. Design and dexterity are hallmarks of dagger use in the heat of a life-and-death situation, and these storied weapons of war have gained their place in the annals of close combat.

“A good friend of mine was a chopper pilot in Vietnam,” recalled BLADE® Magazine field editor Kim Breed. “The pilots carried the Gerber MK II upside down on their flight vests. When he was shot down, he and his crew chief went through their ammo; then they drew their daggers while they waited for pickup. They locked onto the enemy, rammed them through the side [with their daggers] and hung on. Then they took [the enemy’s] AK-47s away from them and got back into the fight. They defended themselves while Cobra gunships laid down suppressing fire and a rescue bird, a Huey, came and got them.”

Kim’s comrades might well have been killed in the melee had they not had their Gerber Mk II daggers when needed. Designed by Clarence “Bud” Holzmann, the knife gained legendary status during the Vietnam War, and though it was not standard issue, the Gerber Mk II was popular with U.S. troops—from airmen to special forces and everything in between. The wasp-waisted blade of the original remains a symbol of the close combat sometimes experienced in Southeast Asia, while its intimidation factor led to a redesign for the consumer market.

Later variants of the MK II included saw teeth, a feature added by Al Mar, who worked at Gerber at the time. This allowed the company to market it as a survival knife, not a fighting knife. Sporting goods stores and PXs were more likely to sell the latter. (Les George image)
Later variants of the MK II included saw teeth, a feature added by Al Mar, who worked at Gerber at the time. This allowed the company to market it as a survival knife, not a fighting knife. Sporting goods stores and PXs were more likely to sell the latter. (Les George image)

“It was designed the same as the [original] Mk II except it had serrations on both sides. The serrations might be considered a weak point,” Breed explained. “They had cast aluminum handles and a little thinner blade with that wasp waist. When you actually penetrated something, [the waist] helped along with a bit of extra weight up front.”

While the original Mk II may have been a stronger choice back in the day, the serrated Mk II is also a sought-after collectible. A knifemaker, Kim relates some owners have asked him to grind the serrations completely off this Gerber dagger. He declined to do so.
One more story Kim recounts is of a friend who found himself in hand-to-hand combat during a recon deployment in Vietnam. A Viet Cong patrol was walking past, and the last man in their line spotted the Americans in their cover. “Rather than alerting the whole enemy patrol, my friend took the last man down and used his knife,” said Breed.

Regarding the Mk II, knifemaker Les George added, “Al Mar was a designer at Gerber at the time and he added ‘saw teeth’ to the blade to make it a survival knife. The PX was happy to sell it as such since they didn’t want to sell a ‘fighting knife.’”

A great many modern military daggers trace their roots back to the legendary English Fairbairn-Sykes dagger. The one pictured is a third-pattern variant with a ring grip. (Les George image)
A great many modern military daggers trace their roots back to the legendary English Fairbairn-Sykes dagger. The one pictured is a third-pattern variant with a ring grip. (Les George image)

Industry veteran Bill Harsey also tells a story of combat survival with the Gerber Mk II in Vietnam. “I heard from a Medal of Honor recipient over dinner that his team was overrun by enemy combatants. In close-quarter combat, he drew his knife and stuck it in an enemy soldier. The knife stuck. Even with both hands he couldn’t withdraw it. I have no idea why the knife stuck and he didn’t offer any thoughts. But just to be careful, we have never made a wasp-waisted blade.”

Fairbairn-Sykes And Beyond

The Randall Knives Model 2 Fighting Stiletto bears the name of one of the most famous knifemakers in history and was developed as a robust alternative to the legendary Fairbairn-Sykes dagger. Randall has gone to war with several memorable designs, and according to Breed, the Model 2 is one of the best remembered.

“The blade is a little wider than the well-known Fairbairn-Sykes dagger,” said Kim. “The Randall was more handle-heavy, with only about a 5-inch blade, as I remember. It feels good in the hand. The guard is not sharp on the fingers, which was a challenge with some of the others. Any Randall daggers are collectible, just like Randalls in general. They didn’t make many of them. The Model 2, to me, is a cross between the Fairbairn-Sykes and the V-42 with a leather stack handle.”

The Randall Knives Model 2 bears the name of one of the most famous knifemakers in history—Bo Randall—and was developed as a robust alternative to the legendary Fairbairn-Sykes dagger. (Les George image)
The Randall Knives Model 2 bears the name of one of the most famous knifemakers in history—Bo Randall—and was developed as a robust alternative to the legendary Fairbairn-Sykes dagger. (Les George image)

The Marine Raider Stiletto remains a classic weapon of the World War II era, and it is said to have been the first Marine knife in the Corps’ history designed by a Marine, designed by Lieutenant Colonel Clifford H. Shuey. The story goes that this dagger was developed because the elite Raiders specifically requested a knife for close fighting.

