Fixed Blade Knives Archives

Recurve Knives: Top Options In These Curvy Carvers

-

July 1, 2024

Recurve Knives: Top Options In These Curvy Carvers

The sexy shape of three U.S.-made recurve blades addresses both performance and aesthetics.

As blade patterns go, the recurve is right up there in the “flair department.”

Just as the curves of a Ferrari add irresistible styling to the classic sports car’s appearance*, so does the curvature of a blade’s edge add to that of the look of the knife. It also changes the geometry of a blade—sometimes radically—in some ways better and other ways not so much. That’s the beauty of blade design and why there are so many different styles from which to choose.

How much length does a recurve add to the edge of a blade? This chart compares the length of the ’Squatch blade to the length of the actual sharpened edge. The curved top edge blade of a straight blade might add 2-to-3 inches to the edge. The Sasquatch’s recurved edge stretches the increase to 4.75 inches.

The waisted recurve design shifts the weight of the blade toward the tip, which while excellent for chopping also reduces the blade’s effective chopping length. The recessed area on the lower part of the recurved blade adds the benefit of being able to trap or gather in its subject when performing chores like debarking and taking slivers from wood, but it also makes sharpening more difficult with flat-surfaced media such as whetstones.

Sharpening A Recurve

Like any blade design, there are trade-offs. To get an idea of how radically the recurve lengthens the edge of a blade, see the accompanying chart of the Case Sasquatch bowie. The height of the sharpened portion of the blade is 7.5 inches, but when the length of the curvature is factored in the number swells to 12.25 inches!

Recurve blades require a rounded or ovate sharpening medium to properly hone the curvaceous edge. Hand-held sharpeners similar to those used by chefs or the common V-sharpeners work well on curved edges, as do stones with curved edges such as the Spyderco Golden Stone ceramic.

When sharpening these blades the concave lower curve does not conform to a flat plane, so an ovate or rounded surface grit is required for sharpening. Fortunately, there are plenty of these to choose from, such as handheld sharpeners similar to those used by chefs or the common V-sharpeners that use alternating rods set at opposing angles in a base. The Spyderco Golden Stone and/or Webfoot works as well. Now, on to the recurves!

Bear Forest Knives Custom Recurve

The Bear Forest Knives Custom Recurve is a small fixed blade built like a tank, owing much to the 3/16-inch thickness of its acid-dipped 52100 carbon steel blade. At 7.75 inches overall, the knife is geared toward light-to-medium camp chores and could conceivably be used as an EDC. The full-tang handle boasts colorful scales of a wavy sandwich of black, orange and natural cross-cut canvas Micarta®. Weight is a hefty-for-its-size 5 ounces. Bear Forest provides a black Kydex sheath with a nifty black coated 2.25-inch spring steel belt clip.

Bear Forest Knives Custom Recurve Specs
Blade length: 3.25”
Blade material: 52100 carbon steel
Handle material: Crosscut canvas Micarta®
Gripping feature: Tri-color Micarta handle material
Sheath: Black Kydex w/belt clip
Weight: 5 ozs.
Overall length: 7.75”
Country of origin: USA
MSRP: $249

Recurves shine when performing shaving tasks. Both the TOPS (left) and Case (right) did a nice job rendering cedar curls for fire starter.

Case Laramy Miller Sasquatch Bowie

The Case Laramy Miller Sasquatch Bowie is a study in understated good taste. The large 13-inch Jim Bowie namesake flows from stem to stern, from the break in its flat-ground 1095 carbon steel blade to its rounded combo lanyard hole and pommel. The matte-black Caswell finish gives the bowie a rustic look. The bag-style handle is topped with natural canvas Micarta scales affixed with 5/16-inch brass pins. Case provides a double-stitched natural leather belt sheath that matches the knife in clean styling.

Case Laramy Miller Sasquatch Bowie Specs
Blade length: 7.75”
Blade material: 1095 carbon steel
Handle material: Natural canvas Micarta®
Cutter keys: Clip-point blade, Caswell finish
Sheath: Natural leather belt model
Weight: 14.5 ozs.
Overall length: 13”
Country of origin: USA
MSRP: $219.99

TOPS Longhorn Bowie

The TOPS Longhorn Bowie is a thoroughly modern recurve with such classic touches as its upswept clip-point blade—always welcome on a bowie. The flat-ground 1095 blade is coated in dark sniper gray Cerakote®, matching the gray/black layered linen Micarta scales nicely. The black nylon MOLLE-compatible sheath carries on a belt or a pack and other gear. It includes a front pouch for stowing a sharpener or fire-starting accessories.

TOPS Longhorn Bowie/Sniper Gray Specs
Blade length: 6.75”
Blade material: 1095 carbon steel
Handle material: Canvas Micarta®
Cutter keys: Trailing-point blade, sniper gray Cerakote® finish
Sheath: Black nylon, MOLLE compatible w/pouch
Weight: 18.1 ozs.
Overall length: 13”
Country of origin: USA
MSRP: $305

Testing The Recurve Knives

The TOPS Longhorn and Case Sasquatch bowies begged to be reviewed together because they are exactly the same length and share the same 1095 blade steel, yet are two very different knives. The TOPS blade has a more casual recurve while the Case is full tilt. The handles couldn’t be more different as well, with the Case opting for a clean, traditional bag-style grip while TOPS chose a modern tactical design a full inch longer than its counterpart, resulting in a slightly shorter blade. Let the fun begin!

The Bear Forest Custom Recurve is small compared to the two larger test knives, though the same blade geometry applies. Note how the upper curve of the edge ensnares the rappelling rope as it slices through it.

I started with some basic chopping on a 5-inch diameter oak log. The Sasquatch brought the hammer down with its weighted fore-end but the Longhorn had the advantage of more working area on the blade for chopping. Both manufacturers chose 1095 and have loads of experience at maximizing the steel’s benefits. I found both knives excelled in the pure blade bite and performed well chopping. The Sasquatch weighted front end is an advantage for sheer power but the Longhorn is 3.6 ounces heavier, so it closes the gap significantly.

I did some shaving doing push cuts on 1×3 cedar planks. As expected, the concave edge of the Case excelled at trapping the wood through the straight cuts. Advantage Sasquatch. However, the TOPS has a grip a full 1-inch longer than the ’Squatch and is textured as well, offering superb purchase. Advantage TOPS. Bottom line, both recurve bowies performed very well. The choice is yours.

It's a trap! The lower concave area of the Case blade traps the rappelling rope during a pull-through. The deeper the concave curve, the better it performs this function. — It’s a trap! The lower concave area of the Case blade traps the rappelling rope during a pull-through. The deeper the concave curve, the better it performs this function.

The sheaths for both are well done. The Case belt model is natural leather designed in a simple, tasteful manner. The TOPS is unabashedly rock ’em, sock ’em tactical all the way.