Les offered some observations concerning the Marine Raider stiletto’s proper mission. “When the Marines were issued the Raider Stiletto in World War II, they had been specifically told not to pry with them or throw them,” he said. “So, obviously, they threw them at the first tree they could find and broke the tips off many of those knives.

“I think the Marine Raider Stiletto has the best handle design of all the many knives derived from the Fairbairn-Sykes daggers,” George continued. “It’s not just round. It has features and a shape allowing the blade to be indexed by feel. But the blade is very thin, the tip was fragile and the metal that they cast the handles out of reacts with air. They are all disintegrating. Eventually, we will lose them all.”

Knifemaker and military dagger aficionado Les George is a fan of the Marine Raider stiletto, seen by his collection of the dagger—new and old. (Les George image)
Knifemaker and military dagger aficionado Les George is a fan of the Marine Raider stiletto, seen by his collection of the dagger—new and old. (Les George image)

The handle of the Camillus-made Marine Raider Stiletto was fashioned with a die-cast zinc alloy, while the 7- to 7 ½-inch blade was made of blued or bright steel. The overall feel of the stiletto was hilt-heavy for optimal balance.

“The Marine Raider Stiletto has probably the smallest group of collectors since it primarily appeals to Marines,” commented George. “The rest can be categorized in different ways and have broader appeal. These knives and their more modern counterparts may not find their way to the battlefield as a matter of course, but the history they represent is invaluable.”

Knuckled Under

Les includes the iconic M1918 trench knife among those favored few military daggers carried in wartime by American soldiers. Its design was based on the French M1916 Avenger, and the military held field trials after initial 1917 and early 1918 variants were found inadequate. The M1918 was first made by Landers, Frary & Clark, a housewares and hardware company, production was later increased with Oneida, Henry Disston & Sons and the French manufacturer Au Lion.

George considers the knife's handle the best designed of all the Fairbairn-Sykes derivatives. Unfortunately, this is also the dagger’s weak point as the metal used for the handle reacts with the air and disintegrates. (Les George image)
George considers the knife’s handle the best designed of all the Fairbairn-Sykes derivatives. Unfortunately, this is also the dagger’s weak point as the metal used for the handle reacts with the air and disintegrates. (Les George image)

“The LF&C M1918 trench knife did not see action in World War I,” George explains. “It was made for that war, but it ended before the knives made it to Europe. A lot of them were melted down to reuse the handle material. When the Japanese attacked Pearl Harbor, they were the only knives in the system available to be issued to Marines … The M1918 saw use in World War II, Korea and Vietnam. I’m not aware of any combat use of the knife since then, but it is possible.”

The M1918 is distinctive with its integrated cast brass handle and brass knuckle grip designed for close combat, along with small spikes on the finger bows and a skull crusher pommel. The medium carbon steel blade has been criticized at times for being brittle, but nevertheless the knife is recognized as formidable in a hand-to-hand brawl.

“The M1918 was designed to be an effective tool for close fighting,” observed Breed. “With a positive grip and the brass knuckle guard, you didn’t have to stab, or you could hit your opponent with the skull crusher. There were dozens of confirmed kills with this dagger. It was not recommended to dig with them because they were prone to breakage or ‘bendage.’ You could drive that big brass handle into the dirt, but that half shaft that came down from the blade was short on steel and weakened the knife around the tang.”
The eye appeal of the M1918 makes the dagger collectible. “It’s pretty popular and one of the iconic knives of its type,” Kim concluded.

Many think of the M1918 as the quintessential World War I trench knife, though the variant didn't see action in that conflict, adopted too late. Based on the French M1916 Avenger, it was meant to replace the 1917 and early 1918 variants, which were found inadequate. (Les George image)
Many think of the M1918 as the quintessential World War I trench knife, though the variant didn’t see action in that conflict, adopted too late. Based on the French M1916 Avenger, it was meant to replace the 1917 and early 1918 variants, which were found inadequate. (Les George image)

Representative of the fighting men who carried them into harm’s way, these U.S. military daggers of the 20th century continue to fascinate with their double-edge blade, balanced feel and handle characteristics. Their place in history is secure, while collectors and knife industry veterans are doing their best to preserve and retell the stories that surround them.

More On Military Knives:

Best M9 Bayonet Options For The Civilian Enthusiast

Mike Ableson
-
0

On a rifle or in close quarters, the M9 Bayonet has kept its edge for nearly 30 years.