The Bear Forest Custom Recurve punches up in its size class thanks to thick 3/16-inch blade steel and a healthy handle length, a trait often missing on smaller fixed blades. I tested the blade for its ability to capture 3/8-inch rappelling rope in its concave maw. Thanks to its overbuilt steel, the blade never wavered while producing slice after slice. It also took off nice, healthy curls of cedar just like the big boys. The curves of the cross-cut canvas Micarta scales made for excellent purchase and are attractive to boot. I also did some bark skinning on seasoned oak, took slices off other kinds of rope, and batonned fatwood pine fire starter.

Bear Forest provides a nifty Kydex sheath. It has a 1.5-inch spring clip on the back that not only mounts on the belt for vertical and cross-draw carry/deployment, but doubles as a pocket clip on either side, something seen more and more from the fixed-blade EDC crowd lately. All in all, I was impressed with the whole package.

Final Cut

The recurve isn’t just for whacking stuff. It requires a little more finesse and is typical of blades that don’t walk the straight and narrow. However, the benefits of recurves will reward you dearly when kept in their lane. All three of the test candidates performed admirably and are well worth your consideration.

*Editor’s note: Long-time custom knife purveyor J. W. Denton, who was a champion racecar driver in his younger days, was fond of comparing the knives of Steve Johnson, BLADE Magazine Cutlery Hall-of-Fame member Bob Loveless and others to curvaceous sports cars. J. W.’s comparison, however, was largely between the handle butts of the knives and the rear ends of the cars. However, both comparisons are accurate.

Bear Forest Knives Custom Recurve
Blade length: 3.25”
Blade material: 52100 carbon steel
Handle material: Crosscut canvas Micarta®
Gripping feature: Tri-color Micarta handle material
Sheath: Black Kydex w/belt clip
Weight: 5 ozs.
Overall length: 7.75”
Country of origin: USA
MSRP: $249

Check Out More Outdoor Knives:

BEST TOMAHAWKS: OUR TOP HAWKS FOR BACKWOODS TO BATTLEFIELDS
BEST BUSHCRAFT KNIFE: WHEN STEEL MEETS THE WOODS
BEST EDC FIXED BLADE KNIFE: A CUT ABOVE THE REST
BEST CAMP KNIVES: OUTDOORS DO-ALLS

Hunting Knives: Field Fixed Blades Made For Grunt Work

Dexter Ewing

-

September 17, 2025

0

Hunting Knives: Field Fixed Blades Made For Grunt Work

Hunting knives should be workhorses and these options are ready to shoulder the load as you take to the field.

Fixed-blade hunting knives are the workhorses of your hunting gear. They handle a lot of the grunt work associated with cutting, including field dressing game after the take-down to various cutting tasks while hunting or in camp. As a result, it is important to choose a hunter that not only has the features and the materials you want but one that fits your budget as well.

Hogue Knives Extrak

Despite the thin nature of the Extrak’s handle, slightly expanded front and rear sections help form a guard of sorts to avoid gripping difficulties.

With its slender form, the Hogue Knives Extrak takes a minimalist approach to fixed hunters. Hogue President Jim Bruhns designed it to be lightweight and agile. Available in two sizes, the Extrak and its bigger brother, the Extrak XL, both tackle heavy field-dress work while offering comfortable carry minus the bulk of many fixed hunters.

The modified clip-point blade is 3.3 inches of high-performance CPM MagnaCut stainless steel in a stonewashed finish. The peel-ply orange G-10 scales are textured enough so the material is a bit grabby. The orange fits right in with the hunter theme. Despite the handle’s thin nature, slightly expanded front and rear sections help form a guard of sorts to avoid gripping difficulties. Overall length: 7.375 inches.

Thanks to the thin blade stock and full, flat primary grind, think of this knife as a scalpel. Scalpels have lean handles but the blades are thin enough to cut easily with very little applied force. Same thing with the Extrak. The blade bites into meat so easily that the slender handle doesn’t matter.

At first I was a bit apprehensive that the thin grip would affect the knife’s use. The more I cut with the Extrak, the more I saw that the thin blade is where the work takes place. It slices so cleanly and efficiently that you need not apply pressure on the handle to make the cut. After a while, the lean grip doesn’t matter because you are too busy admiring the knife for its extreme cutting power and efficiency. From sausages, steaks and veggies to cardboard and opening mail, the Extrak dispatches all with aplomb. It’s a great candidate for your next restaurant outing. It is a very low-profile design that won’t attract unwanted attention in public, even with its bright orange handle.

The Hogue Extrak might be a lightweight and thin fixed blade but don’t let that fool you. Cutting performance wise, this knife punches above its class. The thin blade cuts like a scalpel.

The Extrak also makes a great utility knife. However, shy away from rough use and any sort of cutting where you simultaneously twist the blade. MagnaCut is a tough steel but as thin as the knife is, you can damage the edge or break the tip if you use it too hard. It is a precise cutting tool. I rate the knife high on the list for an EDC fixed blade as well.

Due to the knife’s minimalist design, it might be possible to custom fabricate a Kydex neck sheath for it to wear under a shirt for more discreet carry. Don’t try it with the supplied slip cover as there isn’t enough tension to hold the blade securely for such neck carry. The molded ABS plastic sheath features an UltiClip fastener. The setup enables you to carry the knife clipped to the top of a pants pocket, much as you would a tactical folder. The knife rides securely in this manner, with the entire handle sticking out for easy deployment. The sheath is simple but works and is of pretty good quality. Country of origin: USA. MSRP: $199.95.

Spartan Blades Harsey Nessmuk

The skinner-like blade of the Spartan Harsey Nessmuk excels at slicing tasks.

The Spartan Blades Harsey Nessmuk is the largest knife of the test group. The classic Nessmuk design with its distinctive bulbous tip has proven to be a very effective outdoor knife that excels at many tasks, from field dressing to camp utility chores. The skinner-esque blade is a highly effective slicer. Do an internet search for George Washington Sears and the Nessmuk blade style. The history of how the design came about is a rather interesting read and gives some insight as to why the blade is shaped as it is.

In the Spartan entry, the Nessmuk blade is paired with the handle design of BLADE Magazine Cutlery Hall-of-Fame® member Bill Harsey. The Creswell, Oregon, knifemaker is widely known for his tough fixed-blade designs for the Special Forces and his work with Cutlery Hall of Famers Col. Rex Applegate and Al Mar. The Nessmuk is yet another Harsey design for Spartan that includes the pair’s tactical and other outdoor collaborations. It is part of Spartan’s Silver Line, aka Professional Line, a mid-priced/made-in-the-USA (KA-BAR factory in upstate New York) series that is less expensive than the company’s flagship Gold Line.

The Nessmuk blade is 5⅛ inches of flat-ground 1095 CRO-VAN carbon steel with a Rockwell hardness of 56-58 HRC. The 1095 offers a great balance of edge retention and ease of sharpening without the need of a complicated sharpener. At .1875-inch at the thickest and with a corrosion-resistant/low-glare black powder coat, the blade is well-equipped for high-performance outdoor work.

As the author noted, one of the hallmarks of a true Bill Harsey design is the handle. “His handle designs are among the best in the industry,” the author observed. “They are contoured to fit your hand like a glove, without any hot spots.” Handle features also prevent forward or backward sliding of the hand, while the 3D texturing adds enough grip to be secure but not aggressive.

The rugged, molded thermoplastic sheath has a fabric-fastener loop to attach to a wide range of belt sizes. A thumb-retention lock holds the knife in place and three slits vent water, making it ideal for wet environments.

The handle is Grivory, an impact and fluid-resistant material that can be molded with various contours and chamfers that aid in attaining a comfortable, secure grip. The durable/usable handle feels as if it were molded to your hand and has no hot spots. At 10.8 ounces and 10 inches overall, the Spartan Harsey Nessmuk is big yet lightweight enough to tackle most any hunting knife chore you throw its way. MSRP: $225.

Fallkniven F1L3GMM Next Generation

The convex-ground blade of the Fallkniven powers easily through most any medium. According to the author, “it is one of the sharpest cutting edges out there.”

The Fallkniven F1L3GMM Next Generation fixed blade was designed as a pilot survival knife but is also a knockout crossover fixed hunter. The blade boasts a laser etching of the JAS 39 Gripen Next Generation Swedish fighter jet, but don’t let that fool you. The Fallkniven entry actually has a hunting knife pedigree.

As the company website notes, the work of BLADE Magazine Cutlery Hall-of-Fame® member Bob Loveless was the inspiration for the F1L3GMM. You can almost see it in the knife’s lines. The 3.9-inch drop-point blade has plenty of belly to facilitate slicing chores. The maroon Micarta® handle is very elegant and sports the right contours to accommodate your hand, and is very comfortable to hold with no worry of hot spots. The nickel-silver guard fits the tang seamlessly and is a great anchor point to prevent your hand from sliding forward. The handle fastens to the tang with a pair of Corby bolts, and a gold medallion with three crowns decorates the grip’s center. At 8.2 inches overall, the F1L3GMM is sized just right for a hunter. The sewn black leather belt sheath sports quality construction, and the “F1”-stamped flap closure with button snap conceals the entire knife.

The Fallkniven entry is a hard-use beast. The blade slices very cleanly and expediently. If you’ve never used a knife with a full convex edge, you are definitely in for a treat. Fallkniven is known for convex edges that are both sharp and quite durable, not to mention easier to maintain due to the geometry. The convex edge bites in deep and hard, and you can use it a tad rough as well without fear of the edge chipping out. It is also very well suited for general use around camp or the kitchen. The blade is fairly thick but, due to the convex edge, dives into whatever is being cut and propels the rest of the blade through. Just because it’s thick doesn’t mean it cannot slice effectively. This is a knife of heirloom quality that also has plenty of horsepower for getting real work done.

Maroon Micarta® is the handle material of choice for the Fallkniven F1L3GMM fixed hunter. It is pinned to the tang using Corby rivets.

The handle is comfortable, rounded and contoured in the right places and devoid of hot spots during extended use. I have always been a big fan of Micarta® for both folder and fixed-blade handles. It’s pretty much the ultimate user material given its light weight, dimensional stability and imperviousness to most known liquids. Plus, it comes in a wide array of colors, and the maroon adds a nice splash of color without being overly flashy. You don’t see too many maroon-handled knives, so this one is a breath of fresh air.

Yes, it is on the pricey side for a production hunter but in return you get a very well-built cutter executed with the best materials. I don’t think you can find a better knife for the money. If you love European engineering and manufacturing, this is the hunter for you. Country of origin: Sweden. MSRP: $499.99.

Hunting Knives:

Best Custom Hunting Knives: Is There A Consensus?
Custom Forged Hunting Knives: Full Spectrum Of Options
Hunting Knives: What Makes The Perfect Blade Geometry?
Best Skinner Knives: A Guide to Top-Rated Hunting Blades

Military Knives: Veteran-Designed & Military-Inspired Steel

Dexter Ewing

-

July 23, 2026

0

Military Knives: Veteran-Designed & Military-Inspired Steel

These veteran-designed or manufactured knives are ready to serve.

A rare combination, military knives aren’t simply utilitarian tools; they stir something deep inside of us. Whether an inborn call of duty or a profound respect for those who served, edged implements meant for battle call to knife aficionados with a patriotic streak. Which, simply put, makes them wildly hot in the eyes of manufacturers and collectors alike.

Not all military knives are issued. Some of the most storied were picked up as “just in case” purchases at post PXs or sporting goods stores throughout the years. This doesn’t make them any less ready to serve. And, today, there are a slew of options engineered or built by veterans, meant for action—in the field of battle and for everyday protection and chores—and more than able to cut muster.

Winkler Knives Operator

Originally founded to produce specialized breaching tools at the request of the SOF community, Winkler Knives of Blowing Rock, North Carolina, is certainly no stranger to tactical knives. Their Operator series offers a unique design that is a crossover of sorts. Yes, it was designed as a tactical knife, yet has proven popular as both a camp, general outdoor and hunting knife.

Designed by former Navy SEAL Kevin Holland, the Operator features a 4⅛-inch-long clip-point blade made of 80CrV2 tool steel and given a black oxide coating for rust protection. This steel is an excellent choice for a multi-use knife as it is resistant to impact and holds an edge reasonably well. When it’s time to resharpen, most are pleasantly surprised by how quickly the edge comes back with basic manual sharpening equipment. Given that the blade tapers to a sharp point, it excels as both a weapon and a tool. It has excellent penetration qualities and the thick stock, combined with a flat grind, allows the blade to slice with little resistance.

The Operator’s handle is very well designed, facilitating an excellent grip—a rarity on many compact fixed blades. A subtle finger groove helps index your grip and a flare at the butt and slight downward turn secures the hand from sliding backwards. All the edges on the grip are rounded for maximum comfort and the Operator certainly feels good in hand. I evaluated the antique maple-finished handle for this review. Other materials are available, including Micarta. As to the wood version, it feels warm in the hand, secure and the grain gives a nod to being like a fine furniture.

The Winkler Knives Operator isn't afraid to tackle delicate cutting tasks. It easily sliced Styrofoam packing peanuts, a testament to how well the blade is engineered with its distal taper spine, full height flat grind and razor-sharp factory edge. — The Winkler Knives Operator isn’t afraid to tackle delicate cutting tasks. It easily sliced Styrofoam packing peanuts, a testament to how well the blade is engineered with its distal taper spine, full height flat grind and razor-sharp factory edge.

Standard with the Operator is a formed leather sheath, designed and made by DeSantis Gunhide, specially for Winkler Knives. It has a set screw to control the tension on the knife so you can customize the retention—a nice touch, not often offered. As for carry, there is a fold-over metal belt loop affixed with two screws, facilitating traditional outside-the-waistband and pocket carry. The latter leaves the handle sticking out for quick access.

Overall, I love how the handle feels in-hand with the contouring of the facets making it lie in your grip as if it were made for it. I found the Operator’s slender yet robust build allows it to tackle heavy cutting chores without the unnecessary bulk. It also carries well in the pocket or on the belt.

Operator Specs
Blade Length: 4.125″
Overall Length: 9″
Blade Steel: 80CrV2
Blade Profile: Drop Point
Handle: Maple
Sheath: Leather-Covered Kydex
MSRP: $350
Country of Origin: U.S.A.

Stroup Knives HM1

The HM1 from Stroup Knives showcases a prominent clip point blade and a sweeping cutting edge. Both help it excel in either defensive or conventional chores. As a bonus, the tip of the blade is so acute it tackles precise cutting chores with ease.

Based in Fayetteville, North Carolina, Stroup Knives specializes in tactical and utility fixed blades. Company founder Chris Stroup is an Army veteran with 11 years of service to our country. His final assignment was with a special missions unit based out of Fort Bragg. Medically discharged in 2020, Stroup Knives was born, and in 2022, Stroup made the decision to go full-time into knifemaking.

Stroup Knives’ latest knife, the HM1, represents a multi-use fixed blade for utility, tactical and outdoor use. The design’s focus is on retention, control and high utility. The blade of the HM1 is 4 inches in length and made of 1095 carbon steel with a black stonewashed finish. The clip-point shape gives the blade its distinct bowie-like profile. Honestly, the tip on this one is flat-out wicked! It’s pointy and will penetrate softer materials easily.

The knife sports a distinct machined texturing, making it easily recognizable as a Stroup; a lot of the company’s knives have this distinguishing pattern. Proportional to the blade, the handle also measures 4 inches and has several features making the HM1 noteworthy. Most prominent is the finger ring. The ring provides a measure of security and retention by allowing you to lock your grip in place through it with your pinky finger. Further, the feature makes dropping the knife, even by accident, difficult.

Stroup uses G-10 for the handle, and it sports a 3D-sculpted pattern to aid hand traction. Each HM1 comes with a fold-over Kydex sheath with Teklok attachment. The setup is Spartan, but hey, this style of sheath is widely used in the industry and it always works well. It locks the knife in place and there isn’t any rattling. The belt attachment is solid and is easy to put on and take off without removing your belt.

Made from 1095 carbon steel, the HM1’s blade is simple to maintain and take a wicked edge. Double-walled cardboard melted like butter under the knife’s edge.

The HM1 can function as both a backup weapon and a utility tool. The blade profile is not only excellent at puncturing, but also is fine enough at the tip for precise cutting or scoring tasks. The knife’s 1095 carbon steel is widely praised—it sharpens quickly and it is less expensive than all of the high-performance CPM stainless steels.

I appreciate the dual role the HM1 plays. The knife seems well thought out as an edged weapon and an EDC tool. The HM1 is available in two black acid wash blade finishes (one with black G-10 handles, the other with OD green G-10 handles) and two Cerakote blades (FDE and OD green G-10 and black with black G-10 handles).

HM1 Specs
Blade Length: 3.75″
Overall Length: 8″
Blade Steel: 1095
Blade Profile: Clip Point
Handle: G10
Sheath: Kydex
MSRP: $270
Country of Origin: U.S.A.

Spartan Blades Spartan Harsey Dagger

The Spartan Harsey Dagger’s handle has a lot going on with a distinctive oval profile that lies in the palm naturally and makes the edge easy to index—even in low-light environments.

Spartan Blades, founded by retired Green Berets Curtis Iovito and Mark Carey, has earned a strong reputation for high-end factory-made tactical fixed blades. Several of those knives were designed in collaboration with Bill Harsey, a well-known knifemaker who specializes in custom tactical fixed blades that are on the next level. Harsey’s impressive background includes knife work for the late legendary Col. Rex Applegate, prototyping the Applegate-Fairbairn fighting knife.

The Spartan Harsey Dagger takes what Harsey learned from working with Col. Applegate and applies it to modern-day production tactical fixed blades. It is a modernized version of the Fairbairn-Sykes, if you will. It has an upgraded handle design, upgraded materials and a beefier build overall, yet still retains the design hallmarks of the legendary F-S.

The dagger has a 6-inch-long double-edge blade, hollow ground from premium CPM MagnaCut steel. A black DLC coating is applied for low reflectivity, as well as boosting the corrosion-resistant properties of MagnaCut. The knife also has some notable features like a long, tapered flat section in the middle of the blade for lateral strength and the hollow ground bevels, thinning the edge for a sharper blade.

The handle is where the magic begins and what sets the Spartan Harsey Dagger apart from the rest. The finger recesses behind the guard help to index your grip and lock it in your hand. The recesses have traction notches in them, not only for a non-slip grip but also for tactile cutting edge orientation. The way the handle flares out toward the butt of the handle catches your pinky to prevent rearward sliding and aids in references a clean grip to clear the blade from its sheath. The Spartan Harsey Dagger has a hidden tang design with the Micarta scales fully encapsulating it. There is a bit exposed at the very end of the handle for use as a non-lethal striker. The double hand guard is angled away from the user a bit to provide a comfortable thumb rest.

The Spartan dagger is made from thicker stock, even so, the hollow-ground bevels and a needle point, the knife punches cleanly and quickly.

Each Spartan Harsey Dagger comes with a Kydex carry sheath with MOLLE-compatible straps. The sheath locks on the double guard and provides a very secure fit with zero rattle or any other movement.

Keep in mind a knife like the Harsey Dagger is not a box cutter or a utility knife. If you need a working knife, look elsewhere. It is likely best served, away from the military, as a backup weapon to a firearm. The blade is engineered to penetrate and it’s frightening how adept it is at its job.

One thing most folks agree upon, the Harsey oozes sexiness, with its curvaceous handle and no-nonsense blade. It is a looker for sure, but it can also perform when called upon. The Spartan Harsey Dagger comes in two colors—the black blade and black Micarta handle, as evaluated here, along with an FDE blade and black Micarta handle.

Spartan Harsey Dagger Specs
Blade Length: 6″
Overall Length: 10.75″
Blade Steel: CPM MagnaCut
Blade Profile: Dagger
Handle: Canvas Micarta
Sheath: Lined Nylon MOLLE
MSRP: $475
Country of Origin: U.S.A.

CRKT Xolotl Automatic

The points at the ends of the CRKT Xolotl OTF handle not only add visual style but also allow the knife to be used as a non-lethal defense striking tool when the blade is retracted into the handle.

The Xolotl (Show-low-tol) Automatic is CRKT’s second OTF auto in the company’s lineup. The double-action was designed by Michael Rodriguez, a former Green Beret and veteran. It is named for the Aztec god of lightning and fire.

The overall look of the Xolotl Automatic is symmetrical in both handle and blade shape. In turn, it is very pleasing to the eye. The blade is 3.5 inches and is a true dagger, sharpened on both sides. CRKT’s steel of choice is CPM MagnaCut—pretty much the perfect high-end blade material, if there ever was one.

The handle is machined from T6 6061 aluminum alloy, and its thickness is kept to a minimum so that the Xolotl carries well in the pocket. It also features circular machined grooves for enhanced grip retention. Interestingly, there are 21 grooves, one for each year of Rodriguez’s service. The handle ends up tapering to stylized points of sorts, adding intrigue to the overall look by possibly providing a non-lethal method of striking defense. A deep carry pocket clip rounds out the entire package, allowing the Xolotl to ride undercover. A sliding switch on the handle spine controls the blade’s movement, which is very swift and secure.

The thinner blade stock on the CRKT Xolotl OTF allows for great penetration. Additionally, its MagnaCut steel holds an edge like nobody’s business and is highly corrosion resistant.

Dagger blade OTF’s are very cool-looking, and they are fun to own. But they are limited in providing a full functional cutting tool. By this, I mean that given the material removed to form a dagger profile, it is more susceptible to damage by torque. Further, dual edges mean you can’t use a digit to exert more latitudinal force in a cut or more control. Yet, the dagger does have the advantage of two cutting edges, so if you damage one, you have the other.

All this being said, the Xolotl is a capable cutter, opening mail, packages, cutting up cardboard boxes and anything else that you need to slice. I would not subject the knife to hard use of any kind, given its thinner blade.

Xolotl Specs
Blade Length: 3.5″
Overall Length: 8.88″
Blade Steel: CPM MagnaCut
Blade Profile: Spear
Handle: Aluminum
Country of Origin: U.S.A.

Military Knives:

What U.S. Military Members Look for in a Knife
Combat Legacy: Modern Military Knives
Military Knives: Soldiers’ EDC From The Past 50 Years
U.S. Made Military Knives And Makers

Six Fixed Blades Ready To Go To Work

Josh Wayner

-

October 20, 2022

0

A Good Work Knife Is Worth Its Weight In Gold. These Half-Dozen Blades All Excel At Something Outdoors From Gardening To Felling Trees.

Serious work knives are going to be fixed blades. Strength is something that can’t be sacrificed, and while many folders are incredibly rigid, they have mechanisms and moving parts that can and do become worn or damaged with hard use.

Modern folders are great knives. However, once mud, grit, sand, and the unexpected rock an inch underground comes into play, they tend to fail. Few folders are strong enough long-term for use as a trowel—fewer still can be safely batonned through wood. On the merit of ergonomics alone, the folder is usually slab-sided in profile and isn’t comfortable to hold for long periods, nor does it allow for easy cleaning. As such, the fixed blade is superior when the woodchips or dirt need to fly.

Defining work knives is merited by the individual task at hand. Some of the knives featured herein are not suitable to assume the role of another. Specialization is the name of the game and the knife you need for splitting wood is far different than one for working the ground. The main characteristic, across the board, is that these knives simply must hold up for their intended role and be at least serviceable in others should the need arise.

The test knives were all put to heavy use during an exterior cleanup, pulling up rotten posts, planting vegetables and bulbs, cutting down saplings and small trees, starting fires, making kindling, opening fertilizer and feed bags, and all sorts of things you would use a knife for in routine outdoor chores. They were exposed to rain, soil and, on occasion, cleaning supplies. I evaluated the edges and finishes for how well they cut and the handles for how well they felt in the hand after extended use.

Case Winkler Recurve Utility No. 6

The Case No. 6 was perfect for slicing straps on hay bales, removing small limbs and cutting various hoses and line.

A collaboration between Case and Winkler Knives, the Case Winkler Recurve Utility No. 6 is large, beefy, well-made, and very, very sharp. It arrived with a much finer edge than most Winkler designs, which made it all the more interesting when compared to the other Winkler knife in this article.

One of this issue’s cover knives, the No. 6 is not machete size but is big and heavily built. The deep belly and recurve result in a wide, rounded curve up to the tip, with about an inch-and-a-half of front-facing edge to the point. It is excellent at digging but not great at penetrating materials.

Where the knife really excels is in deep, long cuts. The recurve shape and handle angle make it want to sink right in. It can be batonned through wood around 2.5 inches in diameter with ease, can make tinder and is great at striking. The knife comes with a leather sheath that includes a polymer clip for a Zippo mini lighter. This is probably the only downside to this overall fantastic knife—the polymer clip isn’t strong enough to keep the lighter firmly in place and it can and does fall out.

In terms of general utility, I used the No. 6 hard and heavily for just about every task I could think of in the yard/garden. It chops well for a standard-sized knife and takes down medium branches as well as a small saw. It wants to work and, due to its shape, is simply useful and never got into a place where it was too much or too little. Overall, it is a fantastic work knife that should last you a lifetime.

MSRP: $430.99

Winkler Knives Drop Point Crusher

As a medium chore cutter, the Winkler Drop Point Crusher was great and easy to carry. The glass breaker/striker pommel is wickedly effective.

A classically styled working knife, the Winkler Knives Drop Point Crusher is a rugged gentleman’s knife with an appearance that doesn’t immediately give away its abilities. It was the only test knife with a wood grip but this never became an issue despite it being the most organic in composition. It was, like the others, exposed to rain, sap, dirt and dried wood. In addition, and thanks to the glass breaker/striker pommel, it was also used to bust down rotten posts and break glass out of a damaged windowpane.

It is a lightweight knife and easy to carry all day long. While Winkler makes knives for some of the most tactical dudes in the world, this one doesn’t draw that sort of attention in the slightest. It looks old, like something your granddad may have carried while hunting, and most people just look past it.

As an heirloom-quality knife it is hard to want to use it, but like all the Winkler blades I have looked at over the years, it wears nicely and simply gains character. For basic work the knife is great at everything but is just a bit thin for heavy batonning, though it can be used to split smaller pieces.

As a work tool, it is firmly in the everyday use category but like the Earth Skills knife is best set aside for heavy work. This is the knife I ended up wearing the most and using for the greatest number of tasks as it was so effortless to carry.

MSRP: $375

Condor Tool & Knife Woodbuster

The Condor Tool & Knife Woodbuster is the biggest knife I’ve tested for BLADE®. Because of the knife’s name, I decided it best to use it on as much wood as possible, from taking down branches to dropping small trees. Designed by Joe Flowers, it sailed through things like they were hardly there. It approaches machete size, though it is heavy and the energy you need to get it moving is wasted on small brush.

I chopped firewood and reduced sections of trunk 12 inches wide into firewood with the Woodbuster. It can be batonned with surety and is great in that it has no real tip, so you don’t risk catching your hand or fingers if the blade sticks in the wood. It chops as well or better than a camp axe and with less physical effort in preparing firewood.

In taking down trees care is needed, but it is as good as an axe on anything under a foot across, which isn’t small by any stretch. The Woodbuster is 100 percent a working knife and is easy to become proficient with.

The only downside is the grip, which is rather round in profile. Smaller hands may have a hard time with it. The grip is also a bit smooth, though not all that noticeable if you wear work gloves. It becomes a bit hard to hold when wet and can roll in the hand after repeated strikes. This isn’t a serious problem, just something to be aware of.

MSRP: $171.58

KA-BAR Jarosz Camp Turok

The Camp Turok is a large knife that can handle branches, cutting chores, and light chopping.

The KA-BAR Jarosz Camp Turok is large but not as beefy as the Woodbuster, and much lighter. With the exception of heavy wood cutting and batonning, it performs most outdoor tasks. The blade is thick but draws to a relatively fine point.

Designed by Jesse Jarosz, the Turok is a great general-purpose outdoor tool in that it’s easily maintained and stays sharp when handling chores. It’s a bit too large for EDC and is, like the Woodbuster, something you will want to carry until you don’t; it’s an overt item.

It is, however, the test tool that has the most utility for the price and the broadest range of uses. The only thing I don’t like is the grip—too smooth for my taste and slippery when wet. However, the scales are removable, making the knife easy to clean and maintain.

MSRP: $129.69

Benchmade 162 Bushcrafter

The handy Benchmade 162 Bushcrafter is eminently useful for most outdoor work, and easy to carry and maintain. Designed by Shane Sibert, it arrived with a very sharp edge, though more notable was the grip profile. It’s a relatively small knife and the handle is unusually shaped, almost like a dog bone in geometry, and is very easy to get a firm, solid grip on. It can’t really be used for chopping large materials but is exceptional for fine work. It’s great at making fire and excellent in the garden and for pruning.

While billed as a bushcraft blade, it’s really a fine everyday knife and graciously civilian in appearance. It doesn’t look tactical at all and won’t draw attention anywhere from the farmer’s market to the barnyard. It held up exceptionally well and maintained a sharp edge in use.

It was used like the others to open feed and fertilizer bags and to cut cord and roots. The only downside is the sheath. While aesthetically pleasing, it has a suede feel and once wet tends to stay wet for a long time.

MSRP: $260

TOPS Knives Earth Skills Knife

The Earth Skills knife was at home in the garden and far more effective than a trowel at getting though tough roots.

The Earth Skills Knife from TOPS Knives is large and has a very atypical profile. Matt Graham designed it as a type of survival knife, though not necessarily a heavy-duty one. It is quite thin and has a generous Scandi grind, making it absolutely wonderful for working the earth, cutting through rooted soil to plant new bulbs or vegetables, and light work like cutting branches and digging up old wire netting. It’s great as a close work tool and for preparing food but has little value for hard-use tasks.

The edge geometry and thin spine are not suitable for batonning, though the blade is great scraping tinder and striking on a rod. Because of these special features, the knife is at home in the garden or camp in that it likely won’t be used for initial setup, but rather for cutting food, root vegetables, harvesting forage and as a light machete. The grip is very comfortable but quite large. The blade stayed very sharp through testing and accomplished tasks easily with minimal wear.

MSRP: $260

Read More

All-Access Axes
Camp Knives: All-Purpose Performers
Best Hunting Knife Kits

Outdoor Edge Pivot: Light, Nimble And Affordable

Elwood Shelton

-

July 12, 2023

0

Outdoor Edge Pivot: Light, Nimble And Affordable

Oh, the Outdoor Edge Pivot is a budget option, but not one without its charms.

Traditionally outdoor focused—hence the name—Outdoor Edge has crept into other knife niches. Perhaps it’s a directive from the powers on high at Revo Brand Group (think Real Avid), who acquired the knife company in 2022. Or perhaps it’s because you can only make so many gut hooks and replaceable-blade caping knives. In either case, the company has come out with some intriguing EDC designs that are definitely budget options, but ones that get the job done.

Its most recent unveiling is the lightweight, skeletonized handled Pivot. For most knife enthusiasts, it’s difficult not to like what Outdoor Edge has offered up in the redesign of the company’s Le Hawk and Le Duck knives —particularly its price. A cool $30 ($29.99) puts the fixed blade on your beltline, giving you an edged tool you can treat like a rented mule and not shed any tears if a rough task delivers a coup de gras. Everybody needs one of those to pry away at rusty latches and strip spools of copper wire.

Pivot’s Steel

Constructed from 8Cr13Mov stainless steel, the knife was likely birthed in China—it’s one of the country’s budget stainless options. While inexpensive, the steel generally acquits itself well in wear and corrosion resistance but maybe doesn’t earn top honors in hardness (57 HRC) and edge retention. Though, 8Cr13Mov is known to be pretty forgiving in sharpening, so its edge is quickly regained. Outdoor Edge gives the Pivot’s blade an extra barrier to environmental factors with what it calls its Blackstone Coating, which also gives the knife a dark appeal.

Blade Profiles

The company offers two blade styles on the model, a drop-point and Wharncliffe both virtually the same length. The drop-point measures in at 2.5 inches, and the Wharncliffe is another .1-inch longer. In either case, married to a roughly 4-inch handle, the blade should prove fairly nimble and quite deft at most everyday tasks around the home, ranch or worksite. As mentioned, the handle is skeletonized, which cuts the Pivot’s weight down to a svelte 3.2 ounces. And Outdoor Edge applies a rubberized coat to it, giving the knife a fairly positive grip even if wet.

Where Exactly Does It Pivot?

Now we get to the name of the knife—the Pivot—which seem much more apt for a folder than a fixed blade. But there’s a method in Outdoor Edge’s madness, with it referring to the carrying system. The polypropylene sheath comes with a quick-release locking latch and a removable 360-degree rotating clip (there’s the pivot point) for easy attachment to a belt or MOLLE webbing. It’s a nice system, allowing the user to adjust the cant to their carry style, putting the blade at quick access no matter where it’s carried.

Most would agree the Outdoor Edge Pivot isn’t the Superman of EDC knives, nor the one somebody pulls out for bragging rights. But for a blade to use and abuse on your day’s dirtiest jobs, well it pretty well fits the bill.

More On Fixed Blades:

Best EDC Fixed Blade Knife: A Cut Above The Rest
Four Battle Tough Military-Style Fixed Blade Knives
World War II Fixed Blade Knives
Fire Starter Knife: Blades Designed To Spark A Flame

The Joy of Cooking Knife Review

Steve Shackleford

-

October 18, 2024

0

Ethan Becker and Dan Eastland collaborate on a sharp tool for the kitchen.

Long-time knife designer Ethan Becker and Dan Eastland of Dogwood Custom Knives have collaborated on a chef’s knife that combines each of the principals’ vision of exactly what such a knife should be.

Introduced at BLADE Show 2024, the Joy of Cooking 8-inch K-tip chef’s knife is a mix of Japanese and Western styles and premium stainless steel and synthetic handle materials.

It also has the iconic Joy of Cooking logo on the blade, Joy of Cooking the internationally renowned cookbook originally written by Becker’s mother, Irma Rombauer, and edited in some subsequent editions by Ethan. He handed those duties off and today the book is co-edited most ably by his son, John, and Megan Scott.

The heel of the blade curves toward the rear and sits flat on the surface for controlled cutting.

With extensive experience as both a knifemaker and a cook, Eastland brings the kind of know-how to the project that gives it edged gravitas.

“Dan is pretty much the perfect person to do this because he’s been in a commercial kitchen and knows his way around that,” Ethan said.

Dan also spent a number of years as an apprentice maker to Georgia Knife Makers Guild member Andy Roy of Fiddleback Forge in North Georgia, and now builds knives at Dogwood Custom Knives in Greenville, South Carolina.

Joy of cooking knife handle — Handle materials come in a choice of natural (shown here; note the texture and grain) and black Micarta® and blue, red or black G-10.

As for the Joy of Cooking knife and its features, Dan approaches it all from the maker/cook perspective.

“The blade has a Japanese influence. I always liked Japanese blade geometry and balance, but I didn’t like their handles. Ethan and I both like a little palm swell,” he noted, “so we wanted more of a Western-style handle.”

In Joy of Cooking, Ethan writes about a grip for home cooks that’s comfortable, Dan said, so the handle has rounded corners to eliminate hot spots and an overall design that helps promote a pinch grip. The blade is weighted toward the front for balance and has the K tip for precise tip work.

Tip of the joy of cooking knife — The K tip gives the knife a piercing feature lacking in such Japanese designs as the santoku.

Ethan said he’s a big fan of the santoku style and has designed santokus and used them in the kitchen almost exclusively for 20 years.

“The one problem with the santoku is it really doesn’t have a good piercer,” he noted. “You can get by without a piercer if you keep the knife really sharp but guess what—most people don’t keep their knives sharp enough. But for such jobs as taking off the top of a tomato, for instance, the K tip works pretty good.”

Dan lauded the utility of the K tip for other tasks as well, adding, “My grandmother opened all the packaging with the tip of a kitchen knife. No matter what knife you gave her, she sliced the top of the package open with the tip and went to work.” The K tip is tailor made for such chores, as well as others.

Joy of cooking knife handle palm swell — The collaborators prefer a Western-style handle and gave the Joy of Cooking Knife grip a palm swell as a result.

The edge has a nice curvature for rock chopping and push cutting meats and vegetables. The heel of the blade also curves toward the rear and sits flat on the surface for controlled cutting.

“The neat thing is when the blade comes down [at the heel during a rocking cut or chop], it stops,” Ethan explained. “It’s also good for a push cut,” Dan added, “so it’s good for both a rock chop and push cut. And having that heel down a little bit it will bottom out, so you cut all the way through something and don’t wind up with little partially cut bits at the end.”

Joy Of Cooking Knife Details

The 8-inch blade is CPM S35VN stainless steel. The Rockwell hardness is 60 HRC and the blade is 3/32-inch thick at the thickest. Along with the contoured handle the knife weighs in at a scant 5.5 ounces.

Joy of cooking knife sheath — A hard plastic cover with plastic snaps contains and protects the knife.

“I’m of the opinion the Greeks told us everything we need to know about a double-inclined plane—the longer the plane and the lower the angle, the more efficient it is,” Dan said. “A knife blade is a double-inclined plane, and I wanted to make this knife as light as possible.”

He returned to his grandmother’s experience.

“And again, my grandmother used to complain that Henckels and Wusthof, she loved the knives, but they weighed almost as much as she did. By using the S35VN we’ve been able to thin it out and get a mechanically better cutting blade, but also a lighter blade.”

Ethan agreed that most kitchen knives are too heavy.

From left at BLADE Show 2024: John Becker, co-editor of Joy of Cooking, Dan Eastland of Dogwood Custom Knives and long-time knife designer Ethan Becker.

“The wrist gets tired easy and to be able to not have very much weight that you’re working with, hey, what’s wrong with that?” he observed. “Most traditional kitchen blades were thick because they were forged before they were ground … The cutlers in Europe were very, very concerned that the housewives would use the blades for things they weren’t supposed to, so they used soft steel so it wouldn’t nick and if they opened bottles with it it wouldn’t hurt it. The result was blades that didn’t hold an edge worth a damn and were not terribly efficient.”

Dan said the S35VN has good corrosion resistance and the edge retention is phenomenal.

“We tested the knife extensively in an industrial kitchen to ensure edge retention and durability, and I like S35VN because it’s a good balance of durability and edge retention. And we can get that 60 Rockwell so it can take a nice, keen edge and we don’t have to worry about it chipping out.”

As noted, Dan and Ethan wanted a Western-style handle with a palm swell and offer it in a choice of G-10 and Micarta®. The Micarta is available in black and natural versions, both with texture and grain for purchase. The G-10 comes in red, black and blue.

“Those colors will always be the same over time as we introduce other knives in the lineup, so you can buy a knife that will match whichever color knife you previously bought,” Dan said. The intent is for there to be a complete set of Joy of Cooking knives, though nothing was set in stone in that regard at press time.

Pros

Collaborative Expertise
Versatile Blade Design
Premium Blade Material

Cons

Higher Price Point
Plastic Snap Cover

Joy Of Cooking 8” Chef’s Knife Specs
Designers: Ethan Becker and Dan Eastland
Company: Dogwood Custom Knives
Blade Length: 8”
Blade Steel: CPM S35VN stainless
Rockwell Hardness: 60 HRC
Blade @Thickest: 3/32”
Handle: Black and natural Micarta® and blue, red and black G-10 options
Overall Length: 13”
Carry: Plastic snap cover
Knife to Know: K tip blade; lightweight design; hidden handle pins
Country of Origin: USA
MSRP: $200

More Kitchen Knives:

Best Tomato Knives
Henckels Everpoint Review
Best Custom Brisket Knives
What Is A Petty Knife

Tactical Fixed Blades: EDC With An Edge

Les Robertson

-

January 5, 2026

1

Don’t overlook small tactical fixed blades for everyday carry.

When most blade fans talk everyday carry (EDC) knives, they usually mean folders. The two main EDC advantages of folding knives are they are convenient to carry and, except for that pesky pocket clip, easy to conceal. Of course, while many overlook the clip, others know it indicates you are carrying a knife.

Folders are designed primarily for smaller everyday chores—opening a box, peeling fruit and so on. This is especially true of slipjoints, which rely on you cutting away from yourself—which you should always do with all knives—and a half-stop as a safety device. Granted, when slipjoints were popularized long ago, lockback, linerlock and framelock folders were unavailable. The problem with both slipjoints and lockbacks is most take two hands to open and close, which, if you are trying to cut something you simultaneously must hold, can be inconvenient at the very least.

The late 20th and early 21st centuries saw a boom in the commercial availability of manual folders that could be opened and closed with one hand. Utilizing the flipper opener and the roller bearing system made the blade deploy quickly and smoothly, often even quicker than an automatic. With the perfection of linerlocks and framelocks, unlocking and closing the manual folder with one hand was no longer a problem.

Kydex sheaths can be molded to fit the blade and, over time, will not deform, providing a safer carry option. Rafal Kolakowski uses Kydex® for the sheaths of his Ridgeline set of small tactical EDC fixed blades.

Even with these technical improvements, the folding knife still has its limitations. A small blade can do only so much before it bends or, in some cases, breaks. Some tactical folder makers tried to address this issue by making folders with 5-inch blades of 1/4-inch stock. This was done primarily for cosmetic reasons without addressing the folder’s primary weakness—the pivot. The very nature of the pivot means it must allow some side-to-side movement of the blade, no matter how slight. If the folder is used for an unintended purpose or put under undue force, the blade can be moved off-center.

On top of that, folding knives require more regular maintenance than fixed blades. Locking folders with back straps and slipjoints with backsprings collect dirt, lint, etc., during daily use and must be cleaned. What’s more, using a folding knife beyond its capabilities and failing to perform regular maintenance can affect its opening and closing ability. Lastly, a folder cannot do anything until you first deploy the blade.

Fixed-Blade Pros

Fixed blades, on the other hand, offer several advantages. As already suggested, larger fixed blades can do tasks that smaller blades either can’t perform or do so with difficulty.

Finger/thumb serrations on the blade spine of Al Polkowski’s Boot Fighter help with controlling the knife in use.

One of the fixed blade’s most significant advantages is full-tang construction, providing added strength and durability. A full-tang fixed blade especially is better suited for heavy cutting and repeated hard use, and safer for use with a heavy load.

A fixed blade also has a superior mechanical advantage. Unlike the folding knife, there is zero chance of mechanical failure under stress. Locks and pivots can fail, especially when using the knife for tasks for which it is not intended.

Another advantage is the style and size of the blade. Fixed blades can feature longer and thicker blades that will perform better under the rigors of hard use.

Full-tang fixed blades such as the Trailhead set by Tomasz Dziubinski are better suited for heavy cutting and repeated hard use, and safer for use with a heavy load.

A fixed blade typically will have better handle ergonomics. Its handle is usually designed for prolonged use, featuring a more comfortable grip that also aids in balance and is ready for immediate deployment. While many folders can be opened with one hand, not so slipjoints. If your hands are cold, wet, injured or gloved it can present a problem as many, if not all, slipjoints require two hands to deploy the blade or blades. On the other hand, with the correct sheath combination, a fixed blade can be rapidly deployed under almost any circumstance.

Sheath Concerns

Top material options for EDC fixed-blade sheaths are leather and Kydex®. Kydex gained popularity because it provides two main advantages over leather.

First, most makers can build at least a rudimentary kydex sheath. Leather sheaths are more of a challenge. Second, Kydex does not hold moisture and does not require tannic acid, which is used in the processing of leather. This is very important for EDC. Tannic acid in the leather can cause carbon steel to discolor. Leather, once wet, can shrink and/or deform, allowing the blade to accidentally cut or poke through it.

Conversely, Kydex does not hold moisture and does not require tannic acid. Kydex can be molded to fit the blade and, over time, will not deform, providing a safer carry option. Finally, the clip attachment on most Kydex sheaths can be adjusted to wear in either a vertical or horizontal position.

They Have The Edge

With the right sheath combination, a fixed blade can be rapidly deployed under almost any circumstance. The Street Scalpel by Rafal Kolakowski with Kydex® sheath and breakaway chain is a classic example.

I’m not suggesting that folders do not have advantages as EDC knives; they do. They are usually more comfortable and concealable to carry than fixed blades. They are more socially acceptable and usually have limited legal restrictions. They can provide versatility for light tasks such as opening letters, boxes, cutting cord, etc.

It is in fact the EDC folders’ size that is its biggest disadvantage. The smaller blades and less ergonomic handles limit the number of tasks folding knives can perform. Also, their moving parts provide a mechanical disadvantage when compared to EDC fixed blades.

The majority of this story’s featured tactical fixed EDCs have a 4-inch or shorter blade. Many tactical EDC folders also have 3.75-to-4-inch blades. When open, they are about the same length as the featured fixed blades.

With perhaps the exceptions of concealability and some legal restrictions, fixed blades have the edge. Depending on what you are using it for, you may want to consider a knife that has the mechanical advantage, requires less maintenance, can be easier to deploy in difficult situations or environments, and is more comfortable in the hand: fixed blades, the other EDC!

Rebel Specs
Knife type: Small tactical EDC fixed blade
Blade Length: 4.25”
Blade Steel: Elmax stainless
Blade Finish: Two-tone satin and bead blast
Handle Material: Textured black Micarta® w/OD green Micarta liners
Overall Length: 9”
Sheath: Custom-built by the maker; Kydex®
Author’s Comments: “Excellent all-around knife … the tip is ground to give the knife extra penetration … the texture of the black Micarta on the handle gives the user additional traction … primarily designed for belt wear, the clip can be configured for additional carry options … serrations along the top of the blade enhance the knife’s ability to handle small chores … a great knife that provides lots of user options.”
Maker’s price: $430

Ridgeline Specs
Knife type: Small tactical EDC fixed blade
Blade Length: 4”
Overall Length: 8.75”
Blade Steel: Becut stainless
Blade Finish: Satin
Handle Material: Black G-10
Sheath: Custom-built by the maker; Kydex®
Author’s Comments: “Double-hollow-ground blade with a fuller for added strength … full-tang construction … sculpted handle material for enhanced ergonomics … stainless-steel-tube-lined thong hole.”
Maker’s Price: $350 each

Boot Fighter Specs
Knife type: Small tactical EDC fixed blade
Blade Length: 4”
Blade Steel: 154CM stainless
Blade Finish: Bead blast
Handle Material: Black and green G-10
Overall Length: 8.25”
Sheath: Custom-built by the maker; Kydex®
Author’s Comments: “Great little back-up knife … it features a double-hollow-ground double edge with an extended tang that features a thong hole … quick and light in the hand.”

Trailhead Specs
Knife type: Small tactical EDC fixed blade
Blade Length: 3.5”
Blade Steel: Sleipner stainless
Blade Finish: Black Cerakote®
Handle Material: OD green G-10
Overall Length: 8.25”
Sheath: Custom-built by the maker; Kydex®
Author’s Comments: “Flat-ground, upswept utility-style blade … full-tang construction, excellent handle ergonomics … small knife built for hard work … stainless-steel-tube-lined thong hole … perfect knife for camping, a hike and everyday carry.”
Maker’s Price: $280 each

Street Scalpel Specs
Pattern: Tactical fixed-blade neck knife
Blade Length: 2”
Blade Material: 80CrV2 carbon steel
Blade Finish: Black Cerakote®
Handle Material: OD green G-10
Overall Length: 5.9”
Sheath: Custom-made, multi-position in Kydex® by the maker w/ball-bearing breakaway chain
Author’s Comments: “Perfect for utility or self-defense … the attachment holes on the sheath allow the knife to be carried however you like.”
Maker’s Price: $280

More Knife Reviews:

Sharps Bros. Meanstreak Review: Keen, Mean Cutting Machine
Relentless Knives Curved Fillet Knife Review
Cold Steel Finn Bear Review: Light, Sharp And Up To Snuff
Spartan Blades Clandestina Review: 2024 Blade Knife of the Year

Fixed Blade Knives