The M9 bayonet was first issued by the United States Army in 1986. It partially replaced the M7, which was first issued during the Vietnam War. The M9 is slightly longer than the M7 and has been manufactured by multiple different makers including Buck and Ontario Knife Company. The M9 has a bigger, thicker blade than the M7, and some versions come with serrations.

The M9 is compatible with the M16 series of rifles as well as the M4 carbine. It’s also a high-quality fighting and utility knife, and, unlike many other bayonets, the M9 can also be fitted to a shotgun. In this case, specifically the Mossburg 590.

The M9 is used by multiple militaries and some police forces throughout the world from the armed forces of Singapore and Thailand to the Netherlands army and the security forces in Abu Dhabi. 

Can I Buy An M9 Bayonet Today?

Yes, you absolutely can buy an M9. 

Ontario Knife Company still makes the bayonet for commercial sale, and several other companies make versions of the knife. It’s important to remember that you need to keep your local knife laws in mind before buying an M9. 

States and countries may ban the ownership and carry of the knife, most time due to the length of its blade. However, it oftentimes also gets the switchblade treatment and is classified as a “dangerous knife”–a vague and ominous distinction meant to scare old ladies and small children.

Ontario Knife Company M9

Ontario Knife Company has been making knives in New York State since the late 19th century. During that time, the company has become a regular maker of arms for the United States Armed Forces.

The OKC M9 is a beautiful knife. The clip point is just over 7-inches long and made from 420M steel. The thermoplastic nylon handle provides excellent grip without adding too much weight, and the nylon sheath keeps everything secured.

This is a knife that looks and feels like it’s ready for anything. It shines through its simplicity with quality construction. It’s easy to see why the U.S. military continues to issue the OKC M9 today.

MSRP: $223.75

Snake Eye Tactical M9 Bayonet

This M9 from Snake Eye Tactical is vastly different from the OKC version in numerous ways. Combined with its sheath, this M9 is more multi-tool than the Ontario version.

The 8-inch stainless blade has a large fuller made from stainless steel. The majority of the spine is a sawback blade to provide more versatility to the knife, namely the ability to saw through thick wood. The sheath has a built-in sharpening stone, and a section of it can be used as both a flathead screwdriver and a wire cutter.

Yes, it’s an M9 but this piece can be used for much more than a traditional bayonet. It’s also much less money than the OKC variety, so if you’re interested in the M9 this is a great entry point.

MSRP: $39.95

Read More

Cool Customs: Damascus Gentleman’s Hunter

BLADE Staff
-
0

Brandon Hyner’s First Knife Is One Of His Most Current Knives As His New Work Takes Inspiration From His First Blade

Sometimes things take their own sweet time before coming to fruition. Such is the case with Brandon Hyner’s damascus gentleman’s hunter.

Hyner is an accomplished maker. He is a champion of History Channel’s Forged in Fire and has built a business of knifemaking and blacksmithing in his shop in Groton, on the Connecticut coast of Long Island Sound. He has built a following of just over 9,000 followers on Instagram where he showcases his work and produces behind the scenes videos in his shop of him doing everything from welding to forging by hand. 

The damascus gentleman’s hunter is the second of a design Brandon made when he first started blacksmithing and knifemaking. With the help of a Texas bladesmith, he forged a damascus billet for the first knife, and “was forever grateful” for the opportunity. Four years later Brandon decided to finish the knife and was very pleased with how it turned out. As he noted, “I decided to keep the blade as is, as it was a big milestone knife for me.”

It has a six-inch blade with a desert ironwood handle. The brass spacer and carbon fiber bolster complete the look. 

He posted the knife online and someone asked to buy it. However, rather than sell it, Brandon made a similar knife instead. “The second knife came out much better than the first one,” he noted, “but I’m extremely happy with them both.”

It’s a matched pair he can always point to as proof of his maturation as a maker and a beginning of possibly greater things to come. It was a four-year odyssey well worth the wait.

Damascus Gentleman’s Hunter Knife Specs

Knife name: Damascus gentleman’s hunter

Blade length: 6 inches

Blade material: Low-layer twist damascus

Handle: Desert ironwood w/brass spacer

Bolster: Carbon fiber

Overall length: 10 inches

For more information contact Brandon Hyner, Dept. BL4, 852 Bank St., New London, CT 06320 631-742-7227 [email protected].

Read More

1...151617...19Page 16 of 19
Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

Wayne Goddard -
  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
forged in fire knifemaking tv show

8 Things You May Not Know About “Forged in Fire”

how to forge damascus steel

How to Forge Damascus

James Huse ordered a custom sheath by No Surrender Holsters for his BBQ knife.

How to Create Damascus Patterns

Why Are Switchblades Illegal?

Advertisement
Advertisement
BladeMag.com
Facebook Instagram Pinterest